E-Lins M300 Series User manual
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
M300 Series Industrial Modem
User Manual
E-Lins Technology Co., Ltd
ADDRESS: Bld22., Longxi Garden, Nonglin RD., Futian District, Shenzhen, 518000, China
PHONE: 86-755-83700465
WEB: http://www.szelins.com
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
Content
1PROLOGUE························································································································3
1.1 VERSION························································································································· 3
1.2 REFERENCED DOCUMENTS······························································································ 3
1.3 NOTICE··························································································································· 3
2INTRODUCTION·················································································································4
2.1 BRIEF ····························································································································· 4
2.2 FEATURES ······················································································································ 4
2.3 SPECIFICATION················································································································ 5
2.4 APPLICATION··················································································································· 6
3GETTING STARTED···········································································································8
3.1 PANEL INTRODUCTION······································································· 错误！未定义书签。
3.2 THE LED STATE ··············································································· 错误！未定义书签。
3.3 HARDWARE CONFIGURATION ····························································· 错误！未定义书签。
3.4 CONNECT TO PRODUCTS·································································································· 8
3.5 INSERT SIM CARD··········································································································· 8
3.6 NOTE:HYPER TERMINAL ································································································· 8
3.7 TEST COMMAND ············································································································ 12
4CONFIGURE DIRECTORY·······························································································13
4.1 ABOUT SMS ················································································································· 13
4.2 ABOUT CSD ················································································································· 13
4.2.1 Introduce CSD·······························································································13
4.2.2 Getting started·······························································································13
4.2.3 Mutuality command ·······················································································13
4.2.3.1 Generally command·····································································13
4.2.3.2 Set the auto answer in ringing ·····················································14
4.2.4 Test ···············································································································14
4.3 DIAL-UP ························································································································ 15
4.3.1 Setup Modem································································································15
4.3.2 Setup 19200 Modem·····················································································18
4.3.3 Create Dial-up network··················································································23
4.3.4 Login on network···························································································31
4.4 SETTING APN OR VPDN ······························································································· 31
4.4.1 Setting APN···································································································32
4.4.2 Setting VPDN ································································································34
5PRODUCTION LIST ·········································································································35
6TERMINOLOGY················································································································36
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
Chapter1
1 Prologue
This document is just suit for the following mode type; it helps you quickly to used M300Modem function and
resolves some common questions.
1.1 Version
Version No. Date Description
1.00 2008-07-07
1.01 2008-07-14 Add FAQ
1.02 2008-8-19 Add ZTE S/W operation
1.2 Referenced Documents
EL-M300 Series Modem Datasheet.pdf
1.3 Notice
The copyright of the document belongs to E-Lins Technology Co., Limited. Copying of this document and
modifying it and the use or communication of the contents thereof, is forbidden without express. Authority,
Offenders are liable to the legal sanction.
Type Marks
M300e EDGE Modem
M300ev EVDO Modem
M300d
M300u
HSDPA Modem
HSUPA Modem
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
Chapter2
2 Introduction
2.1 Brief
With the development of wireless communication technologies, wireless products are being adopted in
numerous industrial and civilian fields. E-Lins Technology Co., Limited is a leader of wireless communication
equipment manufacturer releases the Wireless Modems, which support various frequency bands of
EDGE/EVDO/HSDPA, and provide industrial terminal solutions for 2.75G/3G communication.
M300 series wireless modem adopts industrial level modules, specially designed for the complicated industrial
environment which compatible with EMC, and will be your best choose of wireless communication.
2.2 Features
zRemote Data Monitor and Control
zWater, gas and oil flow metering
zAMR (automatic meter reading)
zPower station monitoring and control
zRemote POS (point of sale) terminals
zTraffic signals monitor and control
zFleet management
zPower distribution network supervision
zCentral heating system supervision
zWeather station data transmission
zHydrologic data acquisition
zVending machine
zTraffic info guidance
zParking meter and Taxi Monitor
zTelecom equipment supervision (Mobile base station, microwave or optical relay station)
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
2.3 Benefits and Features
zIndustrial design with intelligent software capabilities, making it a reliable cellular solution for data
collection and transmission
zPlug-and-play design with easy-to-use software interface for easy integration
zEasily manage and control distributed remote devices over the air
zBuilt-in Watch Dog
zReal-time Clock (RTC)
zRemote Data Monitor and Control
zReliable GSM/GPRS/CDMA/EVDO network connectivity, providing fast and cost-effective long-range
wireless communication
zAlways-On-Line
zEasy-to-use
zIndustrial design with surge protection
zLocal and remote configuration over the air , No need to build expensive fixed line network, saving cost
substantially
2.4 Specification
M300e Radio Frequency
GSM Phase2/2+
GSM (EGSM) 900MHzDCS (GSM) 1800MHz or GSM850/900/1800/1900Mhz
Output power: 2W (GSM900MHz Class 4) 1W (DCS1800MHz Class 1)
M300ev Radio Frequency
TIA/EIA-95B, CDMA2000 1X
Band class 0: 800MHz
Band class 1: (USPCS 1900MHz)
450Mhz is optional
M300d/M300u Radio Frequency
WCDMA/UMTS HSDPA Band: 2100Mhz or 2100/1900/850Mhz tri-band
Support E-GPRS Class 10, GPRS class12
EDGE Quad-Band GSM
850/900/1800/1900 MHz
Output power:
Class 4 (2 W) for EGSM850
Class 4 (2 W) for EGSM900
Class 1 (1 W) for GSM1800
Class 1 (1 W) for GSM1900
Data transfer
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
SMS:
Point-to-point MO and MT
SMS cell broadcast
Text and PDU mode
CSD up to 14.4 kbps, USSD, Non transparent mode, V.110
Fax: Group 3, Class 1, 2
Audio: Half Rate (HR) Full Rate (FR) Enhanced Full Rate (EFR)
Interface
Plug in power supply
Mini-SIM card reader
Standard RS-232/485/TTL
Standard serial Port (DB-9)
SIM interface: 3V And1.8V
Shell:
Steel shell: good electromagnetic shield and, heat radiate performance
Environment
Ambient temperature: –20 centigrade degrees ~ +60 centigrade degrees
Storage temperature: -50 centigrade degrees ~85 centigrade degrees
Humidity: ≤90%
Electromagnetic Compatible
Electrostatic Discharge (ESD): 3 class
Radiated, radio-frequency, electromagnetic field immunity test: 3 class
For details, please refer to the related Datasheet.
2.5 Application
zRemote Data Monitor and Control
zWater, gas and oil flow metering
zAMR (automatic meter reading)
zPower station monitoring and control
zRemote POS (point of sale) terminals
zTraffic signals monitor and control
zFleet management
zPower distribution network supervision
zCentral heating system supervision
zWeather station data transmission
zHydrologic data acquisition
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
zVending machine
zTraffic info guidance
zParking meter
zTelecom equipment supervision (Mobile base station, microwave or optical relay station)
zOil field data acquisition
zWarehouse supervision
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
Chapter3
3 Getting Started
3.1 Connect to product
1. Please connect antenna and cable with our products, make sure the following
The port is COM1 or COM2.
3.5 Insert SIM Card
2. Open the SIM Card Slot and insert into SIM card,
3.6 Note: Hyper Terminal
3. Open the HyperTerminal and input ***( any) as follows
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
4. Choose a right port
5. The right configuration as following
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
（图 3-3）
6. When your start-up Hyper Terminal, it is not connected really, you can see the red mark of follow
picture without any number .And then, first Disconnect existing connection, second ,Click the red
arrowhead
7. Click the “configure”, and double confirm your modified configuration
Nobaudrate
Second,click
“attribute”tab
One‐step,Disconnect
existingconnection
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
8. Double confirm your modified configuration and click “OK”
9. Then you can see it appeared baud rate on white label, then click the black label to make call
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
10. provide power supply with our products, you configured the Hyper Terminal successfully
3.7 Test command
Test AT command
AT<CF> //Test “at“command
I/OK //Response ok parameter if successfully connected, you can make sure the
module have no malfunction
AT+CSQ<CF> // to check the Signal quality
+CSQ: **, ## // ** Should be the number between 10 and 31, the signal quality becomes better
as the number grows. ## should be is 99, Or you should checking
the equipment of antenna or SIM card.
If you succeed in testing command, at now, you can begin to use Modem
HaveshowdetectBaud
Makecall
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
Chapter4
4 Configure directory
4.1 About SMS
How to used SMS:
Please follow the SMS User Manual
4.2 About CSD
4.2.1 Introduce CSD
CSD (Circuit Switched Data) is 9.6kbps speed circuit Switched Data from GSM network,
GSM+2 operations could attainability 14.4kb/s speed. and encrypts the data at the same time, so the GSM
system has the encryption function. It can connect with the line Modem,
4.2.2 Getting started
zConnect two modems with each two computers” cable and open up Hyper Terminal
zSetting Modems baud rate 9600bps
zRegister the CSD function. if you used this function, the SIM card have Register CSD. Dredge CSD
Function usually have two number. one is “pn” for voice message .and other is” un” for date message
4.2.3 Mutuality command
4.2.3.1 Generally command
ATD136****** //make call
ATA //answer a call
+++ //Switch from date mode or PPP online mode to command mode
ATO //Switch from command mode to data mode or PPP online mode
ATH //Disconnect existing Connection
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
4.2.3.2 Set the auto answer in ringing
ATS0=n //Set number of ring before automatically answering the call
AT+IPR=n //Setting Baud Rate of Module (default is auto-acclimatize)
Note: n=0/300/600/1200/2400/4800/9600/14400/28800/38400/57600/115200 (in M12S211, this parameter default is 0; in
M12H111, this parameter default is 115200)
4.2.4 Test
Initialization commands”
AT&F0 // renew default parameter
AT+IPR=9600 // setting fixed baud rate
AT&W // save parameter
Initialization command of Callee
ATS0=1
Initialization command of caller
ATD[dn] //note: not ending as” ; “is data call, end as”;” is voice call make call [dn ]is data
number.
Callee answer command
ATA // answer call
Communicate account command
+++ // abort communicate, return command mode
ATO // Switch from command mode to data mode or PPP online mode
Disconnect existing Connection
ATH // Disconnect existing Connection，in command mode
When Callee receives a ring, it answers automatically. Both them will show connect 9600and enter data
state .then you can used CSD.
There is a simple test course; it is suitable for modem products, and fit for the wireless modem connect with
line modem.
The Connecting mode of the CSD is same with line modem, even replace, but it is expensive, and not always
online, only point to point, can not be one point to many points (center need to use modem, if come true point
to point)
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
4.3 Dial-up
Dial-up to connect network in windows XP operation System
4.3.1 Setup Modem
Please connect Modem with your computer Rs232 interface cable .then Start from “Control Panel”, click
“Phone and Modem Options”, and select “Modem”:
click “New location” to add a new modem:
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
Tap “Don’t detect my modem; I will select it from a list “, and then click” Next” to continue
When appear “install new modem” dialog box, choose “standard Modem Types” in the left manufacturer, and
choose “Standard 19200 bps Modem” in the right Models
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
Select COM port: Choose the right port (it depends your computer, may be not
“COM1”.), and click “next” then you will finish installation.
When appear Following Frame, Click “Finish” to succeed your modem installation.
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
4.3.2 Setup 19200 Modem
Click “Phone and Modem Options” from “Control Panel”, Click “Modems” tab; select the modem that choose
the” Standard 19200 bps modem”, and then click “Properties” button.
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
At “Modem” tab, set the “Maximum Port Speed” to “115200”.
Choose “Diagnostics” tab, click the “Query Modem, if Baud rate setting and so on is right, there are automatic
indication that it is have pass
M300 Series Modem User Manual
E‐LinsTechnologyCo.,Limited
Add:Bld22.,LongxiGarden,NonglinRD.,FutianDistrict,Shenzhen,518000,China
Tel:+86‐755‐83700465E‐mail:sales@szelins.comwww.szelins.com
Next, click “Advanced” tab, Here, you can add or change settings by filling in Extra initialization commands at
“Advanced” tab
M300d Extra initialization commands: AT+CGDCONET=1, IP, CMNET
EL-M300d2 Extra initialization commands: AT+CGDCONET=1, \”IP\”, \”CMNET\”
EL-M300ev Extra initialization commands: AT&D2
Notes:CMNETistheAPNfromthenetwork.DifferentnetworkproviderhasdifferentAPN.Pleaseconfirmbefore
setting.
Other manuals for M300 Series
1
Table of contents
Other E-Lins Modem manuals
