Zoom Series 1057 User manual

PCI MODEM
This Quick Start describes PCI modem installation for
computers using Windows®98, Me, 2000, or XP.
Quick Start
Make sure you have the following:
modem telephone cord software CD
free PCI slot in your computer
Important: You must run the setup software before installing the
modem card.
If your computer already has an internal PCI modem
installed, you should remove the modem and its drivers now.
Your old modem may interfere with the installation of your new
modem. Please refer to page 6 now.
Installing the Drivers
1Your computer should be on. Close any running
applications.
Insert the CD that came with your modem into your CD-
ROM drive. If the CD does not start automatically, double-
click My Computer on your desktop; then double-click the
icon for your CD-ROM drive. If the installation program
doesn’t begin immediately, double-click Setup.exe.
2When the main installation menu opens, click Install
Modem Drivers and then click PCI Drivers.
The installation program runs and automatically copies
driver files to your hard drive. Follow the prompts.
3When asked whether or not you want to restart your
computer, select No, I will restart my computer later,
click Finish, return to the CD’s main menu, exit, and shut
down manually. Continue with Installing the Modem
Card, below.

2
Installing the Modem Card
1Before you start the hardware installation, close all
running programs and shut down Windows if you have
not already done so. Turn your computer off and unplug
it. Don’t plug it back in or turn it on until you complete the
modem hardware installation.
2Take the cover off your computer.
3On the rear of the computer, unscrew and remove the
metal cover plate that lines up with a free PCI slot. (Save
the screw.)
CAUTION
Do not handle any internal modem card when the
phone line is plugged into it. The voltage present
when the line is ringing is potentially harmful.
CAUTION
Electrostatic Discharge Protection
Static electricity can damage modem components
or your computer. Before removing the modem
from its antistatic bag, touch the computer’s metal
chassis to statically discharge yourself.
4Remove your new modem from its antistatic bag and
make a note of its serial number.

3
5Slide the modem card firmly into the free PCI slot.
Be sure that the back end of the card (smaller gold finger
area) is properly seated into the connector. If you have a
tower or mini-tower computer case with a vertical main
board, lay the computer down on its side so you can
push straight down on the modem card to seat it firmly in
its slot. Be sure that the bracket is lined up properly, then
screw the bracket into the computer using the screw you
removed earlier.
6Replace the computer cover.
7Connect the telephone cord:
Plug one end of the phone cord into the jack marked
LINE. Plug the other end into a phone jack (typically the
wall jack where you would normally connect a phone).
OPTIONAL: Plug your phone into the PHONE jack if you
want to use a phone on the same line.
If you do not use the supplied telecommunications cord,
use an equivalent of minimum AWG 26 line cord.
8Plug in your computer and turn it on.
9Windows 98/Me Users: As Windows starts up, it detects
your new modem. Because the installation program has
already provided your computer with the required files,
you will see Windows reporting on its progress, but no
action is required on your part. Continue below with
Completing the Installation.
PCI slot
Metal cover plate

4
Windows 2000 Users: A few seconds after startup, you
may see the Digital Signature Not Found dialog box.
You can safely ignore this message and click Yes.
Continue below with Completing the Installation.
Windows XP Users: When the Found New Hardware
Wizard dialog box appears, click Next. You may see a
disclaimer box regarding Windows logo testing. You can
safely disregard this message and click Continue
Anyway. Continue with Completing the Installation.
Completing the Installation
1Open Control Panel (and, in Windows XP only, click
Printers and Other Hardware). Then double-click the
Modems or Phone and Modem Options icon.
2You may be asked to fill out Location Information if you
have not had a modem installed previously. Type the
required information and, when done, click OK or Close.
Windows XP and Windows 2000 Users: Click the
Modems tab, under Phone and Modem Options, to
proceed to Step 3.
3Select the entry for your new modem and then click
Properties.
4Set the Maximum speed to the highest speed available
(115,200).
Windows XP Users: You have to click the Modem tab
before you can set the Maximum speed.
Click OK and close the currently open dialog box.
5Click the Diagnostics tab. In Windows XP, click Query
Modem. Select the port next to the entry for your new
modem (for example, COM3) and click More info or
Query Modem. This step tests the modem by querying it
with AT commands. A list of responses means that your
new modem is properly connected.
CONGRATULATIONS! You have successfully installed your PCI
modem. Installing the Communications Software, described
below, is optional. For removal instructions, see page 6.

5
Important—If Your PC Had an Existing Modem
You must redirect your application software so that it recognizes
your new modem.
America Online Users: From the AOL Welcome screen, click
the Setup button; then click Expert Setup. Select the Devices
tab and double-click the name of your new modem.
Dial-up Networking Users: From your computer’s desktop,
double-click My Computer and then Dial-up Networking.
Double-click the Make New Connection icon, select your new
modem from the dropdown list, and follow the prompts.
Tip: If your modem is not working, first try turning off your
computer and restarting it. Sometimes this will help Windows
identify and activate the correct drivers.
If you ever need to reinstall the operating system
You must physically remove the PCI modem first. After
reinstalling the operating system, reinstall the modem following
the instructions in this Quick Start.
Installing the Communications Software
The accompanying CD describes the communications software
included with your modem and provides easy point-and-click
installation. If necessary, consult the CD’s online help. Please
run the modem’s CD now. You should not install the drivers
again, but you may install any application software you like.
How to Use NetWaiting Modem-on-Hold
Your modem includes the NetWaiting Modem-on-Hold program
from BVRP Software. Basic information on this software is
included here. For more details, please refer to NetWaiting’s
built-in help.
Note: Your Internet Service Provider must support the V.92
protocol for all the Modem-on-Hold features to work. Contact
your provider if you are unsure. You must have Call
Waiting/Caller ID (Type 2 Caller ID) service from your telephone
company to use the modem’s Call Waiting/Caller ID feature.
When you turn your computer back on after installing your
modem software and hardware, you will see NetWaiting’s phone
icon in your computer’s system tray at the bottom right of the

6
screen. (If you do not see it, from the desktop go to Start |
Programs | NetWaiting, and select NetWaiting to display the
icon.)
Tip: To avoid the need to reactivate Modem-On-Hold every time
you log on, right-click the NetWaiting icon and select Settings |
Launch at Windows startup.
If someone calls while you are online, the NetWaiting dialog box
appears on your computer screen, offering three choices.
•Click the green OK icon to place your Internet connection on
hold and accept the call.
•Click the red Xicon to reject the call and remain connected
to the Internet.
•Click the yellow
Disconnect icon to drop your Internet
connection and accept the call.
Note: The length of time that your modem can be on hold varies
depending on your ISP.
Removing a PCI Modem and Its Drivers
You should follow these instructions if your computer already has
a PCI modem installed, and you want to replace it with your new
modem.
1From the desktop, open Control Panel, and then click
Add or Remove Programs. In the dialog box that opens,
select the modem that you want to uninstall and click
Remove. (Depending on your operating system, some of
these buttons may have slightly different labels.)
2Follow the on-screen instructions and click Finish.

7
3In one of the subsequent dialog boxes (depending on your
operating system, Modems, or Phone and Modem
Options, or Modem Properties), select the modem you
want to uninstall and click Remove.
4•Take the cover off the computer.
•Unplug any cords connected to the card.
•Remove the screw that is holding the modem card in
place and slide the card out.
Regulatory Information
Compliance
FCC and additional compliance information can be found on the included CD.
Electrostatic Discharge Statement
The unit may require resetting after a severe electrostatic discharge event.
Safety Notices
CAUTION: To reduce the risk of fire, if you do not use the supplied phone cord,
use only No. 26 AWG or larger UL listed or CSA certified telecommunication line
cord.
Do not use this product near water – for example, in a wet basement or near a
swimming pool.
Avoid using this product during an electrical storm. There may be a remote risk of
electric shock from lightning.

3336-B 27443 ©2006
Declaration of Conformity
Declaration of Conformity Déclaration de conformité Konformitätserklärung
Δήλωση Συμμόρφωσης Dichiarazione di conformità Deklaracja zgodności
Declaración de conformidade Konformitetsdeklaration Uyum Beyanatı
Declaração de Conformidade
Brand/Varemærke/Merk/Marque/Marke/
Μάρκα/Marchio/Marka/Marca/Märke/
Thương hiệu
PCI Modem
Type/Typ/Μάρκα/Tipo/Türü/Kiểu mẫuSeries 1057
The manufacturer declares under sole responsibility that this equipment is compliant to
Directive 1999/5/EC via the following. This product is CE marked.
Producenten erklærer under eneansvar, at dette udstyr er i overensstemmelse med
direktivet 1999/5/EC via følgende. Dette produkt er CE-mærket.
De fabrikant verklaart geheel onder eigen verantwoordelijkheid dat deze apparatuur
voldoet aan Richtlijn 1999/5/ EC op grond van het onderstaande. Dit product is voorzien
van de CE-markering.
Le constructeur déclare sous son entière responsabilité que ce matériel est conforme à
la Directive 1999/5/EC via les documents ci-dessous. Ce produit a reçu le marquage CE.
Hiermit erklärt Zoom die Übereinstimmung des Gerätes modem mit den grundlegenden
Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EC.
Dieses Produkt ist das gekennzeichnete CE.
Οκατασκευαστής δηλώνει με αποκλειστική του ευθύνη ότι αυτό το προϊόν
συμμορφώνεται με την Οδηγία 1999/5/ΕC μέσω των παρακάτω. Αυτό το προϊόν φέρει τη
Σήμανση CE.
Il fornitore dichiara sotto la sola responsabilità che questa apparecchiatura è compliant a
1999/5/EC direttivo via quanto segue. Questo prodotto è CE contrassegnato.
Producent stwierdza że to urządzenie zostało wyprodukowane zgodnie z Dyrektywą
1999/5/EC. Jest to potwierdzone poprzez umieszczenie znaku CE na urządzeniu.
O fabricante declara sob sua exclusiva responsabilidade que este equipamento está em
conformidade com a Directiva 1999/5/EC através do seguinte. Este produto possui
Marcação CE.
El fabricante declara bajo su exclusiva responsabilidad que este equipo satisface la
Directiva 1999/5/EC por medio de lo siguiente. Este producto tiene marca CE.
Bu ürünün imalatçısıtüm sorumluluk kendisinde olmak kaydıyla bu cihazın aşağıdaki
tabloda gösterilen biçimde 1999/5/EC (R&TTE Yönetmeliği) no.lu Yönetmeliğe uygun
olduğunu beyan etmektedir. Bu ürün CE İşareti taşımaktadır.
Nhà sản xuất cam kết với trách nhiệm của mình là thiết bịnày tuân theo Hướng dẫn
1999/5/EC thông qua các mục sau. Sản phẩm này được đánh dấu là CE.
73/23/EEC - LVD EN 60950-1:2001
9/336/EEC - EMC EN 55022:1998 +A1: 2000 + A2: 2003
EN 55024:1998 +A1: 2001 + A2: 2003
Andy Pollock
29 November 2006
1057 TCF/TF
Director, Hardware Engineering/Direktør, Hardware
Engineering/Director, Sustaining Engineering/Directeur,
ingénierie de soutien/Direktør, Sustaining Engineering/
Διευθυντής, Μηχανικής Διατήρησης/Direttore, Hardware
Engineering/Dyrektor, Inżynieria ciągła/Director, Engenharia
de Manutençã /Director, Ingeniería de apoyo/Donanım
Mühendisliği, Müdür/Giám Đốc Kỹthuậtn cứng