E-Seek M300 User manual

E-SEEK Inc
Breakthrough Technology in Bar Code
M300 Quick Start Guide
Features
12D & Linear Barcode Reader
2Full Color LCD Display
3Power Button
4Key Push Button
5LED Indicator
6Magnetic Stripe Reader
7Smart Cart Reader
1
3
2
7
6
5
4
8
12
10
9
11
8Reset Button
9Speaker
10 Strap
11 Rubber Feet
12 Rechargeable Battery
13
16
14 15
13 Stylus
14 USB Host Port
15 RS232 Serial/USB Device Connector
16 Power Connector
Getting Started
1- Charge The battery
NOTE Do not turn on or connect the M300 to the computer at this
time.
NOTE Charging the battery full can take up to three hours.
The Model M300 is shipped with the rechargeable battery installed.
Connect the AC/DC power supply to the Model M300 power
connector, look for the LED indicator to be red in color. When the
LED indicator changes color to green, the battery is fully charged
and the Model M300 is ready for use.
2- Download & Install Active Sync
From Microsoft website (link below), you can download and install
latest Active Sync into the host computer.
http://www.microsoft.com/windowsmobile/activesync/default.mspx
3- Communication
A USB Cable (CN8000) is include with each unit, this cable enables
the communication between the M300 and host computer.

E-SEEK Inc
M300 Quick Start Guide Scanner
R & D Center
4360 Viewridge Ave #B
San Diego, CA 92123
858-495-1900
Sales & Marketing
245 Fischer Ave #D5
Costa Mesa, CA 92626
714-394-5789
714-545-3316
www.e-seek.com
>> Linear and 2D Barcode Reader
ID cards and driver’s licences can be read with the E-SEEK 2D
Bar code Scanner.
Scanning the barcode is as simple as inserting the ID card and then
removing it in one complete motion. The decoded information will
be passed to the application software via Com 2.
>> Magnetic Stripe Reader
Any magnetic stripe can be read and decoded with the E-SEEK
magnetic stripe reader.
The reader provides full three track reading capabilities and it is
bidirectional, so the card maybe swiped in either direction.
>> Smart Card Reader
The information contained in a standard contact smart card can be
read by the M300 Smart card Reader. Simply insert the smart card
in the reader.
>> Performance Characteristics
Card Operating
Mode
Manual Insertion of ID Card , Mag Stripe
Swipe action or Smartt Card Insertion
Display TFT 3.5” LCD display with 240x320 pixels,
260K colors, high bright LED backlight and
touch screen
Operation Hand-held or stand-alone
Memory 64 MB RAM & 64 MB Flash (40 MB for
data)
CPU Powerful 32 bits ARM9 processor
Operating System Microsoft Windows CE 5.0
Notication 2-color LED light
Communication
Ports
RS-232C, USB host and USB Device
Key Pad Easy access key buttons - 17 key push
button numeric
Main Battery Rechargeable battery (Lithium-ion 3.7 V
1800 mAH)
Battery Chargers AC-DC or USB port
Power AC-DC Power adapter
Audio Speaker sound