EarthWise ST00009 User manual

9-IN STRING TRIMMER
ST00009

Insert the tabs of the guard into the slots
located at the rear of the motor housing.
insert the tabs of the guard
into the slots located at the rear of the motor housing. With
Secure with two (2) screws.
ASSEMBLE THE BODY
Remove protective tape from
blade on the guard.

Before you start the unit, make sure the trimmer is not
contacting any object.
Squeeze the trigger with your fingers. To turn the tool
OFF, release the trigger.
Firmly push the tabs on both sides of the hub to release it
and remove along with the spool from the cutting head.
Position hub over spring and align tabs with rectangular openings.
Press firmly on tabs and push until hub snaps into place.
Firmly push the tabs on both sides of the hub to release it
and remove along with the spool from the cutting head.
TAB

Line tangled in spool Unwrap 24 inch of line and rewind
Line won t feed
GAP
TAB
TAB

ST00009
11000
2.87 lb.
9 in.

one (1)
www.earthwisetools.com

ST00009
9 IN

GAP
RESORTE
ORIFICIO

ST00009
11000
2.87
9 in
23

uno (1)
www.earthwisetools.com

ST00009

Avec un tournevis cruciforme,

Pincer le contacteur avec vos doigts.