EARTO A2133 User manual

iPad Mini 5 Keyboard Case
iPad Mini 4 Keyboard Case
( Not fit iPad Mini 1 / 2 / 3 )
(A2133 / A2124 / A2126 / A2125)
(A1538 / A1550)
Any question, please contact us via the above email address (not via Amazon).
User Manual
Load/Upload your iPad
Congratulations! Thank you for choosing our iPad keyboard case. Before using the keyboard case,
users should read this manual to familiarize themselves with the wireless functions of your iPad.
!
Get Start
Email: [e-mail]
Website: www.earto.com
(Not via Amazon)
Contact us:

Keyboard Overview
1. Home (Displays the iPad home screen)
3. Search (Launch the iPad search function)
5. Stick
7. Play/pause
9. Mute
11. Volume up
2. Virtual keyboard
6. Back
8. Forward
10. Volume down
12. Lock screen (Locks the iPad screen)
4. Copy
Capital Indicator Light
Wireless Connect Indicator
Charging lndicator Light
A
1 2 3 4 5 6 7 8 9 10 11 12
1. Bluetooth connection
+
3. Darker/backlit switch+
+
2. Switch input language
+
5. Switch backlight color
4. Brighter+
+
+
+
+
6. Caps Lock &tabulator key
7. If you want to type the words in red area, Like"@you need to press
8.If you want to type the words in green area, Like"+", you need to press
9.If you want to type the words in cyan area, Like"=", you need to press
10.Some special short characters
Cut Paste Selectall Copy
+ + + +

Light Indica�on
Blue LED Blinking: Pairing
Red LED On: Charging
Red LED Blinking: Low in battery
Green LED On: Battery is full charged
Troubleshoo�ng
If the keyboard fails to work, please check if:
1.The battery is too low. Fully charge the keyboard (no less than 2 hours) for the first time to extend battery life.
2.You have entered the prompted code correctly.
3.The keyboard is located within 33 feet from your iPad.
4.You have enabled Bluetooth on your iPad.
I can’t get my Bluetooth connected:
Step 1: Move ON/OFF switch to ON.
Step 2: Press “fn + C” ( Note: Paring indicator light will begin blinking)
Step 3: Toggle Bluetooth On in the Settings app on your iPad.
Step 4: Tap “ BT 4.0 Keyboard ” under “MY DEVICES” in the Settings.
For the coming use, you just need to open the keyboard and tablet power, press any key on the keyboard.
Then it will automatically connect. ( No need to click “fn + C” and pair it. Otherwise, it will show not connect.)
I can’t get my Bluetooth connected:
Step 1: Power off the keyboard.
Step 2: Delete all the BT connection records in your iPad setting.
Step 3: Power on the keyboard and connect again. (Repeat the original connection step)
If the above steps do not solve your problem, please contact us via our after-sales email address
([email protected])
Cautions 1:
When the battery is below 20%, BT will be unstable. And it will turn to sleep if you don't press the keyboard
beyond 10 minutes, at this situation, you just need to press any key on the keyboard to wake up the BT get
it to work again. (No need to re-connect)
Cautions 2:
The angle of use is only supported within 135 degrees. If it is more than 135 degrees, the hingle of the keyboard
will burst and cause it to not work properly.
Cau�on
With one year warranty, we will help you solve the problem. Please do not worry. If you have problems with keyboard
usage or improvement suggestions, please do not hesitate to contact us by email (not via Amazon). Thank you!!

Specifica�ons
Operating distance:
Working voltage:
Sleep Current:
Standby Time:
<10 meter
3.0-4. 2v
<60μA
150days
Modulation System:
Working Current:
Charging Current:
Uninterrupted
Working Time:
GFSK
0.7-4mA
7160mA
Charging Time: <2 hours Lithium battery capacity: 270mAh
Lithium battery Life: 3 years
Operating temperature: -10±55 °C
Key life: 5 million strokes
108H(without backlight
2.7H(with backlight)
How to get the keyboard sync with iPad
2
2
1
4
On the setting menu choose BT 4.0
Keyboard, BT signal light go out ,
connection is successful
Please do not unfold the case more than 135 degree angle,
or else the spiale easyto be broken.
WARNING:
Connect instantly
BT 4.0 Keyboard
BT
Power on keyboard,then press
keys,the keybard will stay on searching
state within 3 minutes.
Open your BT signal,keep the BT
showing “on” search state.
Open your iPad, Select
“ setting -universal-bluetooth. ”