PLEASE NOTE
Universal Reprogrammer II+ interfaces have been carefully designed and tested to comply with OBDII protocols.
However some vehicle models are not in full compliance with these protocols for various reasons. In addition the
computer control systems or sensors on any given vehicle may be malfunctioning or out of specification.
While EASE Diagnostics’s testing and the experiences of thousands of Universal Reprogrammer II+ users have
shown the unit to be safe and reliable there is an inherent risk in using any product that may potentially affect the
operation or drive-ability of your vehicle.
If you are concerned about the operation of your vehicle at any time while using Universal Reprogrammer II+:
* Pull off the roadway immediately or as soon as it is safe to do so.
* Disconnect the Universal Reprogrammer II+ from the OBDII port.
* Consult a licensed mechanic or automobile service center.
Please report any issues or concerns to our Technical Support Department at 570-587-7082. We are open Monday
through Friday 9:00 a.m. to 5:30 p.m. Eastern Time. We maintain an active database of the feedback we receive
and your comments can help us continuously improve the product.
COPYRIGHT & TRADEMARKS
Copyright 1999-2015 EASE Diagnostics Inc. All Rights Reserved. MongoosePro CarDAQ ScanDAQ IMclean
IMready and J2534 ToolBox are registered trademarks of EASE Diagnostics Inc. All other trademarks and brand
names are the property of their respective owners.
LIMITED WARRANTY
EASE Diagnostics Inc. guarantees that every Universal Reprogrammer II+ is free from physical defects in material
and workmanship under normal use for one year from the date of purchase.
IN NO EVENT SHALL EASE DIAGNOSTICS INC.'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT. EASE
DIAGNOSTICS SHALL BE EXEMPT FROM ALL OTHER CLAIMS WHETHER BASED UPON DIRECT INDIRECT SPECIAL
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT ITS ACCOMPANYING
SOFTWARE OR ITS DOCUMENTATION. EASE Diagnostics Inc. makes no warranty or representation expressed
implied or statutory with respect to its products or the contents or use of this documentation and all
accompanying software and specifically disclaims its quality performance merchantability or fitness for any
particular purpose. EASE Diagnostics Inc. reserves the right to revise or update its products software or
documentation without obligation to notify any individual or entity. Please direct all inquiries to:
EASE Diagnostics Inc.
187 Commerce Drive
Scott Township PA 18447 USA
FCC Statement
The wireless module has been tested and found to comply with the FCC part 15 and IC RSS-210 rules. These limits
are designed to provide reasonable protection against harmful interference in approved installations. This
equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance
with the instructions may cause harmful interference to radio communications. However there is no guarantee
that interference may not occur in a particular installation. This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2)
this device must accept any interference received including interference that may cause undesired operation.
Modifications or changes to this equipment not expressly approved by the part responsible for compliance may
render void the user’s authority to operate this equipment.
Modular Approval FCC and IC
FCC ID: X3ZBTMOD3
IC: 8828A-MOD3
In accordance with FCC part 15 the SPT2632C1A.AT2 is listed above as a modular transmitter device
