
Once installed, the product cannot be detached. Please strictly follow each
step in the installation manual.
• Please check all parts and components to ensure that there are no damages
or missing items before starting the construction of the product. If you have
any problems or discover any missing parts, please contact customer service
at support@eastoak.com
• Some parts may contain sharp edges. Wear protective gloves if necessary
during assembly.
• When using power tools, please adjust the gear to the minimum, otherwise it
will cause damage to the parts.
• DO NOT assemble this item alone for your safety. Two people are necessary
for smooth and safe installation.
• Item identication: For ease of identication, all parts are labeled to
correspond to the step number in which the part is used.
• Force is required for installation.
• The letter marks on the A/B/C/E panels should face inward when
installing. On panel D, the letter mark is facing outward.
• Check all panels for tightness before usage.
• It is of utmost importance to assemble all parts according to the directions.
Do not skip any step.
• In case of re, do not attempt to extinguish any burning polypropylene with water.
• Wear safety goggles and always follow the manufacturer’s instructions when
using power tools.
• Using a stiff brush or abrasive cleaner could damage the box.
• Hot items such as recently used grills, blowtorches, etc., must not be stored
in the box.
• After rain, wipe the box with cloth before opening.
• Unsuitable for the storage of ammable or corrosive substances.
• Do not stand on the lid.
• To prevent the risk of suffocation, do not allow children to play inside the box.
IMPORTANT CAUTION PARTS LIST
ASSEMBLY INSTRUCTIONS
CARE & SAFETY
Front Panel Back Panel
Side Panel Bottom Panel
Lid Panel Screw
Hydraulic Rod
B (X1)A (X1)
C (X2)
G (X2)
E (X1) F (X8) + Spare(X2)
D (X1)