EAST OAK BRAZI GFT22001-ACCGC User manual

BRAZI Fire Pit Table Series | eastoak.com 1-833-327-8625 | [e-mail]
Glass Wind Guard
of BRAZI Fire Pit
Table Series
GFT22001-ACCGC
GFT22007-ACCGC
[e-mail]
eastoak.com
1-833-EAST-OAK (USA)

BRAZI Fire Pit Table Series | eastoak.com 1-833-327-8625 | [email protected]
BRAZI Fire Pit Table Series
• Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.
• When using power tools, please adjust the gear to the minimum, otherwise it will cause
damage to the parts.
• Not intended for use by children.
• Keep the average of the all-side distances around the re.
• For your safety and to reduce the risk of severe personal injury, the user must read and
understand this Safety Guide.
• Assemble each piece only following the instructions improper assembly and/or use of
tools or hardware not included in the original packing may lead to improper assembly and/
or risk of severe personal injury.
• Please assemble the furniture on a at level surface with a pad/blanket to prevent damage.
• We recommend 2 people to install it together. QUESTIONS/CONCERNS
Your satisfaction is important to us. If you have any questions or concerns regarding the quality
of your re mat, please feel free to let us know and our team will reply within 24 hours.
[e-mail]
eastoak.com
1-833-327-8625 (USA)
IMPORTANT CAUTION
PARTS LIST
A Front glass x2 B Side glass x2 C Bottom bracket x4
D Top bracket x4 E Screw x16
INSTRUCTIONS
1
2
3
CAUTION! DO NOT TOUCH
WHEN THE SURFACE IS HOT!
For windproong, place the assembled
tempered glass shield on the re pit table.
F Bottom Pad x4
A
A
BB
D
Step 2
Step 1
E
A
A
BB
E
F
Step 1 Step 2
C
Install the 4 top brackets (D) in tempered glasses.
Tighten the 4 screws (E) halfway till the glasses
are stable.
Insert the 4 bottom pads (F) to the 4 bottom
brackets (C), then install the brackets to the
tempered glasses. Tighten all screws until
assembly is completed.