EastPoint Belvidere 32103 User manual

ITEM# 1-1-32103
/,/-
oL ,, ,/._.
"F " {'_ t" "_
,, , "' _}_ _. "_' ,_, .wz_ .,_'* ,,,_!' .w_T _,._¢.,
Assern ly
odel
www.eastpoi ntsports.com
TWO OR MORE ADULTS REQUIRED FOR ASSEMBLY

efore you begin
.............. ............
•Please review the parts identifier and make sure that you have all parts before beginning assembly.
•If any questions or issues, please contact us at 1-973-585-4747 BEFORE returning the product to the original place
of purchase.
.Please keep your original sales receipt. Staple it on the adjacent page in the space provided for future reference/use.
It will be required to receive service help or parts under warranty.
CONTACT I
Hours
Monday to Friday
(9:00am to Spm EST)
Technical Support or Replacement Parts
Email us at: c°nsumerservice@eastp°intsp°rts'c°m
Visit us at: www.eastpointsports.com
Call: 973-585-4747
I

UIL G -
ease inspect your play, el
Your Cabinet (Billiard table Playfield) is NOT replaceable. Any damage that exists to your playfield is not
reparable under warranty. If your playfield is damaged, the entire game must be returned to the original
place of purchase for an exchange.
IF ...................... +11
I I
I I
ease attac
= IPT E=
I I
It will be required to receive service help or parts under warranty.
I I
I I
L ...................... d
2

TOOLS
Required
•1 - Phillips Head Screwdriver
(Standard Size) - Not Included ', •Electric Screwdriver or Power Driver
CAUTION - DO NOT OVER TIGHTEN. OverTightening
will result in irreparable damage to the product. If using,
•1-Flat Head Screwdriver please make sure that the tool is set to a very low torque
(Standard Size) - Not Included to prevent damage to the product.
,1 - Wrench - Included •Socket Wrench Set
How to use the:
TSI TI I
Before you begin assembly, please make sure that
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Be sure to work on the assembly on a soft
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage
to the table surface during assembly.
Instructions Parts ID #
(_,_ .". Part Name
-') Part Name""
Item #"
"Step Used In
-Part Image
Part Quantity
TI I
Components
J Support- Bar _'_Leg Panel -Groove J Leg Top
J Leg Base ;_ Corner Brace (_ _Side Cabinet

Components cont.
J End Cabinet _) Ma in Cabinet (_ _Shim - 1mm
(_Shim- 2mm
Pockei Corner (Pre-lnstalled)
l_shim- 3mm _ Pocket Side (Pre-lnstalled)
4

Hardware
_b 8x19mmWasher
©
(Pre-assembledonPart#l)
#32101-68ES
(_ _Allen Key
(_)9_ SurfaceLeveler
(Pre-assembledonPart#68)
_"ZiZZ_
_2_4x 44,5mmScrews
_ _Nut-Hex-8mm
?
_-_ 8x38mmBolt
_7_6,5x50mmAllenKeyBolt
5

Accessories
Chalk Triangle Brush
Billiard Balls Cues
6

ILLI
BEFORE
TA -INSTRUCTIONS
BEFORE BUiLDiNG-
Please inspect your playfield
and layout all your parts
Your Cabinet (Billiard Table playfield)
is NOT replaceable. Any damage that
exists to your playfield is not reparable under
warranty. If your playfield is damaged, the entire
game must be returned to the original place of
purchase for an exchange.
STEP 2
©
Y
)
NOTE: Top
attach merit
blocks and
leg Panel-
Groove
should face
forward
Step 1Assembly
e "O Q
Q Leg Panel-Groove
Q 6.5x35mmAllenKeyBolt r_
Q AllenKey r_
I"I e
QLeo p
QLeoBase
Step 1 Assembly
@ 4x44.5mmScrews F_
Repeat for
all 4 legs.
NOTE:Top
attachment
blocks and leg
Panel- Groove
should face
forward
Repeat for
all 4 legs.

. STEP 3 II Ill tl
Q CornerBrace |
O sidecabinet
O En Cabinet
@ 8x38mmBoR(use16of32)
8x19mmWasher(use16of 56)
@Wrench F_
Repeat for all
four corners.
Do not
overtig hten.
STEP4 }
NOTE," Area cut away in /_ Step 2 Assembly
image to show screw holes _ _.
Step 3 Assembly
II Ill II
Step 2 Assembly
Step 3 Assembly r-_
O 8x38mmBolt
O 8xDmmWasher _T_
O Wrench
NOTE:Area
cut away in
image to show
screw holes
Repeat for all
four corners.
Do not
overtig hten.
8

( ss )
STEP 5A
Assembly for support bar
C,)
Attaching surface
levelers to backside ('_ _
ofpiayfieid. _ _o° l/
.j_-_--___ ._._Step5 Assembly
NOTE: Usingtwo
adultspickupand
flip step4 /5 assemblies. NOTE: Avoidsideways
pressuretolegswhen
flippingover
O "Q e
Q Support Bar |
Q Main Cabinet
Q AllenKey
Q 6.5x S0mmAllen KeyBolt
Assembly 5A
O "L"Bracket-Steel
(Pre-assembledonPart#l)
Q SurfaceLeveler
(Pre-assembledonPart#68)
Q 4x18mmScrews E_
Step 4 Assembly
Step 5 Assembly
Repeat for
both sides of
support bar.
Repeat for
both surface
levelers.
NOTE: Using
twoadultspick
upandflip step4/5
assemblies.
Thencarefully
positionthemain
cabinetinto
position.
NOTE: Avoid
sidewayspressure
tolegs.