Eastwood CONTOUR SCT User manual

CONTOUR SCT RACK
INSTRUCTIONS
Item #33328
• This unit must be securely mounted on a wall, cabinet, workbench etc., capable of holding
30lbs. [13.6kg.] plus pulling stresses from operation. The use of 1/4” screws or appropriately
sized bolts with washers and attachment to a structural member is highly recommended.
• If placing unit on a studded wall, attach to two studs using pre-cut, 15-3/4” spaced holes as
a guide.
• If attaching to a solid concrete or hollow block wall, the use of the proper anchors is required.
• For less secure mounting surfaces, the use of a 1” x 17” x 5” backer board affixed to the wall
is suggested as a mounting surface.
The EASTWOOD CONTOUR SCT RACK has been designed to conveniently hold an SCT and up to six
drums all in one easy to reach location.

© Copyright 2020 Eastwood Automotive Group LLC 8/20 Instruction item #33328Q Rev 1
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: [e-mail]
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
800.343.9353 eastwood.com
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information
provided with this product:
READ INSTRUCTIONS
• Thoroughly read and understand these product instructions before mounting
the Contour SCT Rack.
• Keep these product instructions for future reference.
INJURY HAZARD!
• Check for possible interference with electrical lines, other utilities, or
obstructions before mounting.
• Do not mount in a location where the Contour SCT Rack may become an
obstruction where head or bodily contact could cause injury.
FALLING HAZARD!
• This unit must be securely mounted to prevent falling which can cause
personal injury and property damage.
INJURY HAZARD!
• Ensure Contour SCT is unplugged before storage to prevent accidental
power on which can cause personal injury and property damage.