Easy@Home STS2406 User manual

Model Number STS2406
steam station iron
INSTRUCTION MANUAL
.
Version 1.3
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/20191300 663 907
[e-mail]
AUS

Warranty Note
If you experience any issues with this product or its
performance is not what you had expected, please
contact us at Winplus.
It is likely that we can resolve any problems for you via
phone or email.
We can be reached on:
Phone: [phone] (Mon - Fri; 8:30am - 6:00pm AEST)
Email: customercar[email protected]
Web: www.winplus.com.au
Important
Getting the most out of your Steam Station:
Read the manual carefully
It will help you set up with ease
Visit www.winplus.com.au
We have support materials online
Call After Sales Support - 1300 663 907
Available Monday - Friday, 8:30am - 6:00pm AEST
Email customercar[email protected]
We are always happy to help
.

.
1
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
Welcome
Congratulations on choosing to buy an Easy Home®product.
All products brought to you by Easy Home® are manufactured to
the highest standards of performance and safety, and, as part of our
philosophy of customer service and satisfaction, are backed by our
comprehensive 3 Year Warranty.
We hope that you will enjoy using your purchase for many years to come.

Contents
01 Welcome
03 Warranty Page
04 General Information and Safety Instructions
06 Features/TechnicalSpecications
07 Assembly and Parts List
10 Getting Started
12 Instructions
16 Cleaning and Maintenance
20 FAQ
21 Index
22 Repair & Refurbished Goods or Parts Notice
3
.
.
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period
of 36 months from the date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discretion. The benets
conferred by this warranty are in addition to all rights and remedies in respect of the product
that the consumer has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage.You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
AFTER SALES SUPPORT
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
REGISTER YOUR PURCHASE ATwww.aldi.com.au/en/about-aldi/product-registration/TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
1300 663 907
AUS [e-mail]
STEAM STATION IRON
YEAR WARRANTY
3

.
.
54
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
General Information and
Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY BEFORE USE
• Do not use in dusty conditions
• Do not drop the Steam Station Iron. Dropping or rough use of the unit will cause
damage
• Do not place near strong magnets or strong electric currents
• If the Steam Station Iron is not in use, turn off and unplug from any power source
• Do not attempt to repair, open or alter any components of the Steam Station Iron. In
the case of improper usage or if you have opened, altered and repaired the product
yourself, all guarantees are void
• The supplier does not accept responsibility for additional or consequential damage
other than covered by legal product responsibility
• The supplier is not responsible for the end use of this product including any improper
use or when used for purposes that are not specied
This product complies with AS/NZS60335.1, AS/NZS60335.2.3 and AS/NZS CISPR 14.1
Version No: 1.3
Issue Date: 14 Mar 2019
KEEP FOR FUTURE REFERENCE
Warnings
1. Read all instructions before operating the Steam Station Iron for the rst time.
2. This product is intended for indoor domestic use and is not intended for
commercial, trade or industrial applications.
3. Do not use the appliance for other than intended or specied purposes.
4. Only use the Steam Station Iron with Australian Standard 220-240V AC 50Hz 10A
rated power supply.
5. To avoid electrical shock, do not place the cord, plug or Steam Station Iron in water
or other liquids.
6. Do not operate appliance with wet hands or operate in a wet working environment.
7. Keep the Steam Station Iron and power cable away from heat sources and hot
surfaces.
8. Always protect the power cable from undue exing and wearing – do not allow the
cable to hang off edge of the counter or table.
9. If the supply cord is damaged, do not use the product. Contact customer service for
repair or replacement to avoid a hazard.
10. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
11. Do not leave your Steam Station Iron unattended when power is connected.
12. Do not use this appliance with an external timer or separate remote-control system
of any kind.
13. Do not ll the container above its maximum indicated level.
14. Take caution of hot surfaces when product is in use.
15. Do not direct steam from the iron towards any persons, animals, or combustible
items.
16. Do not leave hot iron soleplate in contact with any material whilst unattended.
17. The plug must be removed from the power point before the water tank is lled with
water.
18. The iron must be used and rested on a at, stable surface.
19. When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
20. The iron is not to be used if it has been dropped, if there are visible signs of damage
or if it is leaking.
21. Children should be supervised to ensure that they do not play with the appliance.

.
.
76
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
• 6 Bar Steam Pressure
• 3 Steam Settings
• 1.7L Removable Water Tank
• Boil Dry Protection
• Automatic Shut Off After 10 Minutes
• Cord Storage
• LED Control Panel
• Non Slip Handle
• Iron Locking Mechanism
• Ceramic Soleplate
• Water Level Sensor
• 2-4min Heat Up Time*
• Automatic Descale Function
• 120g/min Max Steam Delivery
Model Specication: STS2406
Input: 220-240V AC 50Hz
Power: 2000-2400W
(Iron Power: 1000W;
Boiler Power: 1400W)
Tank Capacity: 1.7L
Maximum Continuous Steam Rate:
120g/min
Weight: 4.72kg
Warranty: 3 Years
Dimensions: 39cm x 22cm x 31cm
Features
Technical Specications
WARNING: Burn Hazard. Do NOT touch. Allow to cool before servicing Assembly and Parts List
1. Removable Water Tank
2. Tank Handle
3. Tank Lid
4. Iron Release Button
5. Iron
6. Steam Button
7. Iron Temperature Dial
8. Iron Rest
9. Steam Hose
10. Iron Thermostat Light
11. Main Housing
12. Control Panel
13. Cord Tidy
13
12
4
2
1
3
98765
11
10
*Heat up time dependent upon water temperature

.
.
98
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
1
44
3
5
6
Control Panel
1. ON Indicator
2. Descale Indicator
3. Low Water Level Indicator
4. Steam Setting Buttons
5. ON/OFF Button
6. LOW-MEDIUM-HIGH Steam Setting Indicators
2
13
4
2
Iron Temperature Dial
1. Max Setting (For Linen)
2. High Setting (For Cotton)
3. Medium Setting (For Wool)
4. Low Setting (Fibres/Silk)
Soleplate Temperature Settings
The following table should be used as a guide only, always refer to garment
manufacturer guidelines for each individual garment.
Setting Fabric Steam Temperature*
•Synthetic fibres/silk NO 70°C - 120°C
• • Wool YES 100°C - 160°C
• • • Cotton YES 140°C - 210°C
MAX Linen YES 170°C - 225°C
*NOTE: These temperatures are approximate and for your reference only.

.
.
1110
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
The Steam Station Iron is designed to be used with normal, room temperature tap
water only. In hard water areas it is recommended to use distilled water as minerals
or other elements may cause wear to the appliance and staining to clothes.
Remove any packaging material and promotional labels before using your Steam
Station Iron for the first time. You may notice an odour from the unit on first use.
This is normal and will cease after a short while.
Before First Use
Water Use
The Steam Station Iron has a locking mechanism for the iron which keeps the iron
safely in place and allows easy transport. To release, press the iron release button
and rotate the iron clockwise off the iron rest.
Iron Locking Mechanism
Getting Started
WARNING: Do not use the following in the water tank: rain water, bottled water,
detergents, descaling agents or any other chemicals.
WARNING: Take care of the hot soleplate when releasing the iron, this poses risk of burns.
NOTE: Before releasing the iron, ensure the base is on a flat, stable surface.
If the water is low, the low water level indicator light will illuminate. At this point the
iron can generate little to no steam. To refill the tank during use, detach the water
tank (the unit will beep) and refill with water. Slide the tank back into position and
wait for the boiler to reheat.
The Steam Station Iron has a safety auto-off function which turns the unit off
automatically after 10 minutes of non-use. If you need to turn the unit back on,
simply press the ON/OFF button and follow instructions as per page 13.
Your Steam Station Iron is equipped with boil dry protection, meaning if there is
no water in the water tank or no water running through the boiler, the unit will beep
and the heating element for the boiler will shut off. Please note however that this
does not affect the iron soleplate and therefore it will still be hot.
The Steam Station Iron has a descale notification function to assist in notifying
when the boiler should be flushed. Mineral deposits can build up in the appliance
potentially blocking steam holes and affecting overall performance. When the
descale indicator light illuminates it means the boiler should be cleaned. Follow
cleaning instructions listed on page 17.
Water Level
Auto-Off Function
Boil Dry Protection
Descale Indicator
WARNING: Do not fill the water tank above the MAX line.

.
.
1312
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
Lift the lid and fill the tank with
water under a tap or using a jug,
ensuring you do not exceed the
MAX fill line.
Remove the water tank by
pressing the button on the handle
and pulling the tank out.
NOTE: Water should be at room temperature. Dry any excess water from around the
outside of the water tank.
2.1.
Slide the tank back into position.
Gently pull the handle to ensure
the tank is correctly in place.
3.
Position the Steam Station Iron on a firm level table, bench or ironing board.
Filling the Water Tank
Instructions
Press the ON/OFF button, the unit
will beep once.
Plug the unit into a household
power point and turn power point
ON.
The ON/OFF light will illuminate
and the (steam setting 1) icon will
begin flashing as default, indicating
the boiler is heating. The iron
thermostat light will also turn ON.
Select the desired steam setting
by pressing either the right or left
arrows. The corresponding light
will flash to indicate the boiler is
heating to the selected setting.
NOTE: The unit may make a pumping noise for a few seconds, this is normal.
2.1.
3. 4.
Steam Station Iron Operation

.
.
1514
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
Once the selected steam setting
light has stopped flashing and the
iron thermostat light is OFF, the unit
is ready for use.
Select the desired soleplate
heat setting by rotating the iron
temperature dial.
Press the iron release button and
rotate the iron clockwise to release
from the locking mechanism.
Direct a short burst of steam in the
air to release any condensation.
NOTE: Always refer to garment manufacturer recommendations for the correct
temperature setting.
NOTE: During heating the iron may emit a small amount of steam for a few
seconds, this is normal. The thermostat light and steam setting light may
illuminate or flash at times during use.
NOTE: Particles may come out of the soleplate when you use the iron for the
first time. This is normal; the particles are harmless and stop coming out of the
iron after a short while.
6.5.
7. 8.
WARNING: Take care not to touch the hot soleplate when releasing the iron,
contact could result in burns.
WARNING: Do not direct steam from the iron towards any persons, animals or
combustable items.
To iron without steam do not press the steam button.
TIP: You can provide a quick shot of steam at any time during ironing by pressing and
releasing the steam button as desired.
Once you have nished ironing, turn the unit OFF by pressing and holding the ON/
OFF button and removing the plug from the power point.
To iron with steam, press the
steam button and release as
desired.
9.
10.
WARNING: Before storing, ensure the Steam Station Iron has completely cooled down.
This may take up to 2 hours.
WARNING: Never leave iron face down on any surface. Always place iron back on the
main unit or stand the iron vertically in between ironing strokes.
11.

.
.
1716
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
Cleaning and Storage
Before cleaning the Steam Station Iron, ensure the unit is turned OFF and unplugged from
the power point. If recently used, allow time for the iron to cool down completely. This
may take up to 2 hours.
Clean the base, iron and soleplate by wiping with a moist cloth.
When storing the Steam Station Iron, ensure the following steps are taken.
1. Turn OFF the appliance and unplug from the power point.
2. Empty the water tank.
3. Allow the iron to cool completely
before storing. Wrap the cord and
steam hose around the base to
store neatly
Disposal
At the end of its working life, do not
throw this product out with your
household rubbish. Electrical and
electronic products contain substances
that can have a detrimental effect on
the environment and human health if
disposed of inappropriately. Observe any local regulations regarding the disposal of
electrical consumer goods and dispose of it appropriately for recycling. Contact your local
authorities for advice on recycling facilities in your area.
Please keep the original packaging carton and materials in a safe place. It will help to
prevent any damage if the product needs to be transported in the future. In the event it is
to be disposed of, please recycle all packaging material where possible.
If you require another copy of this instruction manual, please contact
customercar[email protected] to obtain an electronic copy.
WARNING: DO NOT immerse the main unit or iron in water or any other liquid.
NOTE: Do not use abrasive cleaning materials or chemicals as this can damage the
appliance and soleplate.
Cleaning and Maintenance Descaling the Steam Station Iron
When the descale indicator is illuminated, the boiler needs to be flushed out to maintain
optimum performance of the appliance. Before proceeding, ensure you have unplugged
the appliance from the power point and removed the water tank.
Descaling or decalcifying solutions can be readily purchased to perform cleaning. If using
these solutions, follow manufacturer instructions carefully as any misuse may cause
damage to the appliance. Always ensure the solution is specifically designed for the
purpose of descaling irons or Steam Station Irons.
How to Clean
1. Turn OFF unit and unplug from power point. Allow unit to cool completely.
2. Position the unit on a sink edge or similar waterproof surface.
3. Tilt the unit on its side to expose the base.
NOTE: For convenience it is recommended to detach the water tank and iron.
WARNING: Do not use any other solutions in the water tank as this may cause damage
to the appliance.
WARNING: If Steam Station Iron has been recently used, ensure the appliance has
cooled completely before proceeding with descaling process to reduce risk of burns.
Needle Plate
Screw Driver Boiler Seal

.
.
1918
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
4. Locate the Needle Plate Screw Driver on the base of the Steam Station.
5. Flip back the boiler seal and using the Needle Plate Screw Driver attached, release
the boiler cap.
NOTE: The boiler cap may be tight due to prolonged steam exposure, if problems persist
in removing, please contact customer service.
6. Tilt the unit over the sink to ush out any liquid inside.
7. Rinse out boiler with 1 cup of water. Drain and repeat.
8. Ensure once complete the boiler cap and seal are in place.
Vinegar Solution
An alternative method to descale the Steam Station Iron is to use a vinegar solution to
flush out the appliance.
1. Follow instructions under ‘How to Clean’ up to step 5.
2. Mix 125mL of water with 125mL of distilled white vinegar.
3. Tilt the unit upwards and pour the 1 cup solution into the boiler.
4. Replace the boiler cap.
5. Place the unit in an upright position again and leave to stand for 2 minutes.
6. Shake the unit to mix the solution around then leave to stand for another 5-10
minutes.
7. Tilt the unit back onto its side and unscrew the boiler cap once more.
8. Empty the boiler of the solution.
9. Rinse with one cup of water, shake around and empty. Repeat 2-3 times for a
complete ush.
10. Ensure once complete the boiler cap and seal are in place.
Hints and Tips
• Always check your garment/fabric for an attached care label with ironing instructions.
Follow these ironing instructions to avoid damage to the fabric.
• It is recommended to iron fabrics that require a lower heat rst as the iron takes longer
to cool down from higher settings.
• If the fabric consists of various kinds of bres, it is highly recommended to select the
lowest ironing temperature to suit the composition of those bres.
• Silk should be ironed on the inner (non-shiny) side. Velvet and other textures should
be ironed in one direction with light pressure applied. Always keep the iron moving
whilst ironing to prevent burns to delicate fabrics.
• Pure wool fabrics (100% wool) may be ironed. It is recommended to iron the inside of
the fabric.
• If ironing a t-shirt or garment with printed graphics ensure you turn it inside out and
iron the reverse side.
• Never iron over zips or metal buttons in the cloth, as this may damage the non-stick
coating on the soleplate.
• Vertical steaming is an alternative way to smooth out creases in garments or curtains.
The high steam pressure of the Steam Station Iron can provide bursts of steam while
holding the iron vertically. For best results, utilise on delicate or light fabrics. To
produce the maximum amount of steam, set the steam setting to HIGH. Only direct
steam at hanging garments or curtains in a safe area and ensure you always refer to
garment manufacturer recommendations.
WARNING: Do not direct steam from the iron towards any persons, animals, or
combustible items, serious burns could occur if you do.

.
.
2120
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
After Sales Support
MODEL: STS2406 PRODUCT CODE: 10170 07/2019
[e-mail]
1300 663 907
AUS
FAQ
Problem Solution
My Steam Station Iron
doesn’t turn ON
• Ensure the unit is plugged correctly into a power
point that is turned ON.
• Ensure you have pressed the ON/OFF button.
• If there has been no water in the water tank or boiler
the boil dry protection may have engaged. Refer to
page 11.
The iron is dripping
water
• Ensure you allow the boiler and iron to fully heat.
• The Iron can drip water when you try and use the
steam function on the lowest heat setting. It is
recommended to use the steam function on higher
heat settings.
The descale light is on • The appliance requires descaling, follow instructions
for cleaning on page 17.
The iron isn’t hot • Ensure the unit is plugged correctly into a power
point that is turned ON.
• Ensure you have pressed the ON/OFF button.
• If there has been no water in the water tank or boiler
the boil dry protection may have engaged. Refer to
page 11.
• Check the iron temperature dial is correctly set to
desired heat.
There is no steam • Ensure the low water icon is not illuminated. When
the water level is low, steam may not be produced.
• Ensure you are pressing the steam button on the iron.
The low water level
icon is on
• The water needs to be relled, follow instructions on
page 12.
There is a pumping noise • The pump will engage at times to ensure sufcient
steam is generated, this is normal.
Index
Assembly and Parts List
Boil Dry Protection
Boiler Seal
Control Panel
Descale
Fabric
FAQ
Features
Getting Started
Iron Temperature Dial
Iron Thermostat Light
Locking Mechanism
Soleplate
Steam Hose
Steam Station Iron
Technical Specification
Vertical Steaming
Warnings
Warranty Page
Water Level
Water Tank
Welcome
7
6, 11, 20
17, 18
7, 8
6, 8, 11, 17, 18, 20
9, 19
20
6
10
7, 14, 20
7, 13, 14
6, 10, 14
5, 6, 9, 10, 11, 14, 16, 19
7, 16
4, 5, 10, 11, 12, 13, 15, 16, 17, 18, 19, 20, 24
6
16
5
2
6, 8, 11, 20
6, 7, 10, 11, 12, 16, 17, 20
1

.
Repair and Refurbished Goods
or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned
to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such asles
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs
stored on a portable media player, games saved on a games console or les stored on a USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on1300 663 907 or write to us at:
Winplus Australasia
PO Box 537 Bayswater Business Centre, Victoria, Australia
1300 663 907 - Hours: Mon-Fri 8:30am - 6:00pm AEST
[e-mail]
AFTER SALES SUPPORT
1300 663 907
AUS [e-mail] YEAR WARRANTY
3
STEAM STATION IRON
MODEL: STS2406 PRODUCT CODE: 10170 07/2019

LAUNDRY