Easydive Leo3 User manual

![email protected] - [phone] | [phone] !
Right Hand Control!
1. Autofocus (Exposure Reading) and Shutter Release Mode. To change the shooting
mode, hold down Button 1 until the Red LED is switched on (15 sec.).
2. Photo Shoot:
!Mode 1: When you press the button you have the autofocus, when you release the
!!button you will have the shoot (Default Setting).
! !!!
!
Aperture - Priority (Av):
4. Aperture -
5. Aperture +
6. EV -
7. EV +
Shutter - Priority (Tv):
4. EV -
5. EV +
6. Shutter Speed -
Manual Mode (M):
4. Aperture -
5. Aperture +
6. Shutter Speed -
10. On / Offelectronic board (to switch on press once, to switch offhold down about
3 seconds until the board is switched off). The camera will go in Standby limiting the
power consumption. To activate the Camera, after switch on the electronic card,
press the Button 2.
!
!
Hand Control - Right
Front Back
Mode 2: When you press the button first you have the autofocus and then the
shoot. (If the lens is already in focus you will have the direct shoot).
7. Shutter Speed +
7. Shutter Speed +
8. ISO +
9. ISO -
Easydive -Via dell’Industria 13 int 6, 48015 Cervia (RA) -Italy
3. Change Mode (M/Av/Tv/P). Inser t the Camera in Mode M.
GFX100S
Press the buttons 4,5,6,7,8,9 once to change by one step. Keep
pressed to quickly change the chosen parameter.

![email protected] - [phone] | [phone] !
Left Hand Control!
!
!
Hand Control - Left
Back Front
Easydive -Via dell’Industria 13 int 6, 48015 Cervia (RA) -Italy
10. On /Offelectronic board (to switch on press once, to switch offhold down about
3seconds until the board is switched off). The camera will go in Standby limiting the
power consumption. To activate the Camera, after switch on the electronic card,
press the Button 2.
9. No associated function.
8. No associated function.
7. Metering Mode.
6. No associated function.
5. Mode Area AF.
4. Autofocus Mode (AF-S /AF-C /M)
3. Change Format 4/3 or 16/9.
1. Autofocus (Exposure Reading) and Shutter Release Mode. To change the shooting mode,
hold down Button 1 until the Red LED is switched on (15 sec.).
2. Photo Shoot:
Mode 1: When you press the button you have the autofocus, when you release the
button you will have the shoot (Default Setting).
Mode 2: When you press the button first you have the autofocus and then the !
shoot. (If the lens is already in focus you will have the direct shoot).
GFX100S