Easylife EL6291 User manual

4-in-1 Solar Bird Hotel
INSTRUCTION MANUAL
Model No. EL6291 Bronze / EL6293 Green
Please read carefully before use and keep for future reference
Imported and distributed by Easylife Group Ltd, London NW1 0JP
Support Line: 0333 030 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
EL6291/EL6293-1 © 2018 Easylife Group Ltd Support Line: 0333 030 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
everyday solutions
™
Est. 1992
USING YOUR 4-IN-1 BIRD HOTEL
Your 4-in-1 Bird Hotel comes with a rechargeable battery installed, this is charged by the solar panel for
maintenance free long term use without having the cost of using standard non-rechargeable batteries.
To protect the battery during delivery it has been isolated, so before use the isolation tab needs to be
removed.
1. Take the Solar Light (A) from the Bird Hotel and whist holding the main body of the light twist the top
anti-clockwise to unlock. The solar panel top is connected to the main body by two wires so care
should be taken when lifting off the top once unlocked.
2. With the solar panel top lifted off the battery compartment is now visible, the battery will be in place
but a small tab will be between the battery and one of the terminals. Remove this tab so that the
battery now makes contact with the terminal.
3. In the battery compartment there is also an On/Off Switch, put this in the On position if it isn’t
already.
4. Replace the solar panel on to the top of the light unit, turning clockwise to lock in place.
The Solar Light (A) can now be replaced in the top of the 4-in1 Bird Hotel. We recommend that on rst
use the solar light is given a full days charge in direct sunlight, please note that it will take several cycles
of daytime charge and night time use for the rechargeable battery to be conditioned and give the best
possible duration of the lamp at night.
Also please be aware that the charging of the battery, and therefore the length of time the lamp works
through the night, is directly relative to the sunlight that it receives during the day. So for optimum
performance the 4-in-1 Bird Hotel should be positioned where it can collect the greatest amount of full
sunlight. On overcast days, if the Bird Hotel is positioned in a shady area or during the winter months
when there is less daylight hours the lamp will operate for a shorter time in the evening.
DISPOSAL
• Please respect the environment!
• Dispose of the packaging according to the local recycling regulations.
• Dispose of the appliance at the end of its life span according to environmental considerations.
WARNING
This product is intended for domestic use only.
TECHNICAL SPECIFICATION
Battery: 1 x Ni-MH AA 600mAH 1.2V rechargeable battery (included). Measures: H95xDia.44cm.
everyday solutions
™
Est. 1992
CREATE A
PEACEFUL
BIRD
SANCTUARY
IN YOUR
GARDEN

Support Line: 0333 030 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the 4-in-1 Solar Bird Hotel.
Create a peaceful bird sanctuary in your garden all year round. Attract birds into your
garden with the 4-in-1 Solar Bird Hotel, home to a bird bath, bird feeder, planter and solar
light. Charging with the sun’s energy during the day, it automatically turns on at dusk and
off at dawn, lighting its lifetime LED for up to 8 hours. Planting your favourite owers can
make the hotel even more inviting, bringing bird life to your garden throughout the year.
Measuring just over a metre tall and half metre wide, it’s made from durable all-weather
rust-proof resin to look good season after season. Easy to install, with no batteries or
electricity required.
PARTS
Please read the assembly instructions carefully before assembling the item. Make sure all the parts
listed below are present.
A. Solar Light x1
B. Roof x1
C. Screws x11
D. Brace x1
E. Pool x1
F. Connector x1
G. Barrier x4
H. Basin x1
I. Upper Pole x1
J. Lower Pole x1
K. Base x1
L. Dish x1
M. Tripod x1
O. Large Screw x1
P. Bolt & Washer x1
R. Small Basin x1
ASSEMBLY INSTRUCTIONS
1. Screw the lower pole (J) into the base (K). Then put the small basin (R) onto the top of the
lower pole and screw the upper pole (I) in to the lower pole (J) to make it tightly connected.
2. Use the connector (F) to connect the inside of basin (H) with the large screw (O).
3. Insert the barriers (G) into the inside pool (E), with the rails towards part (E),
use screws (C) to x them on the underside.
4. Connect the barriers (G) and the brace (D) with the screws (C).
5. Put brace (D) all the way in to roof (B) and twist to lock together in the snap connectors.
6. Use the bolt and washer (P) to connect to the tripod (M) with the connector (F).
7. Attach tripod (M) to the underside of pool (E) with screws (C).
8. Connect the upper pole (I) and the basin (H) and twist to lock in place.
9. Insert the dish (L) into the pool (E).
10. Insert the solar light (A) into the roof (B).
everyday solutions
™
Est. 1992