Easylife EL6957 User manual

Star Shower - Magic Motion
INSTRUCTION MANUAL
Model No. EL6957
Please read carefully before use and keep for future reference
Imported and distributed by Easylife Group Ltd, London NW1 0JP
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN6957 © 2017 Easylife Group Ltd
everyday solutions
™
Est. 1992
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
everyday solutions
™
Est. 1992
PANTONE 072 C
PANTONE 123 C
WARNING
This product is intended for domestic use only.
Ensure you have read all instructions before use.
TROUBLE SHOOTING
Issue Solution
Does not light up It may take some time to warm up, especially in
cold weather
Remote control is not working Check that the battery has been inserted correctly
Head will not stay in place Ensure the screw is tight enough
TECHNICAL SPECIFICATION
Laser classication: Class II
Wavelength: 532nm, 650nm
Cable length: 10M
Measurements:
• When used with the ground stake 40x10x15cm
• When used with round base 20x14x17cm
Input : DC 5V 1.0A
Remote Control: 1x CR2025 battery (Included) 8.5x4x0.7cm
IP44

IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always be practiced
including the following:
1. Read and follow all safety instructions.
2. Read and follow all instructions that are on the product or provided with the product.
3. We have provided a 10m cable in order to easily plug in, in the house or garage in order
to keep it the plug dry. Please do not plug in externally.
4. This unit is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the unit
5. For a direct plug-in power unit, do not install or use within 10 feet of a body of water such
as a swimming pool.
6. For a direct plug-in unit, do not use in a bathroom.
7. Don’t operate unit with damaged plug.
8. Don’t disassemble charger. Disassembly may result in electric shock.
9. To reduce the risk of electric shock, unplug the charger from the outlet when not in use.
10. Don’t operate unit if it has been subjected to damage in any way.
SAVE THESE INSTRUCTIONS - This manual contains important safety and operating
instructions for power units.
COMPONENTS
PANTONE 072 C
PANTONE 123 C
everyday solutions
™
Est. 1992
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Laser light projector with cable Flat base and ground stake UK adapter Remote
Thank you for purchasing the Star Shower Light.
Dear Customer
Please read all instructions
prior to use and save
instructions for reference.
CAUTION:
Do not use Star Shower Motion in
any manner other than that intended
by manufacturer to avoid exposure
to hazardous laser radiation. Do not
intentionally shine into eyes or face.
Do not attempt to open the housing
of Star Shower Motion under any
circumstance.
NOTICE:
Ensure all light beams are projected
onto a hard surface to minimize
the risk of interfering with or
endangering aircraft
Please note:
Star Shower light is intended to
operate in temperatures from
-20°C to +35 °C. At or below freezing
temperature, Star Shower light may take
up to 10 minutes to 20 minutes to warm
up and reach its full projection strength.

PANTONE 072 C
PANTONE 123 C
everyday solutions
™
Est. 1992
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
The laser light can be used outdoors and indoors.
Instruction for Outdoor use
1. Remove all parts from packaging and check if all the parts are included and not damaged.
2. Connect the adaptor to the cable and make sure the metal wires align with the holes. Push it in
until rmly in place then screw the cable’s plastic sleeve onto the plug.
3. Attach the ground stake to the light. Do not use force as this can damage the product.
4. Determine a location for the laser light that is free from visual obstructions between Star
Shower Motion and your intended surface so the laser lights project clearly.
Distance to
Surface
Coverage
10ft
20ft
25ft
30ft
35ft
206 sq ft.
824 sq ft.
1288 sq ft.
1854 sq ft.
2524 sq ft.
5. Loosen the thumbscrew and adjust the angle of the Star Shower lights housing so it is pointing
at your intended surface. Tighten the thumbscrew to hold angle.

PANTONE 072 C
PANTONE 123 C
everyday solutions
™
Est. 1992
Support Line: 0303 031 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
Instruction for indoor use
1. Remove all parts from packaging and check if all the parts are included and not damaged.
2. Connect the adaptor to the cable and make sure the metal wires align with the holes. Push it in
until rmly in place then screw the cable’s plastic sleeve onto the plug.
3. Attach light to the round base. Do not use excessive force or you risk damaging the light.
4. Ensure Star Shower Motion is placed on a steady, level surface.
5. Loosen the thumbscrew and adjust the angle of the Star Shower light housing so it is pointing at
your intended surface. Tighten the thumbscrew to hold angle.
Operation:
When the laser light is on, DO NOT STARE INTO THE BEAM
Star Shower light is intended to operate in temperatures from
-4°F to 95°F (-20°C to 35°C). At or below freezing temperature,
Star Shower light may take up to 10 minutes to 20 minutes to
warm up and reach its full projection strength.
On/Off on the Light:
The on/off switch is found at back of the unit (g. 1). Press the
button to switch on, then repeatedly press the button to cycle
through modes and switch off.
Remote Control:
Working Distance: You can work the remote control from a
distance of 15-20M depending on surroundings and weather
conditions.
• Comes with a CR2052 battery already inserted. Please pull
out the plastic insulator before use.
• Red button - On/Off
• Colour Button - Change colour
• Flash Button - Change ashing mode
• Timer -Choose how long you would like the lights to stay on
and press the appropriate option. The lights will automatically
turn off after this time.
• Cancel -If you no longer want the lights to stay on for how
long you originally chose, simply press cancel and the lights will
stay on until you turn the off using the on/off button.
Battery replacement:
To replace the battery, simply push the squeeze the
battery compartment between your ngers and pull
open. Replace the battery, ensuring correct polarity is
used and reinsert the battery compartment back into the
remote control.
Fig. 1
On/Off
Change Colour
Change Flash
Mode
Auto Off Timer
Cancel Timer
Tap the On/Off button to cycle through nine mode settings
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Spinning red and green colour
Spinning red colour
Spinning green colour
Spinning red and green slow pulse
Spinning red and green medium pulse
Spinning red and green fast pulse
Static red and green colour
Static red colour
Static green colour