EasyN F2 series User manual

MF2E-E -B 2
- 2 -
FORWORD
This series product is integrated webcam focusing on network video
monitoring, including wired box IP camera, wireless box IP camera, wired
IR dome camera, wired waterproof IR IP camera, etc. The media processor
of camera uses high-ability chip to realize audio/video capture,
compression and transmission, the standard Motion-JPEG coding algorithm
can confirm the clear and smooth effect of video transmission. The camera
supports user remote-real-time monitoring through super client software,
system client platform and IE browser, etc.
This series IP camera can be used for remote monitoring locations, such
as enterprises, chain stores, factories and homes, etc. It is simple
pick-up and easy operation.
Please confirm the items to be complete, if there is lost, please contact seller
timely.
ITEMS LIST:
IP camera
--------------------------------------------
1piece
Bracket （ referring to model ） ---------------------- 1piece
Power adapter
---------------------------------------
1piece
Certificate ------------------------------------------- 1piece
CD ---------------------------------------------------- 1piece
Warranty card
-----------------------------------------
1piece
Instruction:
IP Camera referred is network camera; PC is personal computer; single
click means mouse left click; double click means mouse twice left click.
For IP Camera factory settings:
Administrator user: admin; password: no password
LAN IP address: 192.168.1.126; http port: 81
Statement:
T he current device may have different version with the sample in this
manual, if u can not set up device referring to this manual, please contact
provider.
T he content will update from time to time, the manufacturer reserves the
right without notice.

MF2E-E -B 2
- 3 -
1. PRODUCT OVERVIEW .......................................................................................................... - 3 -
2. PRODUCT FEATURE ............................................................................................................. - 0 -
3. DEVICE APPEARANCE AND INTERFACE ......................................................................... - 1 -
3.1 . DEVICE APPEARANCE .................................................................................................. - 1 -
3.2 . DEVICE INTERFACE .................................................................................................... - 1 -
4. NETWORK CONNECTION ................................................................................................... - 2 -
4.1 . CONNECTION INSTRUCTION ......................................................................................... - 2 -
4.2 . ACCESS INSTRUCTION ................................................................................................. - 2 -
4.3 . CONNECT NETWORK VIA ADSL ..................................................................................... - 3 -
4.4 . CONNECT NETWORK VIA ROUTER ................................................................................. - 4 -
5. SOFTWARE OPERATION ...................................................................................................... - 4 -
5.1 . IPcamera TOOL .......................................................................................................... - 4 -
5.2 . LOGIN IP CAMERA ...................................................................................................... - 5 -
5.3 . USER OPERATION ........................................................................................................ - 7 -
5.4 . MULTIDEVICE CONFIGURATION ................................................................................... - 8 -
5.5 . NETWORK CONFIGURATION ........................................................................................... - 9 -
5.6 . DDNS SETTINGS ......................................................................................................... - 11 -
5.7 . EMAIL SERVICE SETTINGS ....................................................................................... - 12 -
5.8 . MOTION DETECTION .................................................................................................. - 13 -
6. System Requirements ............................................................................................................. - 14 -
6.1. IPCAM Requirements ............................................................................................... - 14 -
6.2. Host System Requirements ................................................................................... - 14 -
6.3. Login System .......................................................................................................... - 14 -
6.4. Forwarding Service Configuration Guide ....................................................... - 15 -
6.5. Automatic Configuration Guide ......................................................................... - 15 -
6.7. LiveView .................................................................................................................. - 17 -
6.8. PlayBack .................................................................................................................. - 20 -
6.9. IP Search ................................................................................................................ - 20 -
6.10. system .................................................................................................................... - 23 -
6.11. Style ...................................................................................................................... - 25 -
6.12. IPCAM Table .......................................................................................................... - 36 -
6.13. Camera Setting .................................................................................................... - 37 -
6.14. PTZ Settting ........................................................................................................ - 51 -
6.15. Language ................................................................................................................ - 51 -
6.16. Motion Detection ................................................................................................. - 52 -
6.17. Record .................................................................................................................... - 55 -
6.18. Playback ................................................................................................................ - 57 -
6.18.1. Local Storage Interface: .................................................................................. - 57 -
6.18.2. Remote Playback Interface: ............................................................................ - 58 -
7. PORT FORWARDING ........................................................................................................... - 60 -
8. APPENDIX ............................................................................................................................. - 61 -
8.1. FAMILIAR PROBLEM .................................................................................................. - 61 -

MF2E-E -B 2
- 4 -
8.2. WARRANTY .................................................................................................................. - 62 -
8.3. WARRANTY CARD ........................................................................................................ - 63 -
1.
1.
1.
1. PRODUCT
PRODUCT
PRODUCT
PRODUCT OVERVIEW
OVERVIEW
OVERVIEW
OVERVIEW
IP Camera integrates network function and web service function, it can
send video record to anywhere through internet, and we can view real-time
video of site via web browser. And it is suitable for many locations,
such as large stores, schools, factories and homes, etc.
IPCAM basic function of remote video data transmission is basis on MJPEG
hardware compressive technology, the maximum speed of high-quality
image transmission in LAN/WAN can reach 25fps.
IPCAM video data transmission is based on TCP/IP protocol, and it has
built-in Web server to support Internet Explorer, hence, it is more
convenient to manage and maintain device, to remote configure some
options, to update versions.
Please check the product if the items are complete before set-up, if there is
some lost, please contact seller.

MF2E-E -B 2
- 5 -
2.
2.
2.
2. PRODUCT
PRODUCT
PRODUCT
PRODUCT FEATURE
FEATURE
FEATURE
FEATURE
● powerful high-speed processor of video protocol
● high sensitiv ity and definition CMOS sensor
● 0.3 megapixels
● IR night version
● Optimized Motion-JPEG video compression algorithms to achieve narrow
bandwidth high-definition image transmission
● multilevel users and password management
● support many browsers （ IE browser ， Firefox browser ， Google browser,
etc. ）
● support wireless network(Wi-Fi/802.11/b/g)
● support dynamic DNS (DDNS)
● support maximum 32G SD card storage ， for alarm snapshot and record
● support motion detection
● support two-way audio monitoring
● support snapshot
● support mobile phone view
● support log
● support multiprotocol :HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP

MF2E-E -B 2
- 6 -
S ystem
feature
S ystem
security
T hree levels account ， password ， multi-authority
management
O wn dynamic IP
domain name
system （ free ）
B uilt-in independent R&D DDNS system, lifetime
free proprietary ddns, no need to apply DynDns,
no worry about frequent offline problem, quickly
connection . For example , http://demo. easyn.hk,
the serial number is "demo"
M obile phone
platform （ free ）
N o need to install software, support IE multi-view,
management, phone message on alarm, alarm picture
storage functions.
S uperiority
S upport computer monitoring, support many smart
phone in market, such as Iphone, android , Symbian,
etc.
M obile phone
view
S upport Iphone 、 Windows Mobile 、 Symbian 、 Android
direct view.
L ocal storage S upport maximum 32G SD card memory
K ernel
OS E mbedded Linux OS
Micro
processor
32Bit RSIC Embedded Processor
V ideo
C ompression Motion-JPEG-N
S ignal system CMOS 0.3 megapixels
F rame rate 25fps
R esolution VGA(640*480),QVGA(320*240) QQVGA （ 160*120 ）
I mage
adjustment
B rightness, contrast, can be adjusted
W hite balance,
BLC
A uto white balance and BLC
N etwork
I nterface RJ-45 10/100Mb auto-adjusted internet interface
P rotocol S upport TCP/IP , HTTP , ICMP , DHCP , FTP , SMTP , PPPoE ,etc
Wi-Fi WIFI,802.11 b/g/n
O nline user S upport 15 users direct connection
S upport IP S tatic IP, dynamic IP, PPPOE
A larm
I nput/output 1/1
A larm
detection
M otion detection, sensitivity configuration
A larm notice
S upport to upload pictures via Email, FTP and call
preset position, and control by GPIO signal, etc.
C ertificate C ertification ISO FCC CE SASO RoHS

MF2E-E -B 2
- 7 -
3.
3.
3.
3. DEVICE
DEVICE
DEVICE
DEVICE APPEARANCE
APPEARANCE
APPEARANCE
APPEARANCE AND
AND
AND
AND INTERFACE
INTERFACE
INTERFACE
INTERFACE
3.1 . DEVICE APPEARANCE
Picture
Picture
Picture
Picture 1-
1-
1-
1- device
device
device
device appearance
appearance
appearance
appearance
3.2 . DEVICE INTERFACE
Picture
Picture
Picture
Picture 2-
2-
2-
2- device
device
device
device interface
interface
interface
interface
P
P
P
P ower:
ower:
ower:
ower: connect to external power adapter, standard: DC 5V/2A
RJ
RJ
RJ
RJ 45:
45:
45:
45: network interface standard: 10/100M auto -adjusted internet interface, it can connect
many kinds of devices, such as hub , router, and switch, etc.
N
N
N
N etwork
etwork
etwork
etwork lens:
lens:
lens:
lens: lens flickers when network connecting
P ower lens: lens on when power on

MF2E-E -B 2
- 8 -
SD card: support 32G SD memory card
I/O interface: 1 channel alarm input, connect 3 and 4 interfaces （ ground,
trigger by low electric level ） ； TTL to control output, connect 1 and 2
interfaces （ 1 ， 2 short connection ） .
4.
4.
4.
4. NETWORK
NETWORK
NETWORK
NETWORK CONNECTION
CONNECTION
CONNECTION
CONNECTION
P
P
P
P icture
icture
icture
icture 3-
3-
3-
3- network
network
network
network connection
connection
connection
connection scheme
scheme
scheme
scheme
4.1 . CONNECTION INSTRUCTION
Before access IP Camera, first to confirm the network connection and the
power supply, to check if the status lens normal. For connection as picture
3:
1 ） camera-1 and camera-2 is connected to two different LANs
2 ） the two LANs must connect to internet and have routers connecting
through ADSL or optical fiber, etc.
3 ） computer-3 should be a device connecting to internet
4.2 . ACCESS INSTRUCTION
F or accessing camera, in addition to communication links remain open, it
also requires a simple settings for camera and network:
1 ） computer and camera are in the same LAN
F or access IP Camera via LAN, it should be confirmed that the computer
and camera in the same subnet, if they are not, then need to configure

MF2E-E -B 2
- 9 -
the IP Camera, for example : in picture 5 camera-1 ’ s IP is 192.168.1.126
（ located in subnet 192.168.1 ） ， PC-1 ’ s IP is 192.168.0.100 （ located in
192.168.0 ） ， on this case, PC-1 can not access IP Camera-1, after changing
IP Camera-1 ’ s IP into 192.168.0.126, it can access;
2 ） computer and camera are in different LANs, but both of them can access
internet.
F or camera-1 and computer-2 in picture 3, to access camera-1 through
computer-2, then need to set step 1 ） first to confirm computer-1 can access
camera-1, then configure router-1 （ router-1 should support port
forwarding ） , then computer-2 can apply to access camera-1 via router-1.
Normally, computer-2 only can send message to router-1, so it can not
access camera-1 without configuration of router-1.
4.3 . CONNECT NETWORK VIA ADSL
�
Connect device to computer via cable .
�
Configure device basic settings through IP Camera tool ( details refer to : 5.1
IPcamera tool ).
�
Login device as administrator, access PPPOE setting page to input account user
and password .

MF2E-E -B 2
- 10 -
�
Meanwhile to enable DDNS server function then click <
<
<
< set
set
set
set >
>
>
>to restart
device .( details refer to : 5.6 ddns settings )
�
Connect device to internet via ADSL , then it can be accessed via ddns through
WAN .
4.4 . CONNECT NETWORK VIA ROUTER
5.
5.
5.
5. SOFTWARE
SOFTWARE
SOFTWARE
SOFTWARE OPERATION
OPERATION
OPERATION
OPERATION
5.1 . IPcamera TOOL
I n picture 3, camera-1 ’ s IP is not in the same subnet with computer-1, it can not
be accessed, to run Devfind.exe in CD, click search button then click-on
searched IP Camera, then we can configure the settings, interface as picture 4.
1)
1)
1)
1) Connect device to LAN through cable
2)
2)
2)
2) Configure device through IPcam tool .
( Details refer to : 5.1 IPcamera tool )
3)
3)
3)
3) Access device as administrator .
4)
4)
4)
4) Access ddns setting page to enable DDNS
service then click <
<
<
< set
set
set
set >
>
>
>to restart device .
(Details refer to :5.6 ddns settings )
5)
5)
5)
5) Then it can be accessed through internet .

MF2E-E -B 2
- 11 -
P
P
P
P icture
icture
icture
icture 4-
4-
4-
4- LAN
LAN
LAN
LAN configuration
configuration
configuration
configuration interface
interface
interface
interface
N otice: device factory set IP: 192.168.1.126 ， port 81
Detail configuration:
�Please carefully check current computer information on right down side
of interface, it lists information about computer-1 ’ s IP
configuration, if there are more network adapters in computer, please
select the right network that camera-1 working on.
�IP address: configure IP address, it must confirm to be the same subnet
within PC .
�M ask: default mask: 255.255.255.0
�Gateway: confirm the PC within the same gateway
�DNS :DNS provider ’ s IP address
�P ort: device provides HTTP service port, default is 81
�U ser and password :
:
:
:default administrator account user: admin , no
password
5.2 . LOGIN IP CAMERA
W e can directly access IPCAM through IP
IP
IP
IP Camera
Camera
Camera
Camera Search
Search
Search
Search Tool
Tool
Tool
Tool or IE
IE
IE
IE .
1) Double click option IE in device list to open login page
2) Directly access via IE by inputting address on address blank of IE browser . As below:

MF2E-E -B 2
- 12 -
P icture 5 login interface
A fter installation, we can access video view page, as picture 7:
T his option for IE browser
T his option for smart phone

MF2E-E -B 2
- 13 -
5.3 . USER OPERATION
I f the pilot
is ,
it means the device is connecting network
C lick to 4-picture view; click to 9-picture view
R ecord: click to manually record
S napshot: click to snapshoot picture
L isten: click ，it should turn ，then speak to camera, the sound can
be heard from computer terminal, click again to close listen function
T alk: click ， it turns ， talk to camera （ through headset
connecting computer ） ， then we can hear the talking around
camera . Click again
to close talk function.
5.4 . MULTIDEVICE CONFIGURATION
O n multi-device configuration page, we can see all devices in the LAN.
The first device is default device. We can add more devices listing in
the device list. It can support 9 pieces of devices on line at the same
time for embedded system. Click “ the second channel device ” then double
click on device option, name, host address and Http port of “ current LAN
devices list ” ， the information will be auto wrote in, then correctly
input access user name and password then click “ add ” . Repeat that to
add more devices.

MF2E-E -B 2
- 14 -
N otice: do not forget to click save for configuration
P
P
P
P icture
icture
icture
icture 7-
7-
7-
7- multi-view
multi-view
multi-view
multi-view configuration
configuration
configuration
configuration
P
P
P
P icture
icture
icture
icture 8-
8-
8-
8- 4-picutre
4-picutre
4-picutre
4-picutre

MF2E-E -B 2
- 15 -
P
P
P
P icture
icture
icture
icture 9-
9-
9-
9- 9-picture
9-picture
9-picture
9-picture
5.5 . NETWORK CONFIGURATION
�
�
�
�BASIC
BASIC
BASIC
BASIC NETWORK
NETWORK
NETWORK
NETWORK CONFIGURATION
CONFIGURATION
CONFIGURATION
CONFIGURATION
IP address configuration: manually modify IP, mask, gateway, DNS, etc.
Http port: normally, the default port is 81. If the internet provider block
the port, we can set others(range: from 0 to 65535 ） ， such as 8080 ， 85 ，
8888, etc.
P icture 10- network configuration
�
�
�
�WIFI
WIFI
WIFI
WIFI CONFIGURATION
CONFIGURATION
CONFIGURATION
CONFIGURATION

MF2E-E -B 2
- 16 -
To enable WIFI configuration referring to picture 11 ， click “ Search ”
button ， then will pop up a page of searched wireless network ， select the
right wireless network ， then all parameter of the wireless network will
auto write into the parameter blanks such as shown in picture 11 （ such
as SSID, encryption, etc. ） ， then input password and check it is ok. After
configuration ， click “ Save & restart ” button;
N otice: the wireless function should be enabled on wired condition
P icture 12- WIFI configuration
5.6 . DDNS SETTINGS
I n picture 3 ， router-1 acquire external IP address through ADSL ， and the
IP address is dynamic ， when we want to access device from internet ， we
do not know what is the IP address ， hence ， we should acquire the address
via dynamic domain name server in internet ， the camera-1 send a message
to dynamic domain name server(ddns) from time to time ， then the ddns can
analyze the external IP address of the router-1 camera-1 connected ， we
can acquire the IP address of the server through dynamic domain name.
Actually ， the dynamic domain name stands for dynamic IP address ， if we
can not access device through IP address, the dynamic domain name is not
available.
�
�
�
�MANUFACTURER
MANUFACTURER
MANUFACTURER
MANUFACTURER DDNS
DDNS
DDNS
DDNS
T he manufacturer has set up ddns in internet ， and provide a dynamic domain name for
each device ， and the settings has been done when the device produced ， such as shown
in picture 13. After set remote configuration ， input the dynamic domain name in
browser address blank, then the address will be analyzed as the right IP address
of device ， and start to connect device.

MF2E-E -B 2
- 17 -
P
P
P
P icture
icture
icture
icture 13-
13-
13-
13- DDNS
DDNS
DDNS
DDNS configuration
configuration
configuration
configuration
N otice: the dynamic domain name uses forwarding mode to access device,
it auto changes into the IP address and port relating to device.
N otice 2: on it can access device via IP address but not dynamic domain
name condition ， please check the DNS configuration whether it is available
and confirm the configuration is attaching with LAN configuration in
computer.
�
�
�
�THIRD PARTY DDNS ACCESS
If it is some reason that can not use the manufacturer ddns ， we also can
apply third party ddns as instead ， such as www.3322.org domain system ，
login this kind of web to apply a free dynamic domain name ， then input
information as shown in picture 14 ， after save, then we can access with
the dynamic domain name.
N otice: usually, third party ddns uses analyzing mode to access device ，
it will keep the link still after inputting on browser ， if device port
is not 80 ， then need to add a ” : ” then the port behind dynamic domain
name ， such as: http://ipcam.3322.org:81

MF2E-E -B 2
- 18 -
5.7 . EMAIL SERVICE SETTINGS
P icture 14- email service configuration
I n picture 14, the configured content is must ， if that information is not
correct ， then the configuration is failed.
N otice: before configuring this page, please confirm the email
i nformation is available.
�SMTP server: input the SMTP server of email server
�S ender address: input email address to send email
�Receiver address: input email address to receive snapshots and IP
�address. I t can support 4 receivers .
5.8 . MOTION DETECTION
S elect motion detection to monitor a fixed area, it will trigger alarm
when there is abnormal situation. T he configuration interface as picture
22 ， device can support 16 areas of motion detection ， tick on option under
viewing window to enable the function of selected area. A fter enabling
the area ， the screen will show a area frame and area number ， click mouse
on the frame to drag to anywhere ， also the frame size can be changed by
dragging the right-down corner of the frame. A fter configuration , click
apply button to enable the settings.
I nput email server
I nput sender email
I nput receiver email
L ogin name
L ogin password
C lick to save
A fter save, click to test

MF2E-E -B 2
- 19 -
P icture 15- motion detection
�M otion detection area: it can trigger email alarm and record linkage
after enabling motion detection, and support 16 different areas
�Sensitivity : it supports to choose different sensitivities from 0 to 30, 30
is the highest.
�M otion detection alarm: email alarm linkage, FTP upload picture, siren ，
etc.
�GPIO
GPIO
GPIO
GPIO input
input
input
input alarm:
alarm:
alarm:
alarm: support external alarm sensor ，it can trigger alarm linkage
when alarming, such as email notice, FTP upload picture, etc.
P icture 16- motion detection configuration
6.
6.
6.
6. System
System
System
System Requirements
Requirements
Requirements
Requirements

MF2E-E -B 2
- 20 -
6.1. IPCAM Requirements
1.SIPCAM= M series
2.MIPCAM=M1 series
3.MJPG=F2 series
4.HBMJPG=F series
6.2. Host System Requirements
Operation System Requirements: Above version of Windows2000 Server or
WindowsXP Professional .
Memory Requirements:above DDR 2 GB
Hard Disk Requirements:The above 320GB
R esolution Requirements: above 1 280 * 1024
6.3. Login System
D ouble Click to run the main process ,a dialog box shows:
You can enter into Main Interface after input accurate UserName and Password .And
system have a default administrater named admin , use this UserName , with this
UserName you can enter into Main Interface without password.
Notice:If
Notice:If
Notice:If
Notice:If Login
Login
Login
Login as
as
as
as a
a
a
a common
common
common
common user
user
user
user ,some
,some
,some
,some functions
functions
functions
functions can
can
can
can ’
’
’
’ t
t
t
t be
be
be
be used
used
used
used
6.4. Forwarding Service Configuration Guide
Click to log into the forwarding service configuration will guide interface: