Easyn H3 series User manual

MH3E-E-A 2- 1 -

Forword

This series product is specific on network video surveillance including wired box

camera,

wireless box

camera, wired dome

camera wired IR waterproof

camera, etc. It uses

processor with high-performance chips to realize audio/video capture, compression, transmission,

and the standard H.264 coding algorithm can confirm the clear-fluent effect of video transmission.

It supports user to view real-time video and remote control

via

browser such as IE, super client

software and APP platform.

The se series of IP camera can be used for remotely monitoring places such as enterprises

chain stores ,factories and home ,etc .i t is easy to install to operate . Please check the items ,if

th ere ’ s any missing things , please contac tthe seller immediately.

Please check

the accessories are

all

before installation. If there is any missing, please contact

seller timely.

List

List of

of items:

items:

IP camera --------------------------------------------1 pc

Bracket （refer to model ）------------------------------------- 1 pc

Power adapter -------------------------------------------- 1 pc

Certificate------------------------------------------------- 1 pc

CD--------------------------------------------------- 1 pc

Warranty card--------------------------------------------------1 pc

Instruction

Instruction ：

IP Camera

is network camera ；PC

is computer ；single click ：left click of mouse ；double click

：

double left click of mouse.

IP Camera default administrator user name: admin ，password: admin

Default LAN(local area network)IP address ：192.168.1.126 ，port ：81

Statement

Statement ：

The device ’ s version

the manual may be different from the current device ’ s version,

you

shoudldn ’ t use “ u ” here for the formal documentation ,should use “ you ” the installation can not

finish referring to the manual, please contact seller.

The weill be updated manufacture preserves authority of content update from time to time.

MH3E-E-A 2- 2 -

Forword

Forword ....................................................................................................................... - 1 -

2 Features ...................................................................................................................... - 3 -

3 Appearance and interface .............................................................................................. - 5 -

3.1 Device appearance ............................................................................................. - 5 -

3.2 Device interface ................................................................................................. - 5 -

4 Network connection ..................................................................................................... - 6 -

4.1 Connection instruction ........................................................................................ - 6 -

4.2 Access instruction .............................................................................................. - 6 -

4.3 Connect network via ADSL ................................................................................. - 7 -

4.4 Access network through router ............................................................................. - 7 -

5. Software operati ng ....................................................................................................... - 7 -

5.1 IPcamera tool .................................................................................................... - 8 -

5.2 Login device ...................................................................................................... - 9 -

5.3 Operations ....................................................................................................... - 10 -

5.4 Basic network configuration .............................................................................. - 11 -

5.5 DDNS configuration ......................................................................................... - 12 -

5.6 E-mail service configuration .............................................................................. - 13 -

6 Central Management .................................................................................................. - 13 -

6.1 Installation ...................................................................................................... - 13 -

6.2 Installation steps .............................................................................................. - 14 -

6.3 Login and Logout ............................................................................................. - 14 -

6.4 Software interface ............................................................................................ - 15 -

6.5 Device management ......................................................................................... - 17 -

6.6 Image preview ................................................................................................. - 19 -

6.7 PTZ control ..................................................................................................... - 22 -

6.8 Video management ........................................................................................... - 24 -

6.9 Playback ......................................................................................................... - 27 -

6.10 Electron map .................................................................................................. - 29 -

6.12 User management ........................................................................................... - 34 -

6.13 Log ............................................................................................................... - 34 -

6.14 Other settings ................................................................................................. - 35 -

7 Port forwarding ......................................................................................................... - 36 -

8 Appendix .................................................................................................................. - 36 -

8.1 Common issue ................................................................................................. - 36 -

8.2 Warranty instruction ......................................................................................... - 37 -

8.3 Warranty card .................................................................................................. - 38 -

MH3E-E-A 2- 3 -

1Product

Product

Product Overview

Overview

IP Camera

designed as web server running on network,

can

transmit real-time

video to anywhere through internet, and user

can

view real-time live video via web

browser any time.

available to large stores, schools, factories, houses, etc.

Basic function: IPCAM can transmit real-time live video data to remote place through

internet with hardware compression method MJPE which providing high-quality

video image and 25fps frame rate

LAN/WAN (local area network/wide area

network).

The IPCAM video data transmission

based

TCP/IP protocol, built-in web server

supporting Internet Explore, thus ，

make more easy to manage and maintain the

devices to remotely configure, start and upgrade firmware, etc.

Please check

the items are

all

in before installation of IP camera,

there

some missing, please contact seller

2 Features

Features

●

powerful high speed video protocol processor

●

high

sensitive and high definition CMOS sensor

●

0.3 megapixels resolution

● IR

night vision

●

Optimized H.264 video compression algorithm, realize to transmit

high

definition

image through narrow bandwidth

●

multiuser management and password

●

support browser （IE browser ，Firefox browser ，Google browser, etc ）

●

support wireless network(WiFi/802.11/b/g)

●

support dynamic DNS (DDNS)

●

support max size 32G SD card ，snapshot and record

alarm

●

motion detection

●

support two-way audio

●

image snapshot

●

support mobile phone view

●

log

●

support network protocols: HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP

MH3E-E-A 2- 4 -

Features Superiority

Support monitor via computer and most of intelligent cellphone on the

market(such as Android ,Iphone cellphone

mobile software Provide special software for the iPhone or android mobile phone

DDNS （free ）Built

free DDNS system,like http://demo.easyn.hk, 'demo' is serial code

CMS software EasyN multi-window mangement software

System security Supports three-level account, password, user multi-level authority management

Local memory

Support 32G TF card local memory,support alarm recording and picture

memory , Support EasyN NVR

CPU Operation system Embedded Linux OS

Microcomputer processor 32Bit RSIC Embedded Processor

Network Network interface RJ-45 10/100Mb self-adaptable Ethernet slot

Protocol Support HTTP ，UDP ，SMTP ，FTP ，DHCP ，DNS ，DDNS ，NTP ，UPNP

Wireless Wifi802.11 b/g/n

IP mode Dynamic IP address, static IP address, PPPOE

Online visitor Main stream support 5 visitors at the same time

Time stream support 6 visitors at the same time

Video Compression format

H.264 、Double streaming compression

Image sensor 1/4 SONY CCD

Lens Standard: 3.6mm

Frame rate 1-25fps

Resolution Main stream :DI(704*576) ，Time stream :CIF （352*288 ）

Image adjustment Brightness, contrast, color saturation,chroma

WB, BLC Auto

LUX 0.3LUX/F1.2

SNR >48dB

Audio Compression format G.711/G.726

Input Two way audio,one channel linear input,one channel linear output

Output Audio output

PTZ Motor Built-in motor control

Rotation angle Horizontal:355 ° vertical: 80 °

Preset

External RS485 control

PTZ Protocol PELCO-D Protocol, baud rate

9600 address ：1

Nightvision Filter switch Can auto-switch automatically, without color cast

Nightvision 13 Φ 3 LED lights IR distance: 10m

Alarm Input/output

1 channel RS485

Alarm detection Motion detection

Detection area Support 4 detection area

Alarm notification Email notification,picture,FTP server ; save the recording and picture to tf card

MH3E-E-A 2- 5 -

Others Shape material plastic

Environment indoors

Power supply

DC12V 2A

Operating temperature

-10~ 50 °

Operating humidity

10%~90%RH

Dimension

Item size

130x120x120mm (L*W*H)

Package size ：170 x170x 170mm (L*W*H)

Weight Item weight ：470g （Note:for real products ）

Package weight ：725g

Accessories Power adapter,CD,manual,warranty card,srews ,bracket ,antenna

System System requirement Microsoft Win98 SE/ME/2000/XP,Vista IE5.0, NET4.5 ，firefox ，chrome

Certification Certificate CE FCC ROHS ISO

3 Appearance

Appearance

Appearance and

and

and interface

interface

3.1

3.1 Device

Device

Device appearance

appearance

Picture

Picture 1-

1- device

device

device appearance

appearance

MH3E-E-A 2- 6 -

3.2

3.2 Device

Device

Device interface

interface

Picture

Picture 2-

2- device

device

device interface

interface

power

power ：external power adapter DC 5V/2A

Ethernet

Ethernet interface

interface

interface ：10/100M self-adaptable Ethernet interface ，can connect to many network

devices, such as hub, router, switch, etc.

Network

Network light

light

light ：flickering when network connecting

Power

Power light

light

light ：always

when power on

SD card

card

card ：support 32G SD card

I/O

I/O interface

interface

interface ：one channel alarm input

with

3，4 pins （input grounded ，low electric

level trigger ）； TTL control for output with 1 ，2 pins （1，2 short-circuit ）.

MH3E-E-A 2- 7 -

4 Network

Network

Network connection

connection

Picture

Picture 3-

3- network

network

network connection

connection

connection guide

guide

4.1

4.1 Connection

Connection

Connection instruction

instruction

Connect camera to router and connect power adapter before accessing IP Camera ，and

check the network light and power light

normal, confirm the cable status

good. To connection mode in picture 3 ：

1）camera-1 and camera-2 separately connect to two different LANS

2）the two LANS must directly connect to internet ，and there

router

in the LAN ，the connection mode can be ADSL or optical fiber, etc.

3）computer-3 can access internet

4.2

4.2 Access

Access

Access instruction

instruction

For accessing camera,

should configure some simple settings on the cable in good

status ：

1）computer

computer

computer and

and

and camera

camera

camera should

should

should be

be in

in the

the

the same

same

same subnet

subnet

To access camera via inner access link(ip link),

should confirm the computer to be

in the same subnet with the camera, otherwise

needs to configure the IP for IP

Camera ，for example: camera-1 in picture5 has IP 192.168.1.126 （

in subnet

192.168.1 ），PC-1

’

s IP

192.168.0.100 （

in subnet 192.168.0 ）， then PC-1 can not

access Camera-1 through inner link, so we should change Camera-1

’

s IP into

192.168.0.126 ；

2）computer

computer

computer and

and

and camera

camera

camera are

are

are in

in different

different

different LAN,

LAN,

LAN, but

but

but both

both

both can

can

can access

access

access internet

internet

Refer to picutre3 camera-1 and computer-2 ，

we want to access camera-1 through

computer-2 ，then need to configure some settings following 1 ）， to confirm

MH3E-E-A 2- 8 -

computer-1 can access camera-1 ，then configure router-1 （do port forwarding in

router-1 ）， to transfer the computer-2

’

s access apply to go through router-1 then to

camera-1. Normally, computer-2

only

can reach router-1 without port forwarding for

camera-1.

4.3

4.3 Connect

Connect

Connect network

network

network via

via

via ADSL

ADSL

�Connect camera to router through cable.

�Configure parameters via IP Camera tool (refer

to:

5.1 IPcamera tool ).

�Login device by administrator ，access PPPOE settings page to input user and password..

�After information input click “ Set ” by enabling DDNS service meanwhile to restart

device.(refer

to:

5.6 DDNS configuration )

�Connect to internet via ADSL then we can access camera by domain name link through

internet.

4.4

4.4 Access

Access

Access network

network

network through

through

through router

router

5. Software

Software

Software operati

operati

operati ng

1) Connect device to LAN via cable

2) Configure device

’

s parameters .( refer to

5.1

IPcamera tool )

3) Access device with administrator .

4) Access ddns settings page to enable DDNS

service then click “ Set ” to restart device . ( Refer to

5.6 DDNS configuration )

5) Access with ddns link through internet .

MH3E-E-A 2- 9 -

5. Software

Software

Software operation

operation

5.1

5.1 IPcamera

IPcamera

IPcamera tool

tool

In picture 3 ，camera-1 and computer-1 are

different subnets ，run Devfind.exe

CD ，click

search ，then select searched IP Camera to modify the parameters ，refer to picture 4.

Picture

Picture 4-

4- LAN

LAN

LAN configuration

configuration

configuration interface

interface

Note ：the default parameters of camera:

192.168.1.126

192.168.1.126 ，port 81

Details

Details ：

�Please notice left-up side interface the current parameters of computer,

shows

the basic network parameters of computer-1,if the computer has more than one

network adapters, please select the right adapter the camera-1 working on.

�IP address: input IP address ，the IP must be in the same subnet with computer.

�Mask

default mask: 255.255.255.0

�Gateway: confirm the gateway to be the same one for camera and computer

�DNS: DNS server IP address

�Port: the HTTP service port of device ，default

�User and password

default account

user: admin no password

MH3E-E-A 2- 10 -

5.2

5.2 Login

device

IPCAM can be accessed from “ open ” function

camera finder or directly by inputting access link

(IP added port)

via

browser.

The two sentences should be

,same size,same font ,right?

Picture

Picture 5

5 login

interface

MH3E-E-A 2- 11 -

5.3

5.3 Operations

Operations

Record: click

Snapshot: click

Listen: click ，

will

change into ，then we can listen sound coming

from camera terminal

computer monitoring interface, click again to disable the

function.

Talk:

click ，it will change into ，then we can talk

camera terminal via

headset on computer terminal. Click again

disable the function.

MH3E-E-A 2- 12 -

5.4

5.4 Basic

Basic

Basic network

network

network configuration

configuration

�

�Basic

Basic

Basic network

network

network configuration

configuration

address:

can support manually modifying

IP,

mask, gateway, DNS, etc.

Http

Http port:

port:

port: In most cases, the default port

81. but

the current network limits the

port, we should select other port ranged 0 to 65535, such as 8080 ，85 ，8888, etc.

Picture

Picture 10-

10-

10- network

network

network parameters

parameters

parameters configuration

configuration

�

�Wireless

Wireless

Wireless network

network

network configuration

configuration

The settings interface as picture 11 ，click “ search ” button ，then

will

pop

a page to

display list of searched

wifi

network ，select the network to join in, the parameters of

the network

will

fill

in the options blank （such as SSID, encryption algorithm, etc ）

，

user need to input password and confirm password. After configuration ，click

“

set ”

button.

Note: please cable connect device before configuring wifi ，after set, restart device to

enable

wifi

function.

Picture

Picture 12-

12-

12- wifi

wifi

wifi configuration

configuration

MH3E-E-A 2- 13 -

5.5

5.5 DDNS

DDNS

DDNS configuration

configuration

In picture 3 ，router-1 obtain wide area network IP address through ADSL ，the IP

address

dynamic ，we could

not

know the real-time IP address of the device from

internet ，therefore ，we need to obtain the address through DDNS server in internet

，

camera-1

will

send message to the DDNS server for each defined-interval time ，the

DDNS server analyze the IP address of router-1

connected ，then we

can

obtain the

IP address from DDNS server. Therefore ，the domain name stands for the dynamic IP

address ，

the device

can

not be found by IP address ，the domain name

not

available.

�

�Manufacture

Manufacture

Manufacture DDNS

DDNS

DDNS settings

settings

The manufacture has set up DDNS server

internet, and distributed domain name for each

device ，the domain name has build

device ，as picture 13. Input the domain name link to

browsers ，the link will change into the real IP address of the device and start to connect device.

Picture

Picture 13-

13-

13- DDNS

DDNS

DDNS configuration

configuration

Note 1:

1: the ddns function

realized by transferring method, when access device

through domain name link,

will

automatically change into device

’

s IP and port.

Note 2:

the device can be accessed

IP address but not domain name link ，please

verify the DNS configuration

available, and confirm the DNS

the same with

LAN settings.

�

�Third

Third

Third party

party

party DDNS

DDNS

DDNS configuration

configuration

The product also can support third party DDNS, such as Oray.

Note: the third party DDNS realizes the function

analytical methods ，after

inputting the ddns in browser, the characters would not change,

the port

not 80

，

MH3E-E-A 2- 14 -

need to add a colon and port behind the ddns ，such as:

http://easyn.3322.org:81

5.6

5.6 E-mail

E-mail

E-mail service

service

service configuration

configuration

Picture

Picture 14-

14-

14- email

email service

service

service configuration

configuration

The information

picture 14

must ，

some options are not correct ，the settings

would not work.

Note:

best test the settings

Outlook Express

before configuration to confirm the

settings working.

�SMTP:

SMTP:

SMTP: input e-mail SMTP server

�Sender

Sender

Sender address:

address:

address: e-mail address to send mail

�Receiver

Receiver

Receiver address:

address:

address: e-mail address to receive snapshot and IP address.

can

support

4 receivers.

�

6 Central

Central

Central Management

Management

6.1

6.1 Installation

Installation

1. Requirement

Requirement

Hardware

Hardware condition:

condition:

1、Pentium

series ，CPU frequency above 2.0G

2、memory above 2G

3、hard disk >= 120G

4、monitor 102 4 × 768 or above

MH3E-E-A 2- 15 -

Software

Software condition:

condition:

Windows2000/WindowsXP/Windows2003/Windows Vista/Windows

7，recommendation Windows XP

6.2

6.2 Installation

Installation

Installation steps

steps

Double click installation package ，

pops up as below:

Select path then click “ next ” .

After installation,

creates an icon on desktop as below:

At program list as below:

6.3

6.3 Login

and

and Logout

Logout

MH3E-E-A 2- 16 -

【Login 】the default user is admin and no password ，click “ ok ” to access software main interface.

【Logout 】only admin authority can logout ，user and guest authority can not

It needs to input administrator user and password when logout.

6.4

6.4 Software

Software

Software interface

interface

Software interface includes six blocks:

1 system button list 2 label list 3 devices list

4 real-time preview 5 PTZ control 6 alarm info list

◆system button list:

help button, click to open client

use

manual

hidden button, click to hide software to system hidden list

exit button, click to pop up logout dialog

◆label list:

LOGO information

MH3E-E-A 2- 17 -

Click to change to preview interface

Click to change to playback interface

Click to change to map operating interface

Click to change to configuration interface

Click to change to log operating interface

Logout or change user

Click to logout

◆Devices list:

【List mode 】display area, settings and channel from user set

【Group mode 】display group and channel from user set

【Current screen 】display devices current screen connected, only available

List mode

◆Real-time preview

electronic enlarging button ，circle

area after click to enable

audio talk button, select the right window then click button to enable,

only support unique device to talk at one time

Listen button, click to enable/disable listen, support multi-listen

Record button, select the right window, click to enable/disable recording

Snapshot button, select the right widow, click button to snapshoot, support to

snapshoot twice in one second

SD card button, select window, click button to open SD card page to see

inside information

Multi-picture button, click to enable multi-picture view

Full

screen button, click to full-screen view

real-time-area view

Front group button, click to show the front group view on circleview mode

Next group button, click to show the next group view on circle view

MH3E-E-A 2- 18 -

mode

Circle view button, single click to enable/disable

Devices list fold/unfold button, click to fold/unfold

Alarm information list fold/unfold button, click to fold/unfold

2.3 DEVICE MANAGEMENT

2.3.1 Add device

Firstly click

“

Config ” button on label list to access device management page.

6.5 Device management

1. Add device

Firstly click

“

Config ” button on label list to access device management page.

【Add list 】

◆At first time

run,

the default list

null, click “ Add Area ” button, pop

“

Add Area ” dialog, and input a name on name blank to add

area

into device list. That

the first area, so there

no belonging area

it,

means the belonging area

null.

Notice:

can support 128 areas presently

Add area into device list

Modify name

selected area

Delete selected area

Add device manually

Click to pop up configuration dialog

Delete selected device

Add searched device into selected area

Click to search devices in LAN

Select

all

devices in list

【Add device 】

◆Search and add device in LAN:

Click search button, then select device in search list to add, click

MH3E-E-A 2- 19 -

button to add device to area.

◆Add device manually:

Click button then pop up add device dialog, as below:

【Name 】Device name, support custom, length less than 30 byte.

Only display name instead of IP after input name.

【Channel 】Support different channel on case that one device

has

many

channels, presently device only supports one channel.

【IP or Domain name 】Device IP or domain name

【Port 】Device http port, default

【User name 】Device login name, default

admin

【Password 】Device

password, default

admin

【Area 】Device displaying area

After input

all

needed information, click OK button to finish ADD

2.3.2 Group management

◆Add group:

Click button, input group

name into pop-up dialog then click OK

Notice: support 20 groups

◆Configure group

Other manuals for H3 series

Table of contents

Other EasyN IP Camera manuals

EasyN

EasyN H Series User manual

EasyN

EasyN F Series User manual

EasyN

EasyN F2 series User manual

EasyN

EasyN FS-613A F Series User manual

EasyN

EasyN H3 series User manual

EasyN

EasyN P1 User manual

Popular IP Camera manuals by other brands

Cablematic

Cablematic 720P user manual

top0

top0 T7P-SDI Series user manual

Honeywell

Honeywell HBD2FR1 user manual

Prime

Prime IM-PT320 user manual

Technaxx

Technaxx HD TX-24 user manual

Eneo

Eneo Minitrax HDD-1012PTZ1080 Full manual

NVR HD

NVR HD SMK-PA9104RH20 Quick operation guide

AVer

AVer CAM570 quick start guide

GeoVision

GeoVision GV-MFD120 quick start guide

YUNEEC

YUNEEC CGO2-GB quick start guide

Owon

Owon IPC803 quick start guide

Axis

Axis M3007-P user manual

YesCam

YesCam Yes737 user manual

Atlantis Land

Atlantis Land NetCamera A02-IPCAM-W54 quick start guide

Planet

Planet ICA-310 user manual

FLIR

FLIR Quasar CM-6206-H1-I Quick installation guide

Ikegami

Ikegami IPD-BX11 instruction manual

Channel Vision

Channel Vision 6544 instructions