EasyN H3 series User manual

MH3E-E-A2
- 1 -
Forword
This series product is specific on network video surveillance including wired box ip camera,
wireless box ip camera, wired dome ip camera wired IR waterproof ip camera, etc. It uses
processor with high-performance chips to realize audio/video capture, compression, transmission,
and the standard Motion-JPEG coding algorithm can confirm the clear-fluent effect of video
transmission. It supports user to view real-time video and remote control via browser such as IE,
super client software and APP platform.
These series of IP camera can be used for remotely monitoring places such as enterprises
chain stores ,factories and home ,etc .it is easy to install to operate .Please check the items ,if
there’s any missing things ,please contactthe seller immediately.
Please check if the accessories are all in before installation. If there is any missing, please contact
seller timely.
List of items:
IP camera --------------------------------------------1 pc
Bracket（refer to model）------------------------------------- 1 pc
Power adapter -------------------------------------------- 1 pc
Certificate------------------------------------------------- 1 pc
CD--------------------------------------------------- 1 pc
Warranty card--------------------------------------------------1 pc
Instruction：
IP Camera it is network camera；PC it is computer；single click：left click of mouse；double click：
double left click of mouse.
IP Camera default administrator user name: admin，password: admin
Default LAN(local area network)IP address：192.168.1.126，port：81
Statement：
The device’s version in the manual may be different from the current device’s version, if you
shoudldn’t use “u” here for the formal documentation ,should use “you” the installation can not
finish referring to the manual, please contact seller.
The weill be updated manufacture preserves authority of content update from time to time.

MH3E-E-A2
- 2 -
Forword ...................................................................................................................................... - 1 -
2 Features..................................................................................................................................... - 3 -
3 Appearance and interface .......................................................................................................... - 5 -
3.1 Device appearance ......................................................................................................... - 5 -
3.2 Device interface ............................................................................................................. - 5 -
4 Network connection .................................................................................................................. - 6 -
4.1 Connection instruction ................................................................................................... - 6 -
4.2 Access instruction .......................................................................................................... - 6 -
4.3 Connect network via ADSL ........................................................................................... - 7 -
4.4 Access network through router....................................................................................... - 7 -
5.Software operating .................................................................................................................... - 7 -
5.1 IPcamera tool ................................................................................................................. - 8 -
5.2 Login device................................................................................................................... - 9 -
5.3 Operations .................................................................................................................... - 10 -
5.4 Basic network configuration ........................................................................................ - 11 -
5.5 DDNS configuration .................................................................................................... - 12 -
5.6 E-mail service configuration ........................................................................................ - 13 -
6 Central Management ............................................................................................................... - 13 -
6.1 Installation.................................................................................................................... - 13 -
6.2 Installation steps........................................................................................................... - 14 -
6.3 Login and Logout......................................................................................................... - 14 -
6.4 Software interface ........................................................................................................ - 15 -
6.5 Device management..................................................................................................... - 17 -
6.6 Image preview.............................................................................................................. - 19 -
6.7 PTZ control .................................................................................................................. - 22 -
6.8 Video management....................................................................................................... - 24 -
6.9 Playback....................................................................................................................... - 27 -
6.10 Electron map .............................................................................................................. - 29 -
6.12 User management....................................................................................................... - 34 -
6.13 Log ............................................................................................................................. - 34 -
6.14 Other settings ............................................................................................................. - 35 -
7 Port forwarding ....................................................................................................................... - 36 -
8 Appendix ................................................................................................................................. - 36 -
8.1 Common issue.............................................................................................................. - 36 -
8.2 Warranty instruction .................................................................................................... - 37 -
8.3 Warranty card............................................................................................................... - 38 -

MH3E-E-A2
- 3 -
1Product Overview
IP Camera is designed as web server running on network, it can transmit real-time
video to anywhere through internet, and user can view real-time live video via web
browser any time. It is available to large stores, schools, factories, houses, etc.
Basic function: IPCAM can transmit real-time live video data to remote place through
internet with hardware compression method MJPE which providing high-quality
video image and 25fps frame rate on LAN/WAN (local area network/wide area
network).
The IPCAM video data transmission is based on TCP/IP protocol, built-in web server
supporting Internet Explore, thus，it make more easy to manage and maintain the
devices to remotely configure, start and upgrade firmware, etc.
Please check if the items are all in before installation of IP camera, if there
is some missing, please contact seller
2 Features
●powerful high speed video protocol processor
●high sensitive and high definition CMOS sensor
●0.3 megapixels resolution
●IR night vision
●Optimized Motion-JPEG video compression algorithm, realize to transmit high
definition image through narrow bandwidth
●multiuser management and password
●support browser（IE browser，Firefox browser，Google browser, etc）
●support wireless network(WiFi/802.11/b/g)
●support dynamic DNS (DDNS)
●support max size 32G SD card，snapshot and record on alarm
●motion detection
●support two-way audio
●image snapshot
●support mobile phone view
●log

MH3E-E-A2
- 4 -
●support network protocols: HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP
System feature
security Three-level account, password and user authority
management
Built-in ddns
（free）
Built-in unique lifelong free DDNS，no need Oray，no
worry about frequent offline and good speed. Such as
http://demo.ipcam.hk, the series number is "demo"
Mobile phone
platform（free）
No need to install software，IE multi-view and
management，snapshot alarm picture, etc
Superiority Support computer monitoring，support most smart phone
such as Iphone，android, Symbian.
Mobile phone
view
Support Iphone、Windows Mobile、Symbian、Android
directly viewing
Local memory Support 32G SD card local memory to alarm snapshot
and record
Core OS Embedded Linux OS
Processor 32Bit RSIC Embedded Processor
Video
Compression H.264 main profile level 3, main stream and second
stream
Signal system CMOS 0.3 megapixels
Frame rate Main stream：1~25 fps，second stream：1-25 fps
Resolution VGA(640*480),QVGA(320*240) QQVGA（160*120）
Image
adjustment Brightness, contrast, adjustable
BLC AUTO
Network
Interface RJ-45 10/100Mb self-adaptable Ethernet slot
Protocol Support TCP/IP、HTTP、ICMP、DHCP、FTP、SMTP、
PPPoE, etc
Wifi WIFI,802.11 b/g/n
Online user Support 10 users directly access at the same time
Support IP Static ip, dynamic IP, PPPOE
Input/output One channel linear/Mic input, one channel audio output
Alarm
Alarm detect Motion detection, sensitivity configuration
Alarm linkage Support Email, FTP upload image, call preset position,
GPIO control, etc.
Certification Certificate ISO FCC CE SASO RoHS

MH3E-E-A2
- 5 -
3 Appearance and interface
3.1 Device appearance
Picture 1- device appearance
3.2 Device interface
Picture 2- device interface
power：external power adapter DC 5V/2A
Ethernet interface：10/100M self-adaptable Ethernet interface，can connect to many network
devices, such as hub, router, switch, etc.
Network light：flickering when network connecting
Power light：always on when power on
SD card：support 32G SD card
I/O interface：one channel alarm input with 3，4 pins（input grounded，low electric
level trigger）；TTL control for output with 1，2 pins（1，2 short-circuit）.

MH3E-E-A2
- 6 -
4 Network connection
Picture 3- network connection guide
4.1 Connection instruction
Connect camera to router and connect power adapter before accessing IP Camera，and
check the network light and power light if it is normal, confirm the cable status is
good. To connection mode in picture 3：
1）camera-1 and camera-2 separately connect to two different LANS
2）the two LANS must directly connect to internet，and there is router
in the LAN，the connection mode can be ADSL or optical fiber, etc.
3）computer-3 can access internet
4.2 Access instruction
For accessing camera, it should configure some simple settings on the cable in good
status：
1）computer and camera should be in the same subnet
To access camera via inner access link(ip link), it should confirm the computer to be
in the same subnet with the camera, otherwise it needs to configure the IP for IP
Camera，for example: camera-1 in picture5 has IP 192.168.1.126（it is in subnet
192.168.1），PC-1’s IP is 192.168.0.100（it is in subnet 192.168.0），then PC-1 can not
access Camera-1 through inner link, so we should change Camera-1’s IP into
192.168.0.126；
2）computer and camera are in different LAN, but both can access internet
Refer to picutre3 camera-1 and computer-2，if we want to access camera-1 through
computer-2，then need to configure some settings following 1），to confirm

MH3E-E-A2
- 7 -
computer-1 can access camera-1，then configure router-1（do port forwarding in
router-1），to transfer the computer-2’s access apply to go through router-1 then to
camera-1. Normally, computer-2 only can reach router-1 without port forwarding for
camera-1.
4.3 Connect network via ADSL
Connect camera to router through cable.
Configure parameters via IP Camera tool (refer to: 5.1 IPcamera tool).
Login device by administrator，access PPPOE settings page to input user and password..
After information input click “Set” by enabling DDNS service meanwhile to restart
device.(refer to: 5.6 DDNS configuration)
Connect to internet via ADSL then we can access camera by domain name link through
internet.
4.4 Access network through router
5.Software operating
1) Connect device to LAN via cable
2) Configure device’s parameters.(refer to: 5.1
IPcamera tool)
3) Access device with administrator.
4) Access ddns settings page to enable DDNS
service then click “Set” to restart device. (Refer to:
5.6 DDNS configuration)
5) Access with ddns link through internet.

MH3E-E-A2
- 8 -
5.Software operation
5.1 IPcamera tool
In picture 3，camera-1 and computer-1 are in different subnets，run Devfind.exe in CD，click
search，then select searched IP Camera to modify the parameters，refer to picture 4.
Picture 4- LAN configuration interface
Note：the default parameters of camera: IP 192.168.1.126，port 81
Details：
Please notice left-up side interface the current parameters of computer, it shows
the basic network parameters of computer-1,if the computer has more than one
network adapters, please select the right adapter the camera-1 working on.
IP address: input IP address，the IP must be in the same subnet with computer.
Mask: default mask: 255.255.255.0
Gateway: confirm the gateway to be the same one for camera and computer
DNS: DNS server IP address
Port: the HTTP service port of device，default is 81
User and password: default account is user: admin no password

MH3E-E-A2
- 9 -
5.2 Login device
IPCAM can be accessed from “open” function in camera finder or directly by inputting access link
(IP added port) via browser.
The two sentences should be in ,same size,same font ,right?
Picture 5 login interface

MH3E-E-A2
- 10 -
5.3 Operations
Record: click
Snapshot: click
Listen: click ，it will change into ，then we can listen sound coming
from camera terminal on computer monitoring interface, click again to disable the
function.
Talk: click ，it will change into ，then we can talk to camera terminal via
headset on computer terminal. Click again to disable the function.

MH3E-E-A2
- 11 -
5.4 Basic network configuration
Basic network configuration
IP address: it can support manually modifying IP, mask, gateway, DNS, etc.
Http port: In most cases, the default port is 81. but if the current network limits the
port, we should select other port ranged 0 to 65535, such as 8080，85，8888, etc.
Picture 10- network parameters configuration
Wireless network configuration
The settings interface as picture 11，click “search” button，then it will pop up a page to
display list of searched wifi network，select the network to join in, the parameters of
the network will fill in the options blank（such as SSID, encryption algorithm, etc），
user need to input password and confirm password. After configuration，click “set”
button.
Note: please cable connect device before configuring wifi，after set, restart device to
enable wifi function.
Picture 12- wifi configuration

MH3E-E-A2
- 12 -
5.5 DDNS configuration
In picture 3，router-1 obtain wide area network IP address through ADSL，the IP
address is dynamic，we could not know the real-time IP address of the device from
internet，therefore，we need to obtain the address through DDNS server in internet，
camera-1 will send message to the DDNS server for each defined-interval time，the
DDNS server analyze the IP address of router-1 it connected，then we can obtain the
IP address from DDNS server. Therefore，the domain name stands for the dynamic IP
address，if the device can not be found by IP address，the domain name is not
available.
Manufacture DDNS settings
The manufacture has set up DDNS server in internet, and distributed domain name for each
device，the domain name has build in device，as picture 13. Input the domain name link to
browsers，the link will change into the real IP address of the device and start to connect device.
Picture 13- DDNS configuration
Note 1: the ddns function is realized by transferring method, when access device
through domain name link, it will automatically change into device’s IP and port.
Note 2: if the device can be accessed by IP address but not domain name link，please
verify the DNS configuration if it is available, and confirm the DNS is the same with
LAN settings.
Third party DDNS configuration
The product also can support third party DDNS, such as Oray.
Note: the third party DDNS realizes the function by analytical methods，after
inputting the ddns in browser, the characters would not change, if the port is not 80，

MH3E-E-A2
- 13 -
need to add a colon and port behind the ddns，such as:
http://easyn.3322.org:81
5.6 E-mail service configuration
Picture 14- email service configuration
The information in picture 14 is must，if some options are not correct，the settings
would not work.
Note: it is best test the settings in Outlook Express before configuration to confirm the
settings working.
SMTP: input e-mail SMTP server
Sender address: e-mail address to send mail
Receiver address: e-mail address to receive snapshot and IP address. It can support
4 receivers.

6 Central Management
6.1 Installation
1.Requirement
Hardware condition:
1、Pentium IV series，CPU frequency above 2.0G
2、memory above 2G
3、hard disk >= 120G
4、monitor 1024×768 or above

MH3E-E-A2
- 14 -
Software condition:
Windows2000/WindowsXP/Windows2003/Windows Vista/Windows
7，recommendation Windows XP
6.2 Installation steps
Double click installation package，it pops up as below:
Select path then click “next”.
After installation, it creates an icon on desktop as below:
At program list as below:
6.3 Login and Logout

MH3E-E-A2
- 15 -
【Login】the default user is admin and no password，click “ok”to access software main interface.
【Logout】only admin authority can logout，user and guest authority can not
It needs to input administrator user and password when logout.
6.4 Software interface
Software interface includes six blocks:
1systembuttonlist 2labellist 3deviceslist
4real-timepreview 5PTZcontrol 6alarminfolist
◆system button list:
help button, click to open client use manual
hidden button, click to hide software to system hidden list
exit button, click to pop up logout dialog
◆label list:
LOGO information

MH3E-E-A2
- 16 -
Click to change to preview interface
Click to change to playback interface
Click to change to map operating interface
Click to change to configuration interface
Click to change to log operating interface
Logout or change user
Click to logout
◆Devices list:
【List mode 】display area, settings and channel from user set
【Group mode 】display group and channel from user set
【Current screen】display devices current screen connected, only available on
List mode
◆Real-time preview:
electronic enlarging button，circle an area after click to enable
audio talk button, select the right window then click button to enable,
only support unique device to talk at one time
Listen button, click to enable/disable listen, support multi-listen
Record button, select the right window, click to enable/disable recording
Snapshot button, select the right widow, click button to snapshoot, support to
snapshoot twice in one second
SD card button, select window, click button to open SD card page to see
inside information
Multi-picture button, click to enable multi-picture view
Full screen button, click to full-screen view of real-time-area view
Front group button, click to show the front group view on circleview mode
Next group button, click to show the next group view on circle view mode

MH3E-E-A2
- 17 -
Circle view button, single click to enable/disable
Devices list fold/unfold button, click to fold/unfold
Alarm information list fold/unfold button, click to fold/unfold
2.3 DEVICE MANAGEMENT
2.3.1 Add device
Firstly click “Config” button on label list to access device management page.
6.5 Device management
1. Add device
Firstly click “Config” button on label list to access device management page.
【Add list】
◆ At first time run, the default list is null, click “Add Area” button, pop
up “Add Area” dialog, and input a name on name blank to add an area
into device list. That is the first area, so there is no belonging area of it,
it means the belonging area is null.
Notice: it can support 128 areas presently
Addareaintodevicelist
Modify name of selected area
Delete selected area
Add device manually
Click to pop up configuration dialog
Delete selected device
Add searched device into selected area
Click to search devices in LAN
Select all devices in list
【Add device】
◆ Search and add device in LAN:
Click search button, then select device in search list to add, click

MH3E-E-A2
- 18 -
button to add device to area.
◆ Add device manually:
Click button then pop up add device dialog, as below:
【Name】Device name, support custom, length less than 30 byte.
Only display name instead of IP after input name.
【Channel】Support different channel on case that one device has many
channels, presently device only supports one channel.
【IP or Domain name】Device IP or domain name
【Port】Device http port, default is 80
【User name】Device login name, default is admin
【Password】Device login password, default is admin
【Area】Device displaying area
After input all needed information, click OK button to finish ADD
2.3.2 Group management
◆ Add group:
Click button, input group
name into pop-up dialog then click OK
Notice: support 20 groups
◆Configure group

MH3E-E-A2
- 19 -
After add groups, configure groups
Configuration: select group, click “+” in front of device IP or name, then select
Channel 01, click button to add device channel to group.
Notice: single group can support 16-picture view
Add device channel to the group
Remove the device channel from the group
Adjust the order to display devices in the group, selected device
exchanges position with the front device
Adjust the order to display devices in the group, selected device
exchanges position with the next device
Modify the group name and numbers of multipicture, clear group
after modifying, need to create new group
Delete group and devices in the group
6.6 Image preview
After device configuration, click “Preview” button to access main interface,
devices list displays as list tree, click “group” or “list” to exchange
information of group or list. Default viewing screen is 4-picutre, max support
16-picutre view.