easyonHold ProStream LT Owner's manual
The ProStream LT delivers your
custom streaming content 24/7.
https://easyonhold.com/contact/
INSTALLATION AND FEATURES
EOH ProStream LT
To install:
For wired connection: Connect ethernet cable between device and internet
service that allows Port 80 trac.
Plug in the power connector.
Connect audio cable to phone system or overhead speaker amplier.
Adjust volume using buttons on the device and/or your amplier (if applicable).
For wireless connection: obtain a custom conguration le from Easy On Hold
support, containing SSID and PASSWORD. The ProStream can be congured for
private wireless networks by request.
NOTE: For use with copyrighted content provided by Easy On Hold®only.
The ProStream LT outputs a continuous analog audio stream via 3.5mm audio jack.
A very minimalistic port utilization scheme reduces the amount of unique rewall
settings required. The device specications do not change over time, however
settings can be changed easily, using a .txt le, provided by Easy On Hold®loaded via
USB.
• Port 123: Time Synchronization Protocol
• Port 80: TCP HTTP (HyperText Transfer Protocol) - for transferring web pages
• Port 443: TCP HTTPS - HTTP Protocol over TLS/SSL (encrypted transmission)
• Port 53: DNS
• URL: streaming.easyonhold.com or streaming.brandimusic.com
Features
Failover
If a ProStream LT device cannot re-connect to the internet within a time period of
about 4 minutes, audio les (up to 300 MB) that have been loaded into an onboard
memory on the device will begin to play continuously. When the device is able to
reconnect to the internet, streaming immediately resumes.
Reporting
Each ProStream LT device reports connectivity to our support team at regular
intervals.
Wireless Option
Wireless connectivity may be required in situations in which the location of the
phone system is far from an internet access point. For this purpose, the ProStream
LT is built with an internal Wi-Fi antenna.
Static I.P. or DHCP
The ProStream LT can be congured DHCP or STATIC I.P. Preferences are
congured by the Easy On Hold®Support Team prior to shipping.
Port Conguration
ProStream LT Ports
Ethernet cable port
for wired internet
connection.
ETHERNET
Used for programming the device
prior to shipping. In most applications
you will not use this port.
USB
VOLUME
The player produces line-level
audio from this stereo 3.5mm jack.
STEADY ON/OFF BLINK: Playing stream normally.
DOUBLE FLASH BLINK: Playing failover audio les.
STATUS LIGHT
The reset button is used to restart
the device. This is only used during
programming.
RESET
To change the output volume of
the device, press and release the
UP or DN button. Wait 5 seconds
to hear the change. Repeat if
necessary.
AUDIO OUT
Micro-USB type connection for 12 volt
VDC power supply.
POWER
Specications
Power Supply: 12 VDC
Internet: RJ45 10/100
Easy On Hold Sample Rate: 128k mono .mp3
Brandi Music Sample Rate: 192k stereo .mp3
SSH: Enabled; disabled only upon request
Dimensions: 3.7" X 2.5" X 1.1"
Weight: 2.0 LB with packaging
Bandwidth Consumption @ 128k: 0.025 GB/hr.
Bandwidth Consumption @ 192k: 0.13 GB/hr.
In The Box
ProStream LT Device
DC Power Adapter
RCA to 3.5mm Cable - 10 ft.
Ethernet Cable - 7 ft.
3.5mm Mono-to-RCA Audio Connector
Earbud Headphones
Hook-and-Loop Mounting Strips
Packaging and contents subject to change based on availability.
SUPPORT
q+1-888-798-4653
Esupport@easyonhold.com
G
© copyright Easy On Hold®
q+1-888-798-4653
Esupport@easyonhold.com
https://easyonhold.com
Table of contents
