EBKE D3 User manual

EBKE D3 ELECTRIC BIKE
MANUAL

FUNCTIONS
1. Gear shift
2. Dash board
3. Brake handle
4. Handle bar
5. Power button
6. Standpipe
7. Vertical folding clasp
8. Safety buckle
9. Front light
10. Head tube
11. The front fork
12. Tyre
13. Wheel hub
14. Brake disc
15. Disc brake
16. Front fender
17. Frame
18. Pedal
19. Battery box
20. Crank
21. Chain wheel
22. Chain
23. Kickstand
24. Back fender
25. Back light
26. Seat tube
27. Seat
Note: Some details of your bike may be little different from the above
picture due to our product upgrading,which will not affect the usage
Pedal*2 Charger*1 Instruction*1
Warranty card*1
LIST OF ACCESSORIES
Inner hexagon spanner*1
15mm Single open wrench*1
Fender*1 Child seat*1(optional)
Quick start Unfolded folding
Rotation direction
Mount the pedal Clockwise rotation

FUNCTION
INTRODUCTION TO THE ICONS ON METER INTERFACE
INTRODUCTION TO METER
Electric & Assistant mode
When booting the E-bike, default is the ECO mode. Three assistant
mode you can shift, please reference the description in the dashboard
in the instruction. In each of the assistant mode, can speed up
and ride it.
Zero speed booting
When the E-bike on standby mode, you can accelerate with
speeding bar; None zero speed booting: the bike boots when it
runs only (APP controlled)
Cruise control
When you are riding, press the accelerator for 5 ~ 8 seconds,
then release the button , it will maintain and move at the current
speed. If repress the accelerator or brake will cancel the cruise
contol. Hold the brake gently when going downhill, can
recover the part of the power and charge for your Ebike.
For more functions please download the APP ( available for iOS and
Android ), the initial password is :123456.
Charging
Connect the charger to the power plug and then to the Dyu E-
bike.When the charger indicator turns green from red, it shows full
power.
Turn on the EBKE E-bike
Push forward the boot button to turn on the E-bike, the dash
board lights up; push back the boot button to turn off the E-bike.
Battery status
After booting,the dash board lights up, and electricity shows up,
it has four grid, more details can reference the description of
dashboard in the instruction.
Horn
Pressing the horn button, the horn sounds up. Clicking
recommended. When pressing for over 10 seconds, the horn
stops, you need to repress it.
Front light
The middle button in the dashboard is used to switch on/off the
front light. The tail light has to be switched on/off manually.
Definition of
Display Icon
Front Light
Display Icon Display
When the front light is turned on,this icon is always luminous. When
the front light is turned off, it will be lightless. (The users can take this
function for reference when pressing the button on meter to turn on
or turn off light.Other operations to turn on or turn off light is subject
to actual functions.)
On/Off Button
Charge port Horn
Dashboard
Accelerator

FUNCTION OF BUTTON
ELECTRIC INSTRUCTION
When the battery power less -than 30%“ ”，the power meter will monitor if the power lobat is less than
low-voltage protection standard.After the power meter has detected that power lobat is lower than low-voltage
protection standard,the icon “ ” will keep flashing,which warns a battery low-voltage.
FAILURE CODE
Under the Failure Code mode,the current failure code will show up flashing.Please check below description of
failure code:
“EE-1”means that the meter fails to receive the communication signals.
“EE-2” means that the meter fails to send the communication signals.
“EE-3”means that the control board fails.
“EE-4”means that Hall sensor fails.
“EE-5”means default phase fails.
“EE-6” means gear shift handlebar fails.
“EE-7” means that brake handlebar fails.
“EE-8” means assistant sensor fails.
“EE-9”means the motor under low-voltage protection.
When E-bike is working under Cruise Mode,the icon of “ECO,MID HIGH”will display flashing.When the Cruise
function is cancelled,the icon of “ECO,MID,HIGH” will stop flashing.
,
,
,
Current
Mileage
General
Mileage
Current
Speed
Current
Power
It displays the current mileage from start-up,from 0.0 to 9999KM.
Less than 1000hours,mileage displays 0.0 to 999.9KM.
More than 1000hours,mileage displays 1000 to 9999KM.
It displays general mileage,from 0.0 to 9999KM.
Less than 1000hours,mileage displays 0.0 to 999.9KM.
More than 1000hours,mileage displays 1000 to 9999KM.
It displays the current speed.
It displays power range.
Under power-on mode,this button is for turning on or turning off the front light.
Functions of this gear button:ECO means energy-saving mode;
MID means medium grade. HIGH means high grade with circular switch.
ODO,TRIP,Voltage,Failure Code and Circular Adjustment Display.
DescriptionIconName
Front Light
Button
Functional
Button
Adjusting
Button
﹥70% 50%~70% 30%~50% ﹤30%
Power Percentage
Display

Charge between 0 degree- 45 degree, rife between -20 degree to 60 degree, keep the battery dry. Don’t put it in
acid and alkalinity fluid. No rain, fire and heat. Don’t put the battery positive an negative wrong. Don’t damage
disassemble the battery or use the wrong adapter. Don’t charge it over 6 hours and don’t charge it over 2A.
When not using for a long time, please put the battery in dry and cool place and charge it for 2 hours every 2 months.
Follow the instruction or the user will be responsible for the consequence.
When charging, Please be careful of the battery type and voltage, place the battery in open air and don’t put it
under bright sun shine and closed space.
When charging, please place the battery first, then connect the electricity; after charging, cut the electricity then cut
the battery plug. When the green light lights up, turn off the power, don’t connect the battery when not charging.
When charging, if the indicating light goes wrong or some strange smell shows up or the charger is over hot, please
stop charging immediately, them check and repair or replace the charger. When using or storing the charging. In case
of something wrong were dropped into the charger, especially the water or other fluids, please don’t take the
charger when possible. Otherwise, be careful and put it in the cool box. No disassembling the charger yourself.
Please check the brake before riding.
Please brake the rear wheel first.
Be careful of the tightness of brake, use the hexagon wrench when it’s loose.
Rainy and snowy days need longer braking distance.
Suitable age: 16-45 years old.
Riding
Read the instruction first to know the product performance first.
Don’t lend it to someone who is not familiar with it.
Wear a helmet when riding. Obey the traffic rules and don’t ride it in the cars road.Don’t riding it in the crowded
road.
When go downhill or slippery road, the speed should be under 15km/h.
Inspect the Tyre before riding, Tyre pressure should be 35-45PSI.
Don’t over impact the motor, keep the axile smooth.
Don’t over load.(Max load is 120kg)
Please be careful of the adding distance when it under the rainy day and snow day.
Single-handed ride is prohibited.
Maintenance
The E-bike front and back wheel should be at the center of the frame.
Put the E-bike up after riding at cool and dry place.
Check the Motor and Brake often, don't inject the oil onto the brake.
Check the E-bike and screws and places that need fixing, fix it often.
Suggested torsion: Bar screws 60-80 kgf.cm, bar stand screws 175-200kgf.cm, wheel screws 320-450kgf.cm.
Check the Tyre is pierced and leaks air, please contact professional technician for repairing and replacing.
Responsibility announcement
All the product model, type and related information copy right and explain right are reserved.
This instruction is suitable for denoted models.
Any changing or replace part of the E-bike will not be informed again.
No copy, modification, propaganda or publication before getting the permission form F-wheel.
Read the instructions and follow the instructions or the user will be responsible for the damage.
F-wheel won’t be responsible for injuries, casualties and possession damages.
For more information please visit: www.ebke.eu.
CAUTION