EbV heatcon! EM 101 Manual

Short instruction Extension module
heatcon! EM 101
0450000605-1915
GB
Short instruction Extension module heatcon! EM 101

S. 2 0450000605-1915_KBA_heatcon!EM101_EbV_EN_Druck.docx
EN Syfety instructions
WARNING
Danger due to live parts.
Some components are electrically live. Contact with live parts can result in an electric shock, burns or even death. Before
working on the electrical system, observe the following points:
Switch the system to a zero volts state. Secure to prevent switching back on. Check for zero volts state.

0450000605-1915_KBA_heatcon!EM101_EbV_EN_Druck.docx S. 3
The heatcon! EM is an expansion for the inputs and outputs of a heatcon! EC inside the system, as shown in the technical data.
Technische Daten
Installation
Wall mounting
Outlets
EbV - Device bus
Connection technology
4-wire technology, screw terminal connection
Maximal zulässige Kabellänge
50 m
Power supply
230 V ±10 %, 50 Hz
Power consumption
max. 9VA
IP class
IP 30
IP rating
IP00
Fusing
User-supplied
Ambient conditions
•Storage temperature
•Operating temperature
-25 ... +60 °C
-10 ... +50 °C
Connections screw terminals
•Mains voltage L, N
•1 x potential-free relay ARSP, max. 230V / 2A
•3 x relay 230V ARS, max. 2A, sum current: max.
10A
•2 x sensor pulse input EFI
•2 x sensor pulse 0…10V input EFI 10V
•2 x output 0..10V-PWM A10VP
•2 x EbV –device bus
Standards
DIN EN 60730
Dimensions
145,5 x161 x 48 mm (Länge x Breite x Tiefe)
Weight
405 g
Colour
white

S. 4 0450000605-1915_KBA_heatcon!EM101_EbV_EN_Druck.docx
More information you will find:
https://ebv-gmbh.eu/downloads/
EN –Warranty conditions
Improper use, non-observation of these instructions, use of inadequately qualified personnel and independent changes exclude
any liability on the part of the manufacturer for the resulting damage. The manufacturer's warranty becomes void.
Impairment of device function if incorrect spare parts are used!
If unauthorised parts are used correct functioning is not assured. Use spare parts authorised by customer service.
EN–Declaration of Conformity
EbV Elektronikbau- und Vertriebs-GmbH assures that the product is produced according to valid EU regulations. A complete
version of the Declaration of Conformity can be found in the installation manual at https://ebv-gmbh.eu/downloads/
Copyright
Copyright by
EbV
Elektronikbau- und Vertriebs-GmbH
Heisterner Weg 8-12
D-57299 Burbach
Federal Republic of Germany