Ebyte TX4G-PCB-6613 User manual

Chengdu Ebyte Electronic Technology Co., Ltd TX170-BLG-120 User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd
1
TX4G-PCB-6613 User Manual
4G/LTE PCB Built-in Antenna IPEX-Ⅰ Interface

Chengdu Ebyte Electronic Technology Co., Ltd TX4G-PCB-6613 User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd
3
Contents
Disclaimer..................................................................................................................................................... 4
1 Introduction................................................................................................................................................ 5
2 Parameters.................................................................................................................................................. 5
3 Antenna features.........................................................................................................................................6
4 FAQ............................................................................................................................................................7
About us........................................................................................................................................................ 7

Chengdu Ebyte Electronic Technology Co., Ltd TX4G-PCB-6613 User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd
4
Disclaimer
EBYTE reserves all rights to this document and the information contained herein.
Products, names, logos and designs described herein may in whole or in part be
subject to intellectual property rights.
Reproduction, use, modification or disclosure to third parties of this document or
any part thereof without the express permission of EBYTE is strictly prohibited.
The information contained herein is provided “as is” and EBYTE assumes no
liability for the use of the information. No warranty, either express or implied, is given,
including but not limited, with respect to the accuracy, correctness, reliability and
fitness for a particular purpose of the information. This document may be revised by
EBYTE at any time. For most recent documents, visit www.ebyte.com.

Chengdu Ebyte Electronic Technology Co., Ltd TX4G-PCB-6613 User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd
5
1 Introduction
TX4G-PCB-6613 is a 4G/LTE frequency band PCB built-in antenna, size 66mm×13mm, IPEX-I
interface, suitable for various 4G/LTE frequency equipment (mobile phone, SIM card, router)、wireless
module，withsmallsize, canbe buildedinthemodule, thesignalisstable.
2 Parameters
Electrical parameters
Frequency
4G/LTE
800-960MHz;1710-2700MHz
Antenna gain
5dBi
Voltage standing wave ratio
≤1.5
Polarization direction
Linear polarization
Radiation direction
Omnidirectional
Input resistance
50Ω
Power capacity
5W
Other parameters
Product size
66mm×13mm
Weight
2g
Feeder material
RF1.13
Length of the feeder
150mm（customizable）
Antenna material
PCB
Interface
IPEX-1
Operating temp.
-40℃～+85℃
Storage temp.
-40℃～+85℃

Chengdu Ebyte Electronic Technology Co., Ltd TX4G-PCB-6613 User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd
6
3 Antenna features
VSWR
Smith chart

Chengdu Ebyte Electronic Technology Co., Ltd TX4G-PCB-6613 User Manual
Copyright ©2012–2021, Chengdu Ebyte Electronic Technology Co., Ltd
7
4 FAQ
The antenna frequency must match the frequency of the wireless device, otherwise the communication effect will be
poor;
The lower the communication frequency and the longer the wavelength, the better the diffraction performance;
When there is a straight-line communication obstacle, the communication distance will be attenuated accordingly;
Please pay attention to the antenna radiation direction, the incorrect installation direction of the antenna leads to a
short transmission distance;
The ground absorbs radio waves, and the test result near the ground is poor. It is recommended to increase the
height;
Sea water has a strong ability to absorb radio waves, so the seaside test results are not good;
If there is a metal object near the antenna or placed in a metal shell, the signal attenuation will be very serious;
The poor impedance matching between the antenna and the communication device will lead to poor communication
effects.
About us
Technical support: [e-mail]
Documents and RF Setting download link: www.ebyte.com
Thank you for using Ebyte products! Please contact us with any questions or suggestions: [email protected]
-------------------------------------------------------------------------------------------------
Phone: [phone]
Web: www.ebyte.com
Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China