Ebyte TXWF-XPL-150 User manual

2.4G/5.8G/WiFi suction cup antenna
SMA-J interface (SMA female thread inner needle)
TXWF-XPL-150 Antenna User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
TXWF-XPL-150 User Manual
Copyright ©2012–2020，成都亿佰特电子科技有限公司
.
1
Electrical parameters
bandwidth
2.4-2.5；5.15-
5.85GHz
Gain
4/6dBi
Voltage
standing wave
ratio
≤1.5
Polarization
direction
Vertical
polarization
Radiation
direction
Omnidirectional
input
resistance
50Ω
Power Capacity
50W
Other parameters
Product Size
196mm
Suction cup
diameter
30mm
weight
39g
material
Carbon steel,ABS
Feeder length
1.5M
（customizable）
Feeder material
RG174
Interface
method
SMA-J（SMA
internal thread
internal needle）
Operating
temperature
-40℃～+85℃
Storage
temperature
-40℃～+85℃
Chapter 1 Product Introduction
TXWF-XPL-150 is a 2.4G/5.8G/WiFi dual-band suction cup antenna. The overall height of the antenna is about 196mm, SMA-J interface
(SMA internal threaded inner needle), top induction, with a strong magnetic base, which can be adsorbed on the metal surface and is not easy to fall
off; suitable for wireless modules, data transmission radio stations, car platforms, etc. A 2.4G/5.8G/WiFi dual-band wireless device.
Chapter 2 Specifications

Chengdu Ebyte Electronic Technology Co.,Ltd.
TXWF-XPL-150 User Manual
Copyright ©2012–2020，成都亿佰特电子科技有限公司
.
2
Chapter 3 Antenna Characteristics
Voltage standing wave ratio（VSWR）
Smith chart

Chengdu Ebyte Electronic Technology Co.,Ltd.
TXWF-XPL-150 User Manual
Copyright ©2012–2020，成都亿佰特电子科技有限公司
.
3
Chapter 4 FAQ
The antenna frequency must match the frequency of the wireless device, otherwise the communication effect will be poor；
The lower the communication frequency and the longer the wavelength, the better the diffraction performance；
When there is a straight line communication obstacle, the communication distance will be attenuated accordingly；
Please pay attention to the antenna radiation direction, the antenna installation direction is incorrect, resulting in a short transmission distance；
The ground absorbs radio waves, and the test results near the ground are poor. It is recommended to increase the height；
Sea water has a strong ability to absorb radio waves, so the seaside test results are not good；
If there is a metal object near the antenna or placed in a metal shell, the signal attenuation will be very serious；
Poor impedance matching between antenna and communication equipment will lead to poor communication effect。
About us
Technical support: [e-mail]
Documents and RF Setting download link: www.ebyte.com
Thank you for using Ebyte products! Please contact us with any questions or suggestions: [e-mail]
-------------------------------------------------------------------------------------------------
Phone: [phone]
Web: www.ebyte.com
Address: B5 Mould Park, 199# Xiqu Ave, High-tech District, Sichuan, China