Echelon Lumewave EW-205 Manual

Blue
Red
Black
1. Pull the 3 motion sensor
wires through the spacer
and mounting bracket.
(Figure 1.)
2. Secure mounting bracket
to spacer and motion sensor
with 2 washers and 2 nuts
as shown.
MOTION SENSOR INSTALL MANUAL
MODEL: EW-205-12-LU
Motion
Sensor
Spacer
Mounting
Bracket
Figure 1.
Figure 2
Blue
Red
Black
1. Drill hole into light pole
between 8’ and 10’ from
ground.
(Figure 2.)
2. Connect light fixture and
motion sensor with CAT 5
cable. See wiring diagram
below.
3. Secure motion sensor to
pole with band clamp.
(Figure 3.)
Figure 3
8’-10’
Light
Fixture
CAT 5
Cable
Motion
Sensor
Wiring Diagram
Mounting to Pole
Mounting to Pole
Motion Sensor Assembly
Motion Sensor Assembly
www.echelon.com
MOTION SENSOR INSTALL MANUAL
MODEL: EW-205