Echo GT-201 User manual

Grass Trimmer
Operator'sManual
MODELS GT-201
SerialNumber002001001&Up
WARNING DANGER
X7702272300 X770000170
06/00
WARNING
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
Readrulesforsafeoperationandinstructionscarefully. ECHOprovidesanOperator's
ManualandaSafetyManual. Bothmustbereadandunderstoodforproperandsafe
operation.

2
INTRODUCTION
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job-
dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will
find both easy to use and full of helpful operations tips and SAFETY messages.
WARNING DANGER
Readrulesforsafeoperationandinstructionscarefully. ECHOprovidesanOperator'sManualanda
SafetyManual. Bothmustbereadandunderstoodforproperandsafeoperation.
CopyRight©2000ByEcho,Incorporated
All Rights Reserved.
- Stopping Engine .................................................... 18
Maintenance ................................................................. 18
- SkillLevel ............................................................... 18
- Maintenance Intervals ........................................... 19
- Airfilter .................................................................. 20
- Fuelfilter ................................................................ 20
- Spark plug .............................................................. 21
- Cooling System ...................................................... 21
- Exhaust System ...................................................... 22
- Carburetor Adjustment........................................... 23
- Lubrication ............................................................. 24
- NylonLineReplacement ........................................ 24
Troubleshooting ........................................................... 26
Storage.......................................................................... 27
ServicingInformation.................................................... 28
- Parts....................................................................... 28
- Service ................................................................... 28
- ECHOConsumerProductSupport......................... 28
- Warranty Card ....................................................... 28
- Additional or Replacement Manuals ..................... 28
- Ordering Instructions for Manuals ........................ 28
Specifications, descriptions and illustrative material in this
literature are as accurate as known at the time of publication,
but are subject to change without notice. Illustrations may
include optional equipment and accessories, and may not
include all standard equipment.
THE OPERATOR'SMANUAL
contains specifications and information for operation, starting,
stopping, maintenance, storage and assembly specific to this product.
THE SAFETY MANUAL
explains possible hazards involved with the use of Grass Trimmers and
Brush cutters and what measures you should take to make their use
safer.
TABLE OF CONTENTS
Introduction .................................................................... 2
Manual Safety Symbols and Important Information .......... 3
Safety .............................................................................. 3
- Decals ...................................................................... 3
- InternationalSymbols .............................................. 4
- Equipment ................................................................ 4
- Fuel .......................................................................... 5
- Personal Conditions and Safety Equipment ............ 6
- SafeOperation ......................................................... 7
- ExtendedOperation/ExtremeConditions ................. 8
Description ..................................................................... 9
- EmissionControl...................................................... 9
- Contents List ........................................................... 9
Specifications................................................................ 12
Assembly ...................................................................... 13
- PlasticShield.......................................................... 13
- Nylon Head............................................................ 13
- Front(Loop)Handle .............................................. 13
Pre-Operation ................................................................ 14
- Fuel ........................................................................ 14
- EquipmentCheck ................................................... 15
- DetermineOperationArea ..................................... 16
Operation ...................................................................... 16
- StartingColdEngine .............................................. 16
- StartingWarmEngine............................................ 17

G RASS T RIMMER
O PERATOR ' S M ANUAL
3
MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION
SAFETY
DECALS
Locate these safety decals on your unit. The complete unit illustration found in the "DESCRIPTION" section, will help
you locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a
decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific
information.
A.DRIVESHAFT
Throughout this manual and on the product itself, you will find safety
alerts and helpful, information messages preceded by symbols or key
words. The following is an explanation of those symbols and key words
and what they mean to you.
This symbol accompanied by the words
WARNING and DANGER calls attention to an
act or condition that can lead to serious personal
injury to operator and bystanders.
The circle with the slash symbol means whatever is
shown within the circle is prohibited.
IMPORTANT Theenclosedmessage
provides information necessary for the
protection of the unit.
NOTE This enclosed message provides tips
for use, care and maintenance of the unit.
IMPORTANT
NOTE
B.SPANISHDECAL
ENGLISHTRANSLATION
•Thisunitcanbedangerousandcauseseriousinjuryifimproperlyused. •Operators,helpersandbystanderscanbeseverely
injuredbythrownobjectsandmustwearspecifiedANSIZ87.1eyeprotection.Blindnessorlossofeyecanoccur.Donotrely
oncutterheadshieldtoprotecteyes.Ricochetcanoccur.•toavoidaccidentalcontact,keepeveryonebeyondoperatingarea.
•Toreducetheriskofinjurytooperator,helpers&bystanders,readandunderstandyouroperator'sandsafetymanuals.For
afreecopyofthesafetyManual,writetoECHO,INCORPORATED,400OakwoodRoad,LakeZurich,IL60047.•Keepshield
andothercomponentsinplaceandingoodcondition.DonotuseattachmentsorotherpartsnotapprovedbyECHO.GTstyle
(non-bladecapable)unitsmustnotbeconvertedtobladeuseexceptMaxi-CutsorsimilarECHOapprovedattachments.
WARNING DANGER
Esta unidad puede ser peligrosa y producir
lesiones personales graves si no se usa en
forma adecuada. Para reducir el riesgo de
lesionarse, los operadores, los ayudantes y los
espectadores deben leer y comprender el
Manual Del Operador y los Manuales De
Seguridad que se entregan escritos en español.
ADVERTENCIA PELIGRO
890228-09560
This unit can be dangerous and cause serious
injury if improperly used. To reduce injury
risk to operator, helpers and bystanders, read
and understand the Operator's and Safety
Manuals, which are provided in Spanish.
WARNING DANGER
C.SHIELDDECAL

4
WEAR HAND AND
FOOT PROTECTION
KEEP BYSTANDERS AND HELPERS
AWAY 15 M (50 FT.). DO NOT USE
BLADES. STRING
LINE ONLY
DO NOT EXCEED
10,000 RPM.
DO NOT OPERATE
WITHOUT
GUARDS AND
SHIELDS IN
PLACE.
BEWARE
- THROWN,
RICOCHET
OBJECTS
INTERNATIONAL SYMBOLS
EQUIPMENT
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
• Inspect shield for damage and ensure that the cut-off knife issecurely
in place. Replace if either is damaged or missing.
• Check that the cutting attachment is firmly attached and in safe
operating condition.
• Check that front (loop) handle and/or optional shoulder harness are
adjusted for safe, comfortable operation. See Assembly for proper
adjustment.
• Have repairs done only by an authorized ECHO Service Dealer.
• Do not use any attachment, accessory or replacement part unless it is
recommended in the Operator's Manual.
SYMBOL
DESCRIPTION/APPLICATION SYMBOL FORM/
SHAPE SYMBOL
DESCRIPTION/APPLICATION
SYMBOL FORM/
SHAPE
HOT
SURFACE
CARBURETOR
ADJUSTMENT
- IDLE SPEED
CARBURETOR
ADJUSTMENT
- HIGH SPEED
MIXTURE
SYMBOL
DESCRIPTION/APPLICATION SYMBOL FORM/
SHAPE SYMBOL
DESCRIPTION/APPLICATION
SYMBOL FORM/
SHAPE
Read and understand
Operator's Manual.
WEAR EYES, EARS
AND HEAD
PROTECTION
EMERGENCY STOP
FUEL AND OIL
MIXTURE
FINGER SEVERING
CARBURETOR
ADJUSTMENT
- LOW SPEED
MIXTURE
SAFETY/ALERT
DO NOT SMOKE
NEAR FUEL.
DO NOT ALLOW
FLAMES OR
SPARKS NEAR
FUEL.
WEAR SLIP
RESISTANT
FOOT WEAR.
Engine choke
control. IGNITION
ON/OFF
PRIMER
BULB

G RASS T RIMMER
O PERATOR ' S M ANUAL
5
Spark Arrestor - Catalytic Muffler/Muffler
• The muffler or catalytic muffler controls the exhaust noise and
emissions. The spark arrestor screen prevents hot, glowing particles
of carbon from leaving the muffler. Make sure the spark arrestor
screen is in good repair and properly seated in the muffler. Keep
exhaust area clear of flammable debris. Avoid contact during and
immediatelyafteroperation.
FUEL
WARNING DANGER
FuelisVERYflammable.Useextremecarewhenmixing,storingor
handling, otherwise serious personal injury may result.
• Use an approved fuel container.
• DONOTsmokenearfuel.
• DONOTallowflamesorsparksnearfuel.
• Fuel tanks/cans may be under pressure. Always loosen fuel caps
slowlyallowing pressure to equalize.
• NEVERrefuelaunitwhentheengineisHOT!
• NEVERrefuelaunitwiththeenginerunning.
• DONOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors
over bare ground.
• Securely tighten fuel cap after refueling.
• Inspect for fuel leakage. If fuel leakage is found, do not start or
operate unit until leakage is repaired.
IMPORTANT
Spilled fuel is a leading cause of hydrocarbon emissions. Some
states may require the use of automatic fuel shut-off containers to
reducefuel spillage. Contact your ECHO dealer forordering
information.
After Refueling;
• Wipe any spilled fuel from the unit.
• Move at least 3 M (10 ft.) from refueling location before starting.
After Use;
• DO NOT store a unit with fuel in its tank. Leaks can occur. Return
unused fuel to an approved fuel storage container. 3M (10 FT.)

6
PERSONAL CONDITION AND SAFETY EQUIPMENT
WARNING DANGER
Trimmer/Brush Cutter users risk injury to themselves and others if the trimmer/brush cutter is used improperly and or
safety precautions are not followed. Proper clothing and safety gear must be worn when operating a trimmer.
Physical Condition --
Your judgment and physical dexterity may not be good:
• if you are tired or sick,
•if you are taking medication,
• if you have taken alcohol or drugs.
Operate unit only if you are physically and mentally well.
Eye Protection --
Wear eye protection that meets ANSI Z87.1 or CE requirements
whenever you operate the trimmer.
Hand Protection --
Wear no-slip, heavy duty work gloves to improve your grip on the
Trimmer/Brush Cutter handles. Gloves also reduce the transmission of
machine vibration to your hands.
Hearing Protection --
ECHO recommends wearing hearing protection whenever unit is used.
Proper Clothing --
Wear snug fitting, durable clothing;
• Pants should have long legs, shirts with long sleeves.
• DONOTWEARSHORTS,
• DONOTWEARTIES,SCARVES,JEWELRY.
Wear sturdy work shoes with non-skid soles;
• DONOTWEAROPENTOEDSHOES,
• DONOTOPERATEUNITBAREFOOTED.
Hot Humid Weather --
Heavy protective clothing can increase operator fatigue which may lead
to heat stroke. Schedule heavy work for early morning or late afternoon
hours when temperatures are cooler.

G RASS T RIMMER
O PERATOR ' S M ANUAL
7
SAFE OPERATION
Determine Operation Area
• Provide all operators of this equipment with the Operator's Manual
and instructions for safe operation.
• Review the area to be trimmed. Look for hazards that could contribute
to unsafe conditions.
• Spectators and fellow workers must be warned, and children and
animalspreventedfromcomingnearerthan15M(50ft.)while
thetrimmeris in use.
Operation
UseProperClothing&Equipment
• Before starting the unit, equip yourself and any other person
workingwithin the15M (50 ft.) Safety Zone with the required
Protective Equipment and clothing.
WARNING DANGER
Do not operate this product indoors or in inadequately ventilated
areas. Engine exhaust contains poisonous emissions and can cause
serious injury or death.
AvoidHotSurfaces
• During operation, the complete unit, especially the exhaust area and
the bearing housing may become very hot. Avoid contact during and
immediatelyafter operation. Always keep exhaust area clearof
flammabledebris. Allow the engine and muffler to completely cool
before performing any maintenance activity.
KeepAFirmGrip
• Hold the front and rear handles with both hands with thumbs and
fingers encircling the handles
KeepASolidStance
• Maintain footing and balance at all times. Do not stand on slippery,
uneven or unstable surfaces. Do not work in odd positions or on
ladders. Do not over reach.
15M (50 FT.)

8
EXTENDED OPERATION/EXTREME CONDITIONS
Vibration and Cold --
It is believed that a condition called Raynaud’s Phenomenon, which
affects the fingers of certain individuals may be brought about by
exposure to vibration and cold. Exposure to vibration and cold may
cause tingling and burning sensations followed by loss of color and
numbness in the fingers. The following precautions are strongly
recommendedbecausethe minimum exposure whichmight trigger the
ailmentisunknown.
• Keep your body warm, especially the head, neck, feet, ankles, hands
and wrists.
• Maintain good blood circulation by performing vigorous arm exer-
cises during frequent work breaks and also by not smoking.
• Limit the hours of operation. Try to fill each day with jobs where
operating the trimmer or other hand-held power equipment is not
required.
• If you experience discomfort, redness and swelling of the fingers
followed by whitening and loss of feeling, consult your physician
before further exposing yourself to cold and vibration.
Repetitive Stress Injuries --
It is believed that overusing the muscles and tendons of the fingers,
hands, arms and shoulders may cause soreness, swelling, numbness,
weakness and extreme pain in those areas. Certain repetitive hand
activities may put you at a high risk for developing a Repetitive Stress
Injury(RSI).AnextremeRSIconditionisCarpalTunnelSyndrome
(CTS), which could occur when your wrist swells and squeezes a vital
nerve that runs through the area. Some believe that prolonged exposure
to vibration may contribute to CTS. CTS can cause severe pain for
months or even years. To reduce the risk of RSI/CTS, do the following:
• Avoid using your wrist in a bent, extended or twisted position.
Instead try to maintain a straight wrist position. Also, when grasping,
use your whole hand, not just the thumb and index finger.
• Take periodic breaks to minimize repetition and rest your hands.
• Reduce the speed and force in which you do the repetitive movement.
• Do exercises to strengthen the hand and arm muscles.
• Immediately stop using all power equipment and consult a doctor if
you feel tingling, numbness or pain in the fingers, hands, wrists or
arms. The sooner RSI/CTS is diagnosed, the more likely permanent
nerve and muscle damage can be prevented.

G RASS T RIMMER
O PERATOR ' S M ANUAL
9
IMPORTANTENGINEINFORMATION
ENGINE FAMILY: YEHXS.0214CA
DISPLACEMENT: 21.2 CC
THIS ENGINE MEETS U.S. EPA PH1 AND 2000 AND
LATER CALIFORNIA EMISSION REGULATIONS FOR
S.O.R.E. REFER TO OWNER'S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
DESCRIPTION
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
shield installation and positioning of the front handle are necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
AnEmission Control Label is located on the engine. (This is an
EXAMPLEONLY,informationonlabelvariesbyengineFAMILY).
EMISSION CONTROL
California Tier 2
The emission control system for these engines are
EM(EngineModification).
AIRINDEXTAG
TheAirIndexTagindicates,for
purposesofconsumerawareness,how
thisproduct'semissionscompareto
thestandardsenactedbytheCalifornia
AirResourcesBoard.
PRODUCT EMISSION DURABILITY
The300houremissiondurabilityperiodisthetimespanselectedbythemanufacturercertifyingtheengine
emissionsoutputmeetsapplicableCaliforniaemissionsregulations,providedthatapprovedmaintenanceproce-
duresarefollowedaslistedintheMaintenanceSectionofthismanual.
CONTENTS
____ 1 - TrimmerAssembly
____ - PowerHead
____ - Drive Shaft Assembly
____ 1 - PlasticBag(Co-Pack)
____ - Operator's Manual
____ - Safety Manual
____ - Shield Assembly
____ - NylonTrimmerHead
____ - HardwareBag
____ -1,1/4-20bolt
____ -1,1/4-20wingnut
____ -1,1/4-20flatwasher
____ -WarrantyCard & LimitedWarranty
____ -Safety Glasses
____ -Oil2Stroke

10
3
4
5
6
7
8
910
12
13
14
15
16
17
18
19
20
21
22
11
12

G RASS T RIMMER
O PERATOR ' S M ANUAL
11
1. OPERATOR'SMANUAL- Included inplasticbag (co-pack). Read beforeoperation and keep ina safe place for
future reference, i.e., operation, maintenance, storage and specifications.
2. SAFETYMANUAL- Included in plasticbag (co-pack). Read beforeoperationand keep inasafe place for future
reference to learn proper, safe operating techniques.
3. POWERHEAD -Factory Assembled to the Drive Shaft assembly. Includes the Engine, Clutch, Fuel System,
IgnitionSystem and Recoil Starter.
4. FRONT HANDLE - The Front (loop) handle is factory assembled to the Drive Shaft assembly but must be reposi-
tioned for proper cutting attitude and operator comfort.
5. Drive ShaftASSEMBLY - Factory Assembled to the Power Head. Includes the Rear (right hand) Handle Assembly,
Bearing Housing Assembly, Throttle Trigger, Front (loop, left hand) Handle Assembly, Flexible Drive Cable and
SafetyDecals.
6. NYLONCUTTERHEAD-Containsreplaceablenylontrimminglinethatadvanceswhenthetrimmerheadistapped
against the ground while the head is turning at normal operating speed.
7. DEBRISSHIELDASSEMBLY-Includedinplasticbag (co-pack). MUSTbe installedonunitbeforeuse,see
Assembly Instructions. Shield assembly includes the Cut-Off Knife and Safety Decal. Mounts on the Bearing
Housing Assembly just above the cutting attachment. Helps protect the operator by deflecting debris produced
duringthetrimmingoperation.
8. CUT-OFFKNIFE-Trimslinetothecorrectlength(5").Iftrimmerisoperatedwithoutacut-offknifethelinewill
become too long - more than (5") - the operating speed will slow, the engine overheat and performance will suffer.
9. THROTTLETRIGGER-Springloadedtoreturntoidlewhenreleased. Duringacceleration,presstriggergradually
for best operating technique.
10. GRIP-Rear(righthand)handle.
11. STOPSWITCH-"TOGGLESWITCH"mountedontheengine.MoveswitchUPtoRUN,DOWNtoSTOP.
12. SHOULDER HARNESS - Optional. An adjustable strap that suspends the unit from the operator.
13. ARM REST - Provides arm rest during operation and protects arm from hot engine.
14. SPARKARRESTOR-CATALYTICMUFFLER/MUFFLER-Themufflerorcatalyticmufflercontrolsexhaustnoise
and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep
exhaustareaclearofflammabledebris.
15. FUELTANK-Containsfuelandfuelfilter.
16. RECOILSTARTERHANDLE-Pullhandleslowlyuntilrecoilstarterengages,thenquicklyandfirmly. Whenengine
starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.
17. FUELTANKCAP-Coverandsealsfueltankopening.
18. PRIMERBULB-Pumpingprimerbulb beforestartingenginedrawsfresh fuelfromthefueltank primingthecarbure-
tor for starting. Pump primer bulb until fuel will be visible and flows freely in the clear fuel tank return line. Pump bulb
an additional 4 or 5 times.
19. AIRCLEANER-Containsreplaceablefilterelement.
20. CHOKE - Located above the air cleaner housing. Move lever to “Cold Start” to close choke for cold starting. Move
lever to “Run” ostion to open choke.
21. SPARKPLUG-Providessparktoignitefuelmixture.
22. SAFETYVIDEO-(Notincludedwithunit)P/N99922202540Englishversiononlyisavailableatacostof$5.00from
ECHO, INC. or any authorized ECHO dealer. The video overviews safety precautions and proper operating tech-
niques and is supplemental to the Safety Manual. Read and understand the Safety Manual for complete information
on safe operation.

12
SPECIFICATIONS
MODEL GT-201
Length 1400 mm (55.1 in.)
Width 310 mm (12.2 in.)
Height 385 mm (15.2 in.)
Weight (dry) w/Cutter Head 4.35 kg (9.6 lb.)
Engine Type Air cooled, two-stroke, single cylinder gasoline engine
Bore 32.2 mm (1.268 in.)
Stroke 26.0 mm (1.02 in.)
Displacement 21.2 cc (1.29 cu. in.)
Exhaust Spark Arrestor Muffler w/catalyst
Carburetor Zama diaphragm model w/purge
Ignition System Flywheel magneto, capacitor discharge
Spark Plug NGK BPM-7Y (0.65 mm (0.026 in.)
Fuel Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio 50:1 ECHO High Performance, two-stroke air cooled engine oil
Gasoline 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil 50:1 ECHO High Performance, two-stroke air cooled engine oil
Fuel Tank Capacity 0.45 lit. (15.2 US fl. oz.)
Recoil Starter System Automatic Recoil Starter
Clutch Centrifugal Type
Drive Shaft 1/4" Flex Shaft
Rotating Direction Clockwise viewed from top
Cutter Head Nylon line head (2-Line) with .080 in. line capacity 6.5 m (20 ft.)
Front Handle Left - D-Loop, Right - Grip
Shoulder Harness Optional P/N 99944200201
Idle Speed (RPM) 2400 - 3200
Wide Open Throttle Speed with
Trimmer Head 6800 - 7500

G RASS T RIMMER
O PERATOR ' S M ANUAL
13
ASSEMBLY
Tools Required: Locking Tool (not included). (Use 1/8 in. diameter or
lessmetalbarorsmallscrewdriver.)
PLASTICSHIELD
1. Snap the shield over the bearing housing.
2. Install bolt (A), washer (B) and wing nut (C).
NYLON LINE HEAD
1. Align locking hole in upper plate with hole in bearing housing.
2. Insert 1/8" dia. locking tool (D) (not included with unit) and remove
plastic retaining sleeve. Thread cutting attachment onto PTO shaft
clockwise until head is tight.
IMPORTANT
Remembertoremovethelockingtool.
FRONT (LOOP) HANDLE
NOTE
Front handle is pre-installed. Repositioning and tightening is all
that is required.
1. Position front handle (E) in comfortable operating position and
tighten wing nut (F). The cutting attachment should be 5cm- 7.5cm
(2 in. -3 in.) above the ground and as level as possible.
A
B
C
D
E
F

14
PRE - OPERATION
FUEL
Fuel Requirements
Gasoline - Use 89 Octane [ ] (mid grade or higher) gasoline or
gasohol known to be good quality. Gasohol may contain up to 10%
Ethyl(grain)alcoholor15%MTBE(methyltertiary-butylether).
Gasohol containing methyl (wood) alcohol is NOT approved.
TwoStrokeOil-Atwo-strokeengineoilmeetingISO-L-EGD (ISO/CD
13738)andJASO FC standards, mustbe used. Echo brandPremium 50:1
oil meets these standards. Engine problems due to inadequate lubrica-
tioncausedby failure to use anISO-L-EGD and JASO FC certifiedoil,
suchasEchoPremium50:1Two-strokeOil,willvoidthetwo-stroke
engine warranty. (Emission related parts only are covered for two
years, regardless of two-stroke oil used, per the statement listed in the
CaliforniaEmissionDefectWarrantyExplanation.)
Mixing- Follow directions on the oil container.
Handling Fuel
WARNING DANGER
FuelisVERYflammable.Useextremecarewhenmixing,storingor
handling, otherwise serious personal injury may result.
• Use an approved fuel container.
• DONOTsmokenearfuel.
• DONOTallowflamesorsparksnearfuel.
• Fuel tanks/cans may be under pressure. Always loosen fuel caps
slowlyallowing pressure to equalize.
• NEVERrefuelaunitwhentheengineisHOT!
• NEVERrefuelaunitwiththeenginerunning.
• DONOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors
over bare ground.
• Securely tighten fuel cap after refueling.
• Inspect for fuel leakage. If fuel leakage is found, do not start or
operate unit until leakage is repaired.
IMPORTANT
Spilled fuel is a leading cause of hydrocarbon emissions. Some
states may require the use of automatic fuel shut-off containers to
reducefuel spillage. Contact your ECHO dealer forordering
information.
R + M
2

G RASS T RIMMER
O PERATOR ' S M ANUAL
15
After refueling;
• Wipe any spilled fuel from the unit.
• Move at least 3 M (10 ft.) from refueling location before starting the
engine.
After use;
• DO NOT store a unit with fuel in its tank. Leaks can occur.
Return unused fuel to an approved fuel storage container.
Storage -
Fuel storage laws vary by locality. Contact your local government for
the laws affecting your area. As a precaution, store fuel in an approved,
air tight container. Store in a well ventilated, unoccupied building, away
from sparks and flames. Do not store fuel longer than 30 days.
IMPORTANT
Stored fuel ages. Do not mix more fuel than you expect to use in
thirty (30) days, ninety (90) days when a fuel stabilizer is added.
IMPORTANT
Stored two-stroke fuel may separate. ALWAYS shake fuel con-
tainer thoroughly before each use.
EQUIPMENT CHECK
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
• Inspect shield for damage and ensure that the cut-off knife is securely
in place. Replace if either is damaged or missing.
• Check that the cutting attachment is firmly attached and in safe
operating condition.
• Check that front (loop) handle and optional shoulder harness are
adjusted for safe, comfortable operation. See Assembly for proper
adjustment.
3M (10 FT.)
SMTWTF S
1234567
8 9 10 1112 13 14
1516 17 1819 20 21
2223 24 2526 27 28
2930 31

16
DETERMINE OPERATION AREA
• Review the area to be trimmed. Look for hazards that could contribute
to unsafe conditions.
• Spectators and fellow workers must be warned, and children and
animalspreventedfromcomingnearer than 15M (50 ft.) whilethe
trimmerisinuse.
OPERATION
• Provide all operators of this equipment with the Operator's Manual
and Instructions for safe use.
• Before starting the unit, equip yourself and any other person working
within the 15M (50 ft.) Safety Zone with the required Protective
Equipment and clothing.
• During operation, the complete unit, especially the exhaust area and
the bearing housing may become very hot, too hot to touch. Avoid
contact during and immediately after operation. Always keep exhaust
areaclearofflammabledebris.
STARTING COLD ENGINE
WARNING DANGER
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1. Stop Switch -Start/Run.
Move stop switch button (A) away from the STOP position.
2. ChokeLever-ColdStart.
Move choke (B) to “Cold Start” Position.
3. Primer-PumpBulb
Pumpprimer bulb (C) until fuel will be visible and flows freelyinthe
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
A
15M (50 FT.)
B
C

G RASS T RIMMER
O PERATOR ' S M ANUAL
17
A
WARNING DANGER
Inspect starting area for hazards such as rocks, glass, debris etc.
which could be thrown by the cutting attachment when starting.
Keep helpers and bystanders at least 15m (50 feet) from starting
area, otherwise serious personal injury may result.
4. Lay the trimmeronaflatclear area. Firmly grasp throttlegripwith
left hand and fully depress throttle trigger to wide open position.
Rapidlypullstarterhandle/rope(D)untilenginefires(maximumfive
[5]pulls).
5. After engine fires or five (5) pulls, move choke lever back to “Run”
position. Hold throttle trigger fully depressed and pull starter
handle/rope until engine starts and runs. Release throttle trigger
and allow unit to warm up at idle for several minutes.
NOTE
If engine does not start with choke in “Run” position after 5 pulls,
repeat instructions.
6. After engine warm up, gradually depress throttle trigger to increase
engine RPM to operating speed.
STARTING WARM ENGINE
WARNING DANGER
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1. Stop Switch - Start/Run. Move stop switch button (A) away from
the STOP position.
2. Start - Pull Rope. Lay the trimmer on a flat clear area and pull
the starter handle (D) until the engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
D
D

18
STOPPING ENGINE
1. Release Throttle. Allow engine to idle for a minute.
2. Stop Switch - Stop. Move stop switch button (A) to STOP
position.
WARNING DANGER
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Haveyour ECHO dealer repair stop switch before using trimmer
again.
NOTE
Refer to the Grass Trimmer / Brush Cutter Safety Manual for proper
and safe trimming techniques.
MAINTENANCE
Your ECHO trimmer is designed to provide many hours of trouble free service. Regular scheduled maintenance will help
your trimmer achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the
ECHO Dealer do it, each maintenance task has been graded. If the task is not listed see your Echo dealer for repairs.
SKILL LEVEL
Level1= Easy to do. Most required tools come with unit.
Level2= Moderatedifficulty. Some specialized tools may be required.
Level3= Experiencerequired.Specializedtoolsarerequired.ECHOrecommends
that the unit be returned to your ECHO dealer for servicing.
ECHO offers REPOWERTM Maintenance Kits and Parts to make your maintenance job easier. Just below each task
heading are listed the various part numbers required for that task. See your ECHO dealer for these parts.
A

G RASS T RIMMER
O PERATOR ' S M ANUAL
19
MAINTENANCE INTERVALS
Component/System Maintenance Procedure Daily or
Before
Use
Every
Refuel
3 Months
or 90
Hours
6 Months
or 270
Hours Yearly
Air Filter Clean / Replace I / C R *
Fuel Strainer Clean / Replace IR
Fuel Line Inspect II I
Carburetor Inspect / Rebuild / Replace I / C R (1)
Choke System Inspect / Clean / Replace I / C I / C
Cooling System Inspect / Clean I / C
Muffler Spark
Arrestor Inspect / Clean I / C
Cylinder Exhaust Port Inspect / Clean / Decarbon I / C
Drive Shaft (Flex
Cable Models) Grease I (2)
Gear Housing Grease I
Starter Rope Inspect / Clean I
Fuel Leaks Inspect / Replace II
Spark Plug Clean / Replace I / C R
Ignition System Clean / Replace No Maintenance required for coil and flywheel
Screws/Nuts/Bolts Inspect /T ighten / Replace I
I = Inspect / R = Replace / C = Clean
Time intervals shown are maximum. Actual use and your experience will determine the frequency of
required maintenance.
(1) Replacement will be required for commercial use yearly. For Consumer use, cleaning every 6 months
is required. Cleaning includes Rebuild Kits.
* All recommendations to replace are based on the finding of damage or wear during inspection.
(2) Grease flexible drive cables every 25 hours and/or on a weekly schedule.

20
AIR FILTER
Level1.
Tools required: Cleaningbrush,25or50mm(1or2in.)mediumbristle
paint brush.
Parts required: 90008REPOWERTM AIR&FUELFILTERKIT.
1. Close choke (Cold Start Position). This prevents dirt from entering the
carburetor throat when the air filter is removed. Brush accumulated dirt
fromtheaircleanerarea.
2. Remove the air cleaner cover. Clean and inspect the element for
damage. If element is fuel soaked and very dirty, replace.
3. If element can be cleaned and reused, be certain it:
-still fits the cavity in the air cleaner cover.
-is installed with the original side out.
NOTE
Carburetor adjustment may be needed after air filter cleaning/
replacement. See Carburetor Adjustment Section.
FUEL FILTER
Level1.
Toolsrequired: Fuellinehook,203-254mm (8-10in.)lengthofwire
with one end bent into a hook. Clean rag, funnel, and an approved fuel
container.
Partsrequired: 90008REPOWERTM AIR&FUELFILTERKIT
WARNING DANGER
FuelisVERYflammable.Useextremecarewhenmixing,storingor
handling.
1. Use a clean rag to remove loose dirt from around fuel cap and
emptyfueltank.
2. Use the “fuel line hook” to pull the fuel line and filter from the tank.
3. Remove thefilter from the lineand install thenew filter.