Ecler VEO-MXH44D User manual
2
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
TABLE OF CONTENTS
1. PRECAUTIONS.............................................................................................................................3
1.1 Important Remark ................................................................................................................... 3
1.2 Important Safety Instructions.............................................................................................. 4
1.3 Cleaning ..................................................................................................................................... 4
2. PACKAGE CONTENTS ...............................................................................................................5
3. DESCRIPTION & FEATURES .................................................................................................... 5
3.1 Main Features ........................................................................................................................... 6
4. INSTALL & CONNECT ................................................................................................................6
5. START-UP & OPERATION........................................................................................................7
5.1 LCD Display control menu ................................................................................................... 7
5.2 Video Switching button Control ......................................................................................... 7
5.3 Video control............................................................................................................................. 8
5.4 Audio Control Interface .......................................................................................................10
5.5 EDID…….....................................................................................................................................11
5.6 Preset………………………………………………………………………………………………………………………..12
5.7 Setup………………………………………………………………………………………………………………………...13
5.8 Information Interface............................................................................................................16
5.9 Remote Controlling ..............................................................................................................17
5.9.1 Series Port Setting..........................................................................................................17
5.9.2 Command List...................................................................................................................17
6. WebGUI........................................................................................................................................19
6.1 Change IP Address of PC ...................................................................................................19
6.2 Login by Browser ..................................................................................................................19
6.3 Video…………………………………………………………………………………………………………………………20
6.4 Audio……………………………………………………………………………………………………………………….. 21
6.5 EDID………………………………………………………………………………………………………………………….22
6.6 Network....................................................................................................................................23
6.7 System…………………………………………………………………………………………………………………….. 24
7. FIRMWARE UPGRADE ............................................................................................................25
8. PANELS & REMOTE FUNCTIONS .........................................................................................26
8.1 Front Panel ..............................................................................................................................26
8.2 Rear Panel ...............................................................................................................................27
8.3 Remote Control......................................................................................................................28
9. TECHNICAL DATA ....................................................................................................................30
9.1 Technical Specifications ......................................................................................................30
9.2 Mechanical Diagram.............................................................................................................31
3
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
1. PRECAUTIONS
1.1 Important Remark
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
WARNING (If applicable): The terminals marked with symbol of “ ” may be of sufficient
magnitude to constitute a risk of electric shock. The external wiring connected to the terminals
requires installation by an instructed person or the use of ready-made leads or cords.
WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
WARNING: A device with Class I construction shall be connected to a mains socket-outlet
with a protective earthing connection.
WARNING: This product must not be discarded, under any circumstance, as
unsorted urban waste. Take to the nearest electrical and electronic waste treatment
centre.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
4
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
1.2 Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this device near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other device (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding type
plug. A polarized plug has two
blades with one wider than the
other. A grounding type plug has
two blades and a third grounding
prong. The wide blade or the third
prong are provided for your safety. If
the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
the plugs, convenience receptacles,
and at the point where they exit
from the device.
11. Only use attachments/accessories
specified by the manufacturer.
12. Unplug the device during lightening
sorts or when unused for long
periods of time.
13. Refer all servicing to qualified
personnel. Servicing is required
when the device has been damaged
in any way, such as power supply
cord or plug is damaged, liquid has
been spilled or objects have fallen
into the device, the device has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
14. Disconnecting from mains: When
switching off the POWER switch, all
the functions and light indicators of
the unit will be stopped, but fully
disconnecting the device from mains
is done by unplugging the power
cable from the mains input socket.
For this reason, it always shall
remain easily accessible.
15. Equipment is connected to a socket-
outlet with earthing connection by
means of a power cord.
16. The marking information is located
at the bottom of the unit.
17. The device shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on device.
1.3 Cleaning
Clean the unit with a soft, dry clean cloth or slightly wet with water and neutral liquid
soap only, then dry it with a clean cloth. Be careful that water never gets into the unit through
any hole. Never use alcohol, benzine, solvents or abrasive substances to clean this unit.
NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused to
people, animal, or objects due to failure to comply with the warnings above.
5
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
Thank you for choosing our device Ecler VEO-MXH44D!
We appreciate your trust.
It is VERY IMPORTANT to carefully read this manual and to fully understand its
contents before any connection in order to maximize your use and get the best
performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its
maintenance be carried out by our authorised Technical Services.
Ecler VEO-MXH44D comes with a 5-year warranty.
2. PACKAGE CONTENTS
•1x VEO-MXH44D.
•1x 12V/2A DC power supply.
•1x Remote control.
•1x IR Ext RX Cable.
•5 x 3 pin Euroblock connector for RS-232 and audio extraction.
•First Steps Guide.
•Warranty card.
3. DESCRIPTION & FEATURES
VEO-MXH44D is a 4x4 HDMI 2.0 matrix that supports up to 4K/UHD video resolution at 60
Hz with 4:4:4 chroma sampling. It features 8 analogue and digital audio de-embedding
outputs, along with EDID management, an LCD display, and an integrated web GUI, providing
a user-friendly configuration and control interface.
HDMI sources can be addressed using the selection buttons on the front panel or through serial
commands, TCP/IP, and IR. The VEO-MXH44D is compliant with HDCP 2.2 and 1.4 standards.
Additionally, the VEO-MXH44D can load and launch up to 8 presets, making it a professional
solution for applications that require routing of video and audio HDMI signals between 4K/UHD
sources and displays, with smart control management.
6
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
3.1 Main Features
•It has 4 HDMI 2.0 inputs that can be independently routed to 4 HDMI 2.0 outputs.
•Supports HDMI 2.0 up to 4K @ 60Hz, YUV 4:4:4 8-bit, HDR (at 4K @ 60Hz YUV 4:2:0 10-
bit).
•Supports Full HD video downscaling.
•Provides storage for 8 presets.
•Supports audio formats, including Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio,
and DTS:X transmissions.
•Allows analogue audio extraction via a stereo unbalanced Euroblock connector, as well as
stereo and surround digital audio extraction via an S/PDIF coaxial connector.
•Supports Audio Return Channel (ARC).
•Control options including front panel and display, IR remote, RS-232 control, IP control,
and WebGUI.
•Features advanced EDID management.
•Compliant with HDCP 2.2.
•Powered by a local 12V DC power supply.
4. INSTALL & CONNECT
7
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
5. START-UP & OPERATION
The unit can be controlled and configured by following the steps indicated below.In
addition, if you prefer, it can also be configured by the WebGUI.
5.1 LCD Display control menu
To operate through the different menus, please use:
•UP/DOWN buttons of the front panel or ▲/▼buttons of the Remote Control to
select the item.
•ENTER button of the front panel to accept or ►button of the Remote Control. The
selected item will be highlighted in white.
MENU button of the front panel to go back or ◄button of the Remote Control.
5.2 Video Switching button Control
The signal switching capability includes 4 switching channels that can be flexibly configured
as input or output channels based on specific requirements, allowing the formation of a 1x4
or 4x4 matrix. This matrix can switch any input signal to either a single channel output or
simultaneously to all channel outputs.
•To select an output channel and input channel combination, or to perform a long press
on an input channel, follow these steps:
1. Press the desired output channel selection.
2. Press the desired input channel that you want to associate with the selected "output
channel".
•To assign an input channel to more than one output channel, follow these steps:
1. Press one by one the output channels that you wish to perform a switch on.
2. Press the desired input channel that you want to associate with the selected output
channels.
•To assign an input channel to all output channels, follow these steps:
1. Long press any output channel.
2. Press the desired input channel that you want to associate with all output channels.
Or
3. Long press the desired input channel that you want to assign to all the output
channel.
8
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
Examples:
•Switch output 1 to input 4
Operation: press output1 and then input4 to complete switch
•Output 2, 1, 3 switch to input 2
Operation: press output 2, 1, 3 and then input 2 to complete switch
•All output switch to input 4
Operation: long press any output 4 and then long press input 4 to complete
switch.
If time between pressings exceeds 10s, it will be necessary to press output button
again.
5.3 Video control
This section allows to operate video features.
A. Switching
1. Select "Video" from the main menu, then press "ENTER".
2. Use the “UP/▲or DOWN/▼”button to choose "Switching".
3. Press "ENTER" to proceed.
4. Use the “UP/▲or DOWN/▼”button to select the desired output (Output1~4 or
All) in the main menu. The selected output will be highlighted in white.
5. Press "ENTER" to enter the next sub-menu.
9
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
6. Use the “UP/▲or DOWN/▼”button to select the desired input. The selected
input will be indicated by a white colour.
7. Press "ENTER" to complete the video switching.
B. On/Off
Video signal can be switched on and off on any output selected By default, the output
video is set to be active.
1. Select "Video" from the main menu and press "ENTER".
2. Use the “UP/▲or DOWN/▼”button to choose "On/Off."
3. Press "ENTER" to access the sub-menu.
4. Use the “UP/▲or DOWN/▼”button to select the desired output (e.g., "output1-
4" or "All"). The selected output will be highlighted in white.
5. Press "ENTER" to enter the next sub-menu.
6. Select the desired output (Output-HDMI1~4) and press "ENTER" to enter the next
sub-menu.
7. Use the “UP/▲or DOWN/▼”button to select either "Off" or "On".
8. Press "ENTER" to confirm and set the output port to open or closed.
10
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
5.4 Audio Control Interface
This section allows to operate and configure audio features.
A. Line Out
This parameter allows to turn on and off the HDMI audio output signal
1. Select "Audio" from the main menu and press "ENTER".
2. Use the “UP/▲or DOWN/▼” buttons to choose "Line out", then press "ENTER".
The selected option will be highlighted in white.
3. Use the “UP/▲or DOWN/▼” buttons to select the desired output (1-4 or All).
Press "ENTER" to choose between "On" and "Off" for that output.
B. De -Embed
This parameter allows to turn on and off the audio extraction.
1. Select "Audio" from the main menu and press "ENTER".
2. Use the “UP/▲or DOWN/▼” button to choose "De-Embed" and press "ENTER".
The selected option will be highlighted in white.
3. Use the “UP/▲or DOWN/▼” button to select the desired output (1-4 or All).
4. Press "ENTER" to toggle between "On" and "Off" for the selected output.
11
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
5.5 EDID
This parameter allows to manage EDID settings.
Default 1:
4K@60Hz 444-LPCM: 2.0, HDR:HLG
Default 2:
4K@60Hz 420-LPCM: 2.0, HDR:None
Default 3:
4K@30Hz 444-LPCM: 2.0, HDR:None
Default 4:
1080p@60Hz 444-LPCM: 2.0, HDR:None
The default EDID is “Default1”:
1. Select “EDID” in main menu and press ”ENTER” button
2. Press “UP/▲or DOWN/▼”button to select “Input 1” (All means all input).
3. Press "ENTER" button to enter the next sub-menu.
4. Press “UP/▲or DOWN/▼”button to select “Default1”, the selected option will be
highlighted in white. Press “ENTER” to complete setting.
5. Behind the selected EDID, it will show the max support resolution, audio format
and audio channel.
12
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
5.6 Preset
This section enables you to perform the following actions related to presets:
•Save: Save the current state of video, audio, EDID, system settings, etc., as a preset. You
can save up to 8 presets.
•Recall: Recall a previously saved preset to restore the saved state of video, audio, EDID,
system settings, etc.
•Delete: Delete a saved preset to free up the preset slot for future use.
These preset functions allow you to save and recall specific video, audio, EDID settings
or configurations, to effectively manage and customize your own settings.
1. Select "Preset" from the main menu and press "ENTER" to enter the preset
interface.
2. To recall a preset, choose "Call" and select the desired Preset1~8. Press "ENTER"
to confirm.
3. To save the current configuration as a preset, select "Save" and choose one of
the Preset1~8 options. Press "ENTER" to save.
4. To clear a preset and restore it to the default settings, select "Clear" and choose
the desired Preset1~8. Press "ENTER" to confirm.
13
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
5.7 Setup
This section allows to configure general settings.
A. Baud Rate
This section allows to adjust the serial baud rate.
1. From the main menu, select "Setup" and press "ENTER".
2. Press “UP/▲or DOWN/▼”button to choose "Baud".
3. Press "ENTER" to enter the sub-menu.
4. Press “UP/▲or DOWN/▼”button to select the desired baud rate, such as
"9600".
5. Press "ENTER" to confirm and complete the setting.
14
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
B. DHCP Switch
This section allows to enable DHCP for network configuration.
•DHCP On: dynamic IP address
•DHCP Off: static IP address (by default)
To change the DHCP setting:
1. Select “Setup” in main menu and press ”ENTER” button.
2. Press “UP/▲or DOWN/▼”button to select “DHCP” setting.
3. Press “ENTER” to enter the next sub-menu.
4. Press “UP/▲or DOWN/▼”button to select “On”.
5. Press “ENTER” to open DHCP to allocate IP address automatically.
C. Reboot
This section allows to reboot the device.
1. Select “Setup” in main menu and press ”ENTER” button.
2. Press “UP/▲or DOWN/▼”button to select ”Reboot”.
3. Press “ENTER” to enter the next sub-menu.
4. Press “UP/▲or DOWN/▼”button to select “Yes”.
5. Press “ENTER” to complete reboot device.
15
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
D. Factory
This section allows to perform a factory reset when necessary.
There are two different factory settings:
•Common: factory reset for video switch, EDID, audio and setting (IP address can’t
be factory rest when under “common”).
•All: factory set for video, EDID, audio, setting, preset and device name.
If you perform a factory reset, all user settings will be deleted and restored to
the factory default settings.
1. Select “Setup” in main menu and press ”ENTER” button.
2. Press “UP/▲or DOWN/▼”button to select “Factory".
3. Press “ENTER” to enter the next sub-menu.
4. Press “UP/▲or DOWN/▼”button to select “All” or “Common” and press
“ENTER” button.
5. Press “UP/▲or DOWN/▼”button to select “Yes” and press “ENTER” button.
16
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
5.8 Information Interface
This section allows to consult IP and system information.
•System: company name, device name and version information
•IP: device IP address, MAC address and DHCP status.
1. Select “INFO” in main menu and press ”ENTER” button.
2. Press “UP/▲or DOWN/▼” button to select “System” or “IP”. Selected item will
be highlighted white when selected.
3. Press “ENTER” to enter the next sub-menu, to view the device information.
17
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
5.9 Remote Controlling
VEO-MXH44D can be remotely controlled over RS-232 or TCP/UDP communications
protocol.
•For RS-232 serial communication: enter the selected parameters on Series Port
Setting chapter.
•For TCP/UDP communication: enter the current VEO-MXH44D IP address and Port:
5000 for TCP or 5001 for UDP commands.
5.9.1 Series Port Setting
The serial parameters for a correct transmission are:
Baud rate 115200 (by Default) |Data bits 8 |Stop bits 1 |Parity None |Flow
control None
For a correct communication, both the host PC and VEO-MXH44D need to have the
same baud rate amongst the available options.
5.9.2 Command List
•All commands start with “#”
•“_” the underline cannot be omitted.
•Command head, Parameter and target need to add one “SPACE”.
Command Code
Description
Command Return
#video_d out[x] matrix=[y]
Switches Video Output channel [x] to Input
channel [y]
PARAMETERS DESCRIPTION
•[x]: Output channel number, ranging from 1 to 4. If
[x]=0, all output
•[y]: Input channel number, ranging from 1 to 4
<Ouput[x] : Video Matrix> [Data=[y-1] : Input [y]]
#video_d out[x] onoff=[y]
Turns on and off Output channel [x]
PARAMETERS DESCRIPTION
•[x]: Output channel number, ranging from 1 to 4. If
[x]=0, all output
•[y]:
ON = 1
OFF = 0
<Ouput[x] : Video OnOff> [Data=[y-1] : Input [y]]
18
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
#audio_d out[x] hdmi=[y]
Enables or disables HDMI audio on channel [x]
PARAMETERS DESCRIPTION
•[x]: Output channel number, ranging from 1 to 4. If
[x]=0, all output
•[y]: enable or disable
ON = 1
OFF = 0
<Ouput[x] : Audio HDMI> [Data=[y-1] : Input [y]]
#audio_d out[x] dec=[y]
Enables or disables audio extraction on output
channel [x]
PARAMETERS DESCRIPTION
•[x]: Output channel number, ranging from 1 to 4. If
[x]=0, all output
•[y]: enable or disable
ON = 1
OFF = 0
<Ouput[x] : Audio DEC> [Data=[y-1] : Input [y]]
#preset:[x] exe=[y]
Saves, calls or clears a preset
PARAMETERS DESCRIPTION
•[x]: Output channel number, ranging from 1 to 8. If
[x]=0, all preset
•[y]: saves, calls or clears
Saves = 1
Calls = 0
Clears = 2
Preset: Preset[x] Save / Calls / Clears
#lcd bl_lv:[x]
Increases or decreases LCD display backlight
PARAMETERS DESCRIPTION
•[x]: backlight level, ranging from 0 to 10
New LCD bl lv: [x]
#lcd contrast:[x]
Increases or decreases LCD display contrast
PARAMETERS DESCRIPTION
•[x]: contast level, ranging from 0 to 255
New LCD contrast: [x]
#factory:[x]
Saves, calls or clears a preset
PARAMETERS DESCRIPTION
•[x]:
Operation data = 0
All settings = 1
System reboot…
19
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
6. WebGUI
The unit can be controlled and configured by its own built-in web interface by simply typing
the IP address of the chosen device into a web browser.
6.1 Change IP Address of PC
Before configuring the device through the website, it is necessary to configure the IP
address of your computer to be in the same network segment as the device.
1. Open the Network Control Center on your computer.
2. Find the network connection you are using (Ethernet or Wi-Fi).
3. Right-click on the network connection and select "Properties".
4. Look for "Internet Protocol Version 4 (TCP/IPv4)" or "IPv4" and select it.
5. Choose the option to manually set the IP address.
6. Enter an IP address that is in the same network segment as the device.
7. Set the subnet mask to match the device's network configuration.
8. Leave the default gateway field blank or enter the device's IP address.
9. Save the changes and close the network properties window.
6.2 Login by Browser
To access VEO-MXH44D WEB settings it is necessary to enter the base unit IP address in
an internet browser.
•Default IP address: 192.168.1.168
•Default username: admin
•Default password: 123456
20
PRECAUTIONS
PACKAGE
CONTENTS
DESCRIPTION
&
FEATURES
INSTALL
&
CONNECT
START-UP
&
OPERATION
PANELS & REMOTE
FUNCTIONS
TECHNICAL
DATA
WebGUI
FRIMWARE
UPGRADE
6.3 Video
This section allows to configure video routing and preset management.
•Video Routing
To assign an Input to an Output, first click the destination OUT and then click on the
required IN from the I/O section below.
•Preset management
To recall a preset, press the corresponding preset button (e.g., Preset 1) followed by the
Recall button.
For example: to recall Preset 1, press the Preset 1 button and then press the Recall button.
•To save a preset
oSet up the desired configuration (video, audio, etc.) that you want to save as a preset.
oPress the corresponding preset button (e.g., Preset 2) followed by the Save button.
For example: to save the current configuration as Preset 2, press the Preset 2 button and
then press the Save button.
•To rename input or output ports and presets
oClick on the desired input or output port to select it.
oEnter the new name in the input box provided.
oClick on the "Save & Exit" button to save the new name.
•Renaming presets:
oClick on the desired preset to select it.
oEnter the new name in the input box provided.
oClick on the "Save & Exit" button to save the new name.
Table of contents
Other Ecler Matrix Switcher manuals
