HUB1408 Quick Guide
1. Plug in HUB and download pilot app 3. Power ON the HUB and link with pilot
1. Power ON sound sources
2. Power ON HUB unit
3. Power ON Amplifier
4.Open the Ecler pilot app in
your Smartphone/Tablet and
press “Discover Devices”
Make sure that the HUB unit and your mobile
device are connected to the same Network
4. Select your HUB and pilot panels
1. Select your device (if your device does not appear on the
list, please check the HUB manual to connect it manually)
2. Touch on the Public Pilot Panels button to access
public profile user panels
3. Choose the area you want to control
12
3
1. Plug the HUB to the mains using the power cord
2. Use an Ethernet cable to connect the HUB to the router
3. Download and install the Ecler pilot app in your Tablet/
Smartphone
2
4
12
3
2. Connect inputs and outputs
Amp
Speakers
HUB
Sound
sources
5. Ready to work. PLAY! Predefined Setups
With the pilot panel you will be able to control
volume, EQ and source of every zone.
Load a different configuration in seconds. Check each of the
available settings on the reverse of the sheet.
For advanced setup and control via web browser, please check
the HANGAR user manual. Available @ ecler.com
