Eclipse CD8053 User manual

OWNER'S MANUAL
We appreciate your purchase of this tuner.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
ESN E8 CD Tuner with
Multi Control and NOB Remote
MODEL CD8053
DISC
BAND MODE
MUTE
ILLUMI
PWRE-COM
TRACK
TUNE SEEK
P
U
S
H
-
M
O
D
E
DIVISION OF FUJITSU TEN CORP. OF AMERICA
19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502
[phone]
090001-1441A700
0303 (Y.O)
CUSTOMER NOTICE
Please retain this booklet and write in the serial number of your CD8053 for
identification. The serial number is labeled or stamped on the chassis.
Serial No.

For your safety in using the
CD8053
Warnings and caution signs, illustrated below, are posted
throughout this manual as well as on the CD8053. They show safe
and correct ways to handle the product so as to prevent personal
injury to you and others and avoid damage to property.
Before reading through the manual, take time to read through and
learn the important information listed in this section.
This sign indicates a situation in which
incorrect handling through disregard of a sign
might result in death or serious personal injury.
This sign indicates a situation in which
incorrect handling through disregard of a sign
might result in personal injury or may result
solely in damage to property.
• Do not modify this system for use other than that specified
herein. Also, do not deviate from the installation procedures
described herein; Eclipse will not be held liable for damages
including, but not limited to serious injury, death or property
damage resulting from installations that enable unintended
operation.
• This unit is intended for operation in DC 12-volt, negative-
grounded vehicles only. Never use it in 24-volt vehicles such as
heavy trucks or diesel cars with cold-region specifications.
• Do not change CDs while driving. Doing so may result in an
accident.
Warning
Caution
Warning
2
IMPORTANT
RECORD YOUR “KEY CD”
HERE…
STORE YOUR “KEY CD”
ALONG WITH YOUR
OWNER’S MANUAL IN
YOUR SOCK DRAWER.
131

3
• Do not place the vinyl storage bag over a person. It may cause
a serious accident or death by suffocation.
• Do not adjust the controls while driving the car. To adjust the
controls, stop the car in a safe location.
• To prevent accidents, store batteries for the remote control out
of the reach of small children. In case a child swallows a
battery, consult a physician immediately.
• Do not disassemble or rebuild this product. Doing so may
cause an accident, fire or electrical shock.
• When it is necessary to replace the fuse, always use a fuse of
the correct rating (number of amperes). Use of fuses with
higher amperage ratings may cause a fire.
• Do not operate the product in a malfunctioning condition, for
instance, when the audio does not play. Doing so may result in
an accident, fire or electrical shock.
• If an abnormal situation occurs, such as foreign matter entering
or liquid splashing on the product, or smoke or a strange odor
emitting from the unit, shut off the product immediately and
consult the dealer from whom you purchased it. Continued
operation may cause an accident, fire or electrical shock.
• Do not install this product in locations where it may obstruct the
driver's view, or where it may endanger passengers in the
vehicle. Otherwise, an accident or injury may result.
• Do not install this product in locations where it may interfere
with the operation of the steering wheel, shift lever, brake
pedal, etc. Otherwise, an accident or injury may result.
• When installing this product, never use existing nuts or bolts
that secure parts of the fuel tank, or the steering or braking
systems. Otherwise improper steering or braking or a fire may
result.
Warning

4
• To prevent a short circuit from occurring, disconnect the
battery's negative terminal before installing this product.
Otherwise, an electric shock or injury may result.
• When using an existing nut and/or bolt from the vehicle to
ground this product, do not use any that secure parts of the
steering or braking systems. Otherwise, an accident may result.
• Bundle cables and harnesses with electrical tape or wire ties to
prevent them from interfering with moving parts. If they should
entangle the steering wheel, shift lever or brake pedal, an
accident may result.
• Never supply power to another electrical appliance by splicing
or tapping into this product's power lead (wire). Otherwise, the
current capacity of the wire will be exceeded, resulting in a fire
or electric shock.
• Never attempt to disassemble or modify the product.
Otherwise, an accident, fire or electric shock may result.
• When installing the product into a vehicle with a passenger
side air bag, do not secure it to the air bag's cover or in places
where it may impede air bag deployment. Otherwise, proper air
bag operation may not be ensured in the event of an accident,
causing injury or death.
• When making holes using a drill or similar tool, be sure to wear
protective eyewear. Otherwise, an injury such as loss of
eyesight may result.
• Exposed wires must be insulated with electrical tape.
Otherwise, a short circuit, fire, or electric shock may result.
Warning

5
• Play the audio at a moderate volume level that permits you to
hear sounds from outside the car. Driving without being able to
hear outside sounds may result in an accident.
• Keep foreign objects out of the disc slot. They may cause fire
or electrical shock. Another possibility is that discs may be
damaged or become stuck.
• Do not stick your fingers or hands into the disc slot. Doing so
may cause personal injury.
• This product must be operated only as on-board equipment, or
it may cause electrical shock or injury.
• Do not play distorted sounds for long periods of time;
the speakers may overheat and cause a fire.
• Never use batteries other than those specified. Do not mix new
and old cells. Doing so may cause a fire or personal injury due
to a battery explosion or chemical leaks.
• Pay attention to the (+) and (
- ) polarity of the battery when
installing them in the product. Incorrect installation may cause
personal injury or product damage spoilage due to a battery
explosion or chemical leakage.
• For best results, this product should be installed by a
professional installer.
Contact the dealer whom you purchased the product for an
appointment.
• When installing this product, be sure to use the supplied
mounting hardware. If parts other than those supplied are
used, the unit may be damaged internally, or may not be held
in place securely and become dislodged.
Caution

6
• Avoid installing this product in places where it may get wet,
such as near windows, or in places that are moist or dusty.
Presence of liquid, moisture or dust inside this product can
cause short circuiting, resulting in smoke or fire.
• Do not install this product in locations where it cannot be
fastened securely, such as places subject to frequent vibration.
Otherwise, it may become dislodged and cause an accident or
injury.
• Do not block this product's vent or heat sink. If either is
blocked, excessive heat build-up may occur and cause a fire.
• If this product is not connected properly, a short circuit, fire or
accident may occur.
• When routing cables, use care so that they do not contact
sharp metal parts such as brackets or screw tips. Otherwise, a
short circuit, electric shock, fire or accident may result.
• Do not obstruct the vent on this product. If blocked, excessive
heat build-up may occur and cause a fire.
Caution

7
Table of Contents
Operating precautions...............................................10
Notes on operation .......................................................................10
About compact discs ....................................................................11
About cleaning a CD ....................................................................13
Names of controls and parts ....................................14
ESN (Key CD) security operating procedure ..........15
How to program the Key CD ........................................................15
How to cancel the Key CD ...........................................................16
How to change the Key CD ..........................................................17
How to resume normal operation (ESN security lock out)............17
What happens if an incorrect CD is inserted? ..............................18
How to turn the security indicator on/off .......................................19
How to read the Electronic Serial Number ...................................19
Basic operation ..........................................................20
Turning the power on and off .......................................................20
Listening to a CD..........................................................................21
Listening to the tuner....................................................................22
Adjusting audio volume ................................................................23
Switching audio control modes.....................................................24
Enabling the loudness control ......................................................26
Making changes with Display Adjustment Mode ..........................27
Making changes with Function Mode ...........................................30
Others...........................................................................................34
How to operate the CD player..................................38
Listening to CDs ...........................................................................38
Advancing to the next track or returning to the beginning of
the track being played ..................................................................39
Fast Forward/Rewind ...................................................................39
Playing the beginning of tracks (SCAN) .......................................39
Repeating the same track (REPEAT)...........................................40
Playing tracks in random order (RANDOM) .................................40
Switching a CD to pause/play ......................................................41
Ejecting the disc ...........................................................................41
Creating a title for a CD................................................................42
Changing a previously set title .....................................................44
Deleting a previously created title ................................................45
Changing the number of CD titles ................................................46
Displaying CD text........................................................................47

8
How to operate the MP3 player ................................48
About MP3....................................................................................48
Listening to MP3 file .....................................................................51
Advancing to the next track (file) or returning to the beginning of
the track (file) being played ..........................................................52
Skipping to the next or previous folder .........................................52
Return to the root directory of the CD ..........................................52
Playing the beginning of files (SCAN) ..........................................53
Repeating the same file (REPEAT)..............................................53
Playing files in random order (RANDOM) ....................................54
Displaying title ..............................................................................55
How to operate the tuner ..........................................56
Tuning to a station........................................................................56
Entering stations into memory automatically
(The automatic preset mode: ASM) .............................................57
Manually setting stations into memory .........................................58
Preset station scan.......................................................................59
Setting a station name..................................................................60
Deleting a station name................................................................62
Changing the number of bands ....................................................63
FM reception characteristics ........................................................64
How to operate the Sound Adjustment Mode .........66
About Sound Adjustment Mode....................................................66
Operations during Normal Mode ..................................................73
Operations during Pro Mode ........................................................86
How to use the NOB remote control ........................98
Precautions in use of the remote control......................................98
Cleaning the remote control .........................................................98
Turning the power on/off ..............................................................99
Adjusting the audio volume ..........................................................99
Switching playback modes .........................................................100
How to play the tuner .................................................................100
How to play CDs.........................................................................101
Illuminating the NOB remote control ..........................................102
Enabling the optional E-COM feature.........................................102
Switching the remote control settings.........................................103
Replacing the battery .................................................................104

9
How to use an optional Card remote control ........106
Turning the power on/off ............................................................106
Adjusting the audio volume ........................................................106
Switching playback modes .........................................................107
How to play the tuner .................................................................107
How to play CDs.........................................................................108
Enabling the optional E-COM feature.........................................109
Switching the remote control settings.........................................110
Replacing the battery .................................................................111
How to operate the receiver with an optional
CD changer connected............................................112
Switching the input channel........................................................112
Listening to a CD........................................................................112
Advancing to the next track or returning to the beginning of
the track being played ................................................................112
Fast Forward/Rewind .................................................................113
Playing the beginning of tracks (SCAN) .....................................113
Repeating the same track (REPEAT).........................................114
Playing tracks in random order (RANDOM) ...............................114
Skipping to the next or previous CD...........................................115
Specifying a CD to play ..............................................................115
Others .......................................................................116
Connecting Portable Audio Players to the AUX Jack.................116
If you have a question:............................................117
Displayed information (for troubleshooting)................................118
Specifications ..........................................................121
Before installation ...................................................122
Components ...............................................................................122
Installation angle ........................................................................123
Mounting instruction ...............................................124
Mounting the main unit ...............................................................124
Names of lead wires and destinations .......................................126
System .......................................................................................127

10
Operating precautions
<Your CD8053 will perform well over a long period of time through correct
handling and care.>
• For your safety, play only at volume levels that allow outside sounds to be
heard.
• We recommend using with this player a disc with
the logo shown to the left.
• You can play music CDs(CD-R/CD-RW) on this
player. Be sure to use discs that have been
properly processed.
Depending on the editing equipment used, some
discs may not play properly.
• Do not insert anything other than a CD into the
disc slot.
Do not insert any foreign objects, such as coins or
credit cards, into the disc slot. Be especially
watchful of children’s mischief in this regard.
• Avoid severe mechanical shock.
When the player is subjected to severe vibration
while traveling over a rough surface, playback
may be intermittent. When a situation like this
occurs, resume playback after returning to a
smoother road.
• About dew condensation.
In cold or rainy weather, just as the interior glass
surface gets fogged, dew (water condensation)
may also settle on the deck. When this occurs,
disc playback may become intermittent or
impossible. Dehumidify the air in the vehicle for a
while before resuming playback.
• Cleaning the disc slot.
The disc slot tends to get dusty. Clean it
occasionally to prevent accumulated dust from
scratching the discs.
Notes on operation
Operating precautions

11
Operating precautions
• The signal recorded on a compact disc is read by a laser beam, so
nothing touches the disc surface. A scratch on the recorded surface or a
badly warped disc may cause deteriorated sound quality or intermittent
playback. Observe the following precautions to ensure high quality sound
performance:
• Do not leave an ejected disc in the disc slot
for very long; the disc may warp. Discs
should be stored in their cases and kept
away from high temperature and humidity.
• Do not stick a piece of paper or tape on, nor
write on or scratch either side of a disc.
• Discs spin at a high speed inside the deck.
Keep cracked or warped discs out of the
player to avoid damaging it.
• Avoid touching the recorded surface when
handling a disc; handle discs by their edges.
About compact discs

12
Operating precautions
About CD accessories
• Do not use accessories
(stabilizers, protective seals, laser
lens cleaners, etc.) sold for
“improving sound performance”
or “protecting CDs.” The changes
in CD thickness or outside
dimensions made by these
accessories may cause problems
in the player.
About brand new CDs
• You may notice that some brand
new discs are rough around the
center hole or outside edge.
Remove the rough edges with
the side of a ballpoint pen, etc.
Rough edges may prevent
proper loading in the deck.
Flakes from the rough edges
may also stick to the recorded
surface and interfere with
playback.
Rough Edges
Ballpoint
pen
Flakes
Recorded surface
Rough
Edges
•Please be sure NOT to attach any
ring-shape protector (or other
accessory) to your discs. Those
protectors are commercially
available and said to protect disc
and to improve sound quality
(and antivibration effect), but they
can do more harm than good in
regular uses. The most common
problems are Insert/Eject related
problems and "No playback"
problems due to the protector
ring that came off in the disc
mechanism.

13
Operating precautions
About borrowed CDs
•Do not use a CD with glue or
remnants of adhesive tape or
labels. They may cause the CD
to get stuck inside or damage
the deck.
How to remove CDs
•When removing the ejected disc,
pull it straight out along the slot.
Pressing downward in the
process may scratch the
recorded surface of the disc.
OKAY
NO GOOD
About irregularly-shaped CDs
•Specially-shaped CDs, like
heart-shaped or octagonal CDs,
cannot be played. Do not
attempt to play them, even with
an adapter, since they may
damage the player.
•Use a commercially available compact disc
cleaner to clean a CD, wiping lightly from the
center to the edge.
•Do not use benzine, thinner, LP record spray
or other cleaners on CDs. They may damage
a CD’s finish.
XXXX
XXXX
XXXX
About cleaning a CD

14
Names of controls and parts
Front view
With the front open
Never place an object or rest your hands or the like on the front
panel.
Caution
Names of controls and parts
Switches disc modes and switches to AUX mode.
Activates and deactivates mute.
Opens/closes front panel and adjusts angle.
Selects radio preset channels and performs disc mode
functions.
Turns the sound adjustment mode ON/OFF.
Turns the display adjustment mode ON/OFF and switches
screen display.
Automatically finds radio reception and fast forward/rewind.
Selects radio stations and CD tracks.
Returns to previous screen.
Turns the function mode ON/OFF.
Resets deck functions to default settings.
Turns deck power ON/OFF.
Switches to radio mode and switches radio bands.
Adjusts volume and performs other functions.
Inserts compact discs.
[DISC] button
[E-COM] button*
[OPEN] button
Buttons [1] to [6]
[SOUND] button
[DISP] button
[SEEK /FAST ] button
[SEL] button
[RTN] button
[FUNC] button
[RESET] button
[PWR] button
[FM AM] button
[AUDIO CONTROL] button
Disc slot
*: Double function button "E-COM" & "MUTE" functions
①② ⑤⑥⑦③ ④
⑬⑫ ⑪⑩⑨⑦
⑮
⑧⑭
④

15
ESN (Key CD) security operating procedure
How to program the Key CD
Check that the Power is OFF.
1
Press and hold button [6], then the [FUNC] button, and
hold both for more than one second.
2
A [SEC] message appears, then in two seconds it will change
to [DISC].
The front panel opens; the CD8053 is now ready to accept your
Key CD in the CD slot.
Insert the CD into the slot.
3
The front panel closes.
A [SEC] message appears, the front panel opens, then the Key
CD is ejected.
ATTENTION
•If there is a problem with the inserted CD, an [ERR] message
will appear for two seconds and the CD will be ejected. Reinsert
the ejected CD.
•If a CD causes the [ERR] message to appear twice in a row, a
[CHANGE] message will appear for two seconds. Try another
CD.
•The Security indicator will flash whenever the vehicle’s ignition
is switched off.
ESN (Key CD) security operating procedure
[FUNC] button
Button [6]

16
ESN (Key CD) security operating procedure
How to cancel the Key CD
Turn OFF the Power.
1
Press and hold button [6], then the [FUNC] button, and
hold both for more than one second.
2
A [SEC] message appears, then in two seconds it will change
to [DISC].
The front panel opens; the CD8053 is now ready to accept your
Key CD in the CD slot.
Insert your Key CD into the slot.
3
The front panel closes.
A [CANCEL] message appears, the front panel opens, then the
Key CD is ejected.
The Key CD is cancelled.
ATTENTION
•This process cancels the protection for the ESN deck.
•If power to the ESN deck is disconnected, then
reconnected, a Key CD will not need to be inserted in order
to return the unit to normal operation.
•Inserting a CD other than the Key CD will not cancel the
protection. Instead, the display will show [ERR] for two
seconds, then the normal CD playback mode will activate.
[FUNC] button
Button [6]

17
ESN (Key CD) security operating procedure
How to change the Key CD
First, cancel the existing Key CD.
1
Refer to “How to cancel the Key CD.”
Next, program a new Key CD.
2
Refer to “How to program the Key CD.”
How to resume normal operation
(ESN security lock out)
If power is disconnected while ESN security is active (a Key CD was
programmed), operation is disabled until power is restored and the
unit unlocked. Follow this procedure to resume normal operation.
When the power is turned on after disconnecting the
battery power, a [SEC] message will appear for two
seconds. Thereafter, the message changes to [DISC]
and the CD8053 is ready to accept your Key CD into the
slot.
1
Insert your Key CD.
2
If the correct CD is inserted, an [OK] message will appear for
two seconds and the CD will begin playing.
ATTENTION
•If an incorrect CD is inserted, an [ERR] message will appear
for two seconds, after which the CD will be ejected.
•You must use the same CD used for Key CD programming;
a duplicate CD may not work properly.

18
ESN (Key CD) security operating procedure
What happens if an incorrect CD is
inserted?
An [ERR] message will be appear, then change to a
flashing [DISC], then the CD will be ejected.
1
You will have five uninterrupted attempts to insert the correct
CD.
Press the [FUNC] button.
4
You will have five more attempts the correct disc.
After the 5th incorrect attempt, the display reads [HELP].
2
If [HELP] appears on the screen, press button [6], then
the [FUNC] button, and hold them for five seconds.
3
ATTENTION
Number of errors: Numbers indicated the number of errors that
occurred.
ONote O
If after 10 tries the correct Key CD is not inserted, the display
reads [CALL800]; the unit must be returned to Eclipse to be
reset. In this case, please contact your Eclipse dealer for
assistance or call Eclipse directly at [phone].
Button [6]
[FUNC] button
Your key CD can be easily forgotten. Write the
album name in a reminder note (See Page 131).

19
ESN (Key CD) security operating procedure
How to turn the security indicator on/off
With the power OFF, press button [2], then the [FUNC]
button and hold both for more than one second.
1
[IND. FLASH] or [IND. -----] appears on the display.
2
[IND. FLASH] means the security indicator will flash when the
vehicle’s ignition is off, and [IND. -----] means it will not. Repeat
the above steps to reactivate the flash mode.
Once ESN security is activated, the indicator flashes whenever the
vehicle’s ignition is turned off, warning potential thieves that the unit
is protected. However, if you do not want this visible deterrent, it may
be turned off.
How to read the Electronic Serial Number
Turn OFF the Power.
1
Press button [4], then the [FUNC] button, and hold both
for more than one second.
2
[ESN] appears on the display, followed by an eight-digit
number; this number is your electronic serial number (ESN).
You may use this number to identify your Eclipse CD8053 in
the event it is recovered after being stolen.
Button [2] Button [4]
[FUNC] button

20
Basic operation
When the power is turned on, the state used when the power was
turned off such as CD and tuner playing is restored.
When the vehicle has no ACC position on the ignition switch, care is
needed when turning off the deck. Follow Step 2 or Step 3 when
turning off the power.
Turning the power on and off.
Turning the power on and off
When power is OFF, press the [PWR] button.
1
When the unit is in ACC OFF mode, press the [PWR] button
once and it will change to Standby mode. When you press the
[PWR] button again, the power will come on.
When power is ON, press the [PWR] button for less than
two seconds.
2
The unit will change to Standby mode.
When power is ON, press the [PWR] button for more
than two seconds.
3
The unit will change to ACC OFF mode.
This section covers basic operating procedures. For additional
details, please refer to the sections on specific functions.
ATTENTION
If a car is not equipped with an ACC position (for example, a
European car), keep the [PWR] button depressed for more than
two seconds.
Basic operation
[PWR] button