EcoFlow APP for Smart Home Panel User manual

APP User Manual for Smart Home Panel

How to Connect Devices
How to Configure Parameters
Common Functions
2
4
1
Content

1
How to Connect Devices
①If you do not have an EcoFlow account, register it as instructed in the app.
1. Enable Bluetooth
2. Search for devices
Open the Ecoflow app①, click the Add(+) icon in the
upper-right corner to search for devices, and tap the
device icon with the required serial number (SN) to
connect the device.
After supplying power to the SHP, open the front cover and short press the IOT button. Meanwhile, enable
Bluetooth and Wi-Fi on the mobile phone.
SN:0001
12
3
4
56
7
8
9
10
IOT RESET
GRID AC1 AC2 ERROR
PAUSE/ RESUME
INFINITY AC1 INFINITY AC2
POWER STATION

How to Configure Parameters
2
2.Internet Setup
Enter the name and password of your Wi-fi access to complete the network
configuration① and then enable the IOT mode.
1. Setting up the grid
Select your country and state②, and the system will
automatically adapt to the local grid parameters. If
there is any error, you can also modify the parame-
ters manually.
If the local voltage is less than 120 V, you can enable
the split-phase③function.
①If you skip the step of configuring the network, you can view only 7 days of electricity consumption data in the app. You must reconfigure
the network before you can view 30-day data.
②If you need to reconfigure your location, navigate to "Decive Homepage > Settings".
③Setting up split-phase: In areas where the single-phase grid voltage is less than 120 V, you can enable the split-phase function to connect
to a high-voltage (240 V) load.

3
2. Setting up My Home
You need to configure the parameter settings①for 10 household power circuits, including enabling or disabling each
power circuits and setting a custom name and icon for each power circuits.
When setting the rated current of a circuits, refer to the rated current of the circuits in the circuit breaker of SHP.
3.Setting up the Power Station
Infinity AC1 and AC2 respectively correspond to the
charging ports of two DELTA Pro devices. Set the
rated current based on the power circuits connect-
ed to the DELTA Pro charging port.
You can also enable the EPS mode in case of emer-
gencies.
①If you want to adjust the parameters of the power circuit, go to "Device Homepage - ⚙ Settings" in the upper-right corner, and find the
circuit option to modify it.

4
During Device Wiring Testing, all load circuits in the
SHP are disconnected, and the AC output/input
ports of DELTA Pro are off.
The self-check duration is about one second.
If you are prompted with a wiring error, check man-
ually as instructed (as shown in the left figure).
If the Device Wiring Testing passes, the app throws
out a prompt stating that the check succeeds①,
and you can start using the SHP with confidence.
4. Device Wiring Testing
During the initial circuit connection of SHP, the app throws out a Device Wiring Testing after you have configured the
parameters.
If you have reconfigured the circuit connection after using it for a period of time, find Device Wiring Testing by navigat-
ing to "Device Homepage - ⚙ Settings" in a timely manner to conduct self-check so as to ensure that the circuits is
correct.
①If the device wiring testing passes, you still do not see the prompt stating that the check succeeds, you can take the following measures
to solve this issue:
If you have configured the network, check whether Wi-Fi is faulty. After confirming that the network is normal, restart Wi-Fi and try again.
If you are using the Bluetooth direct connection mode, the self-check passes if you do not see any failure prompt.

Common Functions
4
After configuring the parameters, you can go to the Device Homepage of the SHP to quickly
try out its common functions.
1. Set Automation
You can enjoy a smarter and more stable power
consumption environment by configuring a schd-
ule to regularly charge DELTA Pro or regularly
switch the power supply mode of the circuit.You
can turn on this option by tapping the Add(+) icon
in the upper-right corner of the "Automation" page.
Basic settings
Power consumption overview
Set automation
Get insight of your energy consump-
tion history Reconfigure the network
Monitor and control the 10 circuits to
extend the runtime during blackouts
Power ststion usage overview
Monitor and control your power
stations

5
2. Monitor and control the 10 circuits
Emergency backup policy
When the grid encounters an outage①, the system automatically switches the
selected circuit to battery backup. When the power capacity becomes insuffi-
cient, only the prioritized circuits will be powered.
You can adjust the priority of a circuit by long-tapping the icon for the circuit and
dragging it up or down.
Recharge DELTA Pro regularly
You can freely set the charging period, charging
port, and charge level② to avoid forgetting to
charge the device, resulting in insufficient power.
Switch to battery backup regularly
You can regularly switch certain circuits to be
powered by DELTA Pro, so as to stagger the peak
power consumption and save your electricity costs.
On the circuit list page, you can view the power supply mode, real-time power, and total power consumption of each
circuit. Tap the icon for a circuit to open the details page, where you can view the power consumption data of each
circuit.
①In the case of grid power outage, if the emergency backup power policy conflicts with the timed power switching policy, the
system prioritizes the emergency backup power policy.
②After you set the charge level, the system will charge the power supply to the set value (5% more or less) in the corresponding
period. You can set the charging capacity based on your needs.

6
3. Overview of electricity consumption data
On the "Dashboard" page, you can tap the options to view the total electricity consumption, total power station usage,
and total grid power usage. In "Usage overview", you can switch between daily data, weekly data, and monthly data②.
Device log Tap to switch the
circuit
Error report①
①Click ERROR to view the error report. You can instantly find the exact exception of the product and view the correction suggestions for it.
If you cannot solve the exception, contact our after-sales customer service with the product SN, error report screenshots, and a simple
problem description.
②If you are using the Bluetooth direct connection mode, you can view only 7-day electricity consumption data in the app. You must reconfig-
ure the network before you can view 30-day data.

7
4. DELTA Pro operation page
On the operation page of DELTA Pro, you can quickly understand the working status of DELTA Pro. By tapping the
"Recharge" button, you can manually charge the power station, and the system will charge DELTA Pro with a
power of 1,600 W, which will be automatically stopped when DELTA Pro is fully charged. You can also turn off this
option manually.
5. Settings
On the "Settings" page, you can modify various parameters of the device, including basic information and power
station parameters.
①Min power capacity: You can set a minimum discharge level for DELTA Pro. When the power capacity of DELTA Pro is lower than the set
value, it stops discharging and enters the standby state, in which case only the charging command is responded.
②If you have reconfigured the wiring of SHP, tap "Device Wiring Testing" to conduct self-check in a timely manner to ensure that the wiring
is correct.
Min power capacity①
Wiring check②
EPS mode