EcoloxTech ULV Cold Fogger User manual

ULV COLD FOGGER
Operation
1. After pouring an appropriate amount of water or solution into
the tank, lock the cap of the tank completely.
2. Turn the air control switch acounter-clockwise, then ensure
that the solution control valve bis completely locked by
turning clockwise before connecting the power line.
3. Make the spray nozzle facing the working direction, and turn
the air control switch cclockwise to adjust the speed of air.
4. After confirming the speed of air ejected from the injection
nozzle does not aect the surroundings, adjust the amount of
water or solution by opening the solution control valve d.
Stop operation
1. First, make sure to completely close the solution control
valve eso that water or solution is not injected.
2. Turn the air control switch fcounter-clockwise and stop the
motor.
3. Remove the power cord.
4. Empty the solution tank and clean it.
5. Then spray clean water to the hose and nozzle
for washing.
a
b
c
d
c
f

Use Precautions
IN ORDER TO PREVENT ACCIDENTS DURING OPERATION,
PLEASE READ THE USER’S GUIDE BEFORE USE.
• Please use the electricity equipped with the grounded circuit breaker.
• Do not use when the power line is wet. Do not touch the cord with wet hands.
• Do not apply more than one plug in one electrical outlet.
• Check the status of the power line before operation. If damaged, call the certified
technician for replacing the cord.
• Always pull the plug out of the electrical outlet when the machine is
disassembled or not operated.
• Disconnect power while the tank is charged.
•When the machine is wet, never plug in the power. Let the wet parts replaced by a certified
technician.
•For the additional cable, use the proper one equipped with ground connection.
•Do not let somebody operate the machine without wearing the proper protective equipment
recommended by chemical manufacturer.
•Do not spray toward humans, electric appliances, and the main body.
•Keep away from children or unauthorized persons.
•Always use the manufacturer-recommended parts for safety of the machine.
•To prevent damage to the objects, keep a proper distance when sprayed.
•Be careful of fire and shock.
•Do not use water mixed with impurities, or flammable materials.
•If there is unusual noise, smell or smoke in the machine, unplug immediately.
Storage Precautions
•When cleaning the machine, unplug first, and do not use water or detergent.
•Make sure to clean the tank after use, and keep away from children.
•Keep the machine in a dry place away from the direct sunlight at 10-40°c.
WHEN THE MACHINE IS NOT WORKING
•Check if the power cord is plugged in.
•Check if the electricity is connected to the electrical outlet.
•Check if the voltage is 110V (for US model) or 220V (for models outside US).
•Check the fuse.
•If the suction hose inside the tank is clogged, remove the foreign
substances.