EcoloxTech 240 Operating and maintenance instructions

1 |
INSTALLATION MANUAL
EcoloxTech 240 System
EcoloxTech
102 NW 22nd Ave
Miami, FL 33125
[e-mail]

2 |
Table of Contents
Standard Installation
…………………………………………………………………………...
Page 3
Parts and Accessories
…………………………………………………………………………...
Page 4
Optional Parts
…………………………………………………………………………...
Page 7
Tools Needed
…………………………………………………………………………...
Page 8
Installation Add-ons
Holding Tank + Pump
…………………………………………………………………………...
Page 9
Remote Switch
…………………………………………………………………………...
Page 12
Operational Mode
…………………………………………………………………………...
Page 13

3 |
1
Option A) 3/8” Comp x 1/2” FPT Connector
(SKU: P-1035)
10
3/8" Push Fit x 1/2" MPT
(SKU: P-1044)
Option B) 1/2” Comp x 1/2” FPT Connector
(SKU: P-1021)
11
3/8" OD LLDPE Polyethylene Tubing – Cut to size
(SKU: T-1013)
2
3/8" Push Fit x 1/2" MPT
(SKU: P-1044)
12
3/8” x 3/8” Push Fit Valve
(SKU: P-1014)
3
3/8" OD LLDPE Polyethylene Tubing – Cut to size
(SKU: T-1013)
13
3/8" OD LLDPE Polyethylene Tubing – Cut to size
(SKU: T-1013)
4
3/8” OD Push Fit Check Valve
(SKU: P-1118)
14
3/8” Stem x 3/8” Push Fit Elbow Connector
(SKU: P-1106)
5
3/8" OD LLDPE Polyethylene Tubing – Cut to size
(SKU: T-1013)
15
EcoloxTech 240 System
(SKU: E-240S)
6
3/8" Push Fit x 1/2" MPT
(SKU: P-1044)
16
1/2" Stem x 1/2" Push Fit Elbow Connector
(SKU: P-1105)
7
3/4" MPT x 1/2" FPT Hex Bushing
(SKU: P-1030)
17
1/2" OD LLDPE Red Polyethylene Tubing – Cut to size
(SKU: T-1063)
8
Filter Housing 3/4” FPT
(SKU: F-1015) (SKU: F-1020)
18
1/2” Push Fit x 1/2” MPT
(SKU: P-1098)
9
3/4" MPT x 1/2" FPT Hex Bushing
(SKU: P-1030)
19
Flexible Hose with Mount
(SKU: E-1100)
A
Mounting Screws (Step 19) - Quantity: 3 (SKU: P-1102)
C
EcoloxTech 240 Mounting Bracket (SKU: E-1071)
Mounting Screws – Quantity: 4 (SKU: P-1103)
B
Mounting Kit for Filter Housing (Step 8) (SKU: E-3195)
D
Teflon Thread Seal Tape (SKU: P-1042)

4 |
Parts and Accessories (for replacement parts, visit: store.ecoloxtech.com)
Image
Part Name / SKU
Quantity
Water Source Connection
3/8” Comp x 1/2” FPT Connector
(SKU: P-1035) 1
1/2” Comp x 1/2” FPT Connector
(SKU: P-1021) 1
Fittings
3/8” OD Push Fit Check Valve
(SKU: P-1118) 1
3/8" Push Fit x 1/2" MPT
(SKU: P-1044) 3
3/4" MPT x 1/2" FPT Hex Bushing
(SKU: P-1030) 2
3/8” x 3/8” Push Fit Valve
(SKU: P-1014) 1
3/8” Stem x 3/8” Push Fit Elbow Connector
(SKU: P-1106) 1
1/2" Stem x 1/2" Push Fit Elbow Connector
(SKU: P-1105) 1
1/2" Push Fit x 1/2" MPT
(SKU: P-1098) 1
Tubing
3/8" OD LLDPE Polyethylene Tubing - Clear
(SKU: T-1013) 6 feet
1/2" OD LLDPE Polyethylene Tubing - Red
(SKU: T-1063) 6 feet

5 |
Image Part Name / SKU Quantity
Filter Housing, Filter, & Mounting Kit for Filter Housing
Filter Housing 3/4” FPT
(SKU: F-1015) 1
10" Polypropylene Filter Cartridge
(SKU: F-1020) 1
Filter Housing Mounting Bracket
(SKU: P-1124) 1
Sheet metal screws, Phillips pan head, Stainless steel 18-
8, #14 x 1-1/4”
(SKU: P-1103)
8
Conical anchor, plastic, ribbed, #14-#16 x 1-1/4”
(SKU: P-3191) 4
Spout
Flexible Hose with Mount
(SKU: E-1100) 1
Metal screws, Phillips pan head, Stainless steel 18-8, #8 x
1-1/2”
(SKU: P-1102)
3
Conical anchor, plastic, ribbed, #6-#8 x 7/8”
(SKU: P-3190) 3

6 |
Image Part Name / SKU Quantity
EcoloxTech 240 System Mounting Bracket
EcoloxTech 240 Mounting Bracket
(SKU: E-1071) 1
Sheet metal screws, Phillips pan head, Stainless steel 18-
8, #14 x 1-1/4”
(SKU: P-1103)
4
Conical anchor, plastic, ribbed, #14-#16 x 1-1/4”
(SKU: P-3191) 4
Installation Accessories
Teflon Thread Seal Tape
(SKU: P-1042) 1
3/16” Masonry Drill Bit
(SKU: P-3186) 1
5/16” Masonry Drill Bit
(SKU: P-3187) 1

7 |
Optional Parts (for replacement parts, visit: store.ecoloxtech.com)
Image
Part Name / SKU
Quantity
Couplings for 3/8” Tubing
3/8” Push Fit Coupling
(SKU: P-1032) 1
3/8” Push Fit Elbow
(SKU: P-1033) 1
Tees for Connecting Water Source
3/8” Push Fit Tee
(SKU: P-1054) 1
3/8” x 3/8” x 3/8” Compression x Compression Brass T-
Fitting
(SKU: P-1061)
1
1/2” x 1/2” x 3/8” Compression x Compression Brass T-
Fitting
(SKU: P-1062)
1
Mounting 1/2” Tubing
Tubing Clamp, 1/2”
(SKU: P-1113) 6
#4038 Sheet metal screws, Phillips truss head, Stainless
steel 18-8, #6 x 1”
(SKU: P-3188)
6
#10852 Conical anchor, plastic, ribbed, #6-#8 x 7/8”
(SKU: P-3190) 6

8 |
Tools Needed
Image
Name
Function
Ratcheting PVC Pipe Cutter Cutting Polyethylene Tubing
and Cutting PVC Pipe
Tongue and Groove Pliers Tightening Fittings
Phillips Screwdriver Mounting Brackets
Electric Drill / Driver and Phillips
Screwdriver Bit Mounting Brackets

9 |
40 Gallon Holding Tank + Pump (SKU: E-4217)
Step 1: Connecting EcoloxTech 240 System Outflow to Holding Tank
1
EcoloxTech 240 System
(SKU: E-240S)
4
3/4" MPT x 1/2" FPT Hex Bushing
(SKU: P-1030)
2
1/2" OD LLDPE Red Polyethylene Tubing
(SKU: T-1063)
5
40 Gallon Holding Tank with Pre-Installed Float Sensor
(SKU: E-1190)
3
1/2" Push Fit x 1/2" MPT
(SKU: P-1098)

10 |
Step 2: Connecting Holding Tank to Constant Pressure Pump
1
40 Gallon Holding Tank with Pre-Installed Float Sensor
(SKU: E-1190)
5
1” FPT X MPT PVC 90 Degree Elbow
(SKU: P-4208)
2
1” MPT x Socket PVC 90 Degree Elbow
(SKU: P-1196)
6
Grundfos Scala2 Composite Pump - 110/120V
(SKU: G-1011)
3
1” PVC Schedule 40 Pipe – Cut to size
(SKU: T-1200)
7
1” FPT X MPT PVC 90 Degree Elbow
(SKU: P-4208)
4
1” Socket x FPT PVC Female Adapter
(SKU: P-1198)
8
1” Socket x FPT PVC Female Adapter
(SKU: P-1198)
A
PVC Heavy-Duty Cement
(SKU: C-4211)

11 |
Step 3: Connecting Float Sensor to EcoloxTech 240 System
1
40 Gallon Holding Tank with Pre-Installed Float Sensor
(SKU: E-1190)
3
EcoloxTech 240 System
(SKU: E-240S)
2
Sensor-to-System Quick Connect Cable
(SKU: E-3192)
Operational Mode
After connecting the float switch sensor, the system must be set to “Level Mode”. See page 13 for
instructions on changing the operational mode.

12 |
Remote Switch (SKU: E-1187)
1
EcoloxTech 240 System
(SKU: E-240S)
3
Remote Switch
(SKU: E-1187)
2
Sensor-to-System Quick Connect Cable
(SKU: E-3192)
Operational Mode
After connecting the remote switch sensor, the system must be set to “Level Mode”. See page 13 for
instructions on changing the operational mode.

13 |
Operational Mode
No.
Description
1
LED display
2
System is running
3
Check error code in LED display
4
System RUN On/Off
5
Mode button (see uses below)
6
Set button (see uses below)
7
Reset alarm to resume running
Operational Modes
Standard Mode Setting to standard mode:
1. Press and hold “Set” button for 3 seconds and release
2. Press “Reset” button once
3. Press and hold “Mode” button for 3 seconds and release
Level Mode Setting to level mode:
1. Press and hold “Set” button for 3 seconds and release
2. Press “Set” button once
3. Press and hold “Mode” button for 3 seconds and release