Econoco sellutions PSBBDTADJ User manual

ITEM# PSBBDTADJ STEP DOWN BALLET BAR
PAGE 1

TOP UPRIGHT LONG
QTY. 1
TOP UPRIGHT SHORT
QTY. 1
STEP DOWN HANGBAR
QTY. 1
ADJUSTABLE CONNECTOR
QTY. 2
SET SCREW
QTY. 2
BOTTOM UPRIGHT
QTY. 2
FOOT
QTY. 2
CROSS BAR
QTY. 1
CASTER
QTY. 4
ALLEN KEY
QTY. 1
SMALL WRENCH
QTY. 1
PAGE 2

BY HAND, SCREW IN THE CROSSBAR TO FOOT AS SHOWN.
TIGHTEN FULLY.
1
2
2
1
BY HAND, SCREW THE FOOT TO CROSSBAR AS SHOWN. TIGHTEN SUFFICIENTLY
& MAKE SURE IT ALIGNS WITH THE OTHER FOOT AS SHOWN BELOW
PAGE 3

3
3
SCREW IN THE CASTERS AS SHOWN USING PROVIDED WRENCH
PAGE 4

4
4
BY HAND, SCREW IN BOTTOM UPRIGHTS AS SHOWN
PAGE 5

G
H
FACING OUT
SET SCREW
FACING OUT
5
5
BY HAND, SCREW ADJUSTABLE CONNECTOR TO
BOTTOM UPRIGHTS SUFFICIENTLY &
THEN ADJUST SO THAT IT ALIGNS AS SHOWN BELOW
6
6
TIGHTEN SET SCREW USING HEX WRENCH TO LOCK
ADJUSTABLE CONNECTOR IN PLACE.
PAGE 6

7
BY HAND, SCREW TOP UPRIGHTS TO HANGBAR AS SHOWN
7
PAGE 7

8
8
(UNTIGHTEN HAND WHEEL)
DROP HANGBAR FROM STEP 7 AS SHOWN AT DESIRED HEIGHT
& LOCK IN POSITION BY TIGHTENING THE HAND WHEEL
PAGE 8