ECOPERLA SOFTCAB User manual

WWW.ECOPERLA.COM
SOFTCAB
WATER
SOFTENER
ECOPERLA
SOFTCAB
USER MANUAL
original product of Ecoperla

KEEP THIS USER MANUAL, SINCE IT CONTAINS THE WARRANTY AND THE SERVICE CARD

1.
1.1. Safety measures
1.2.
1.3.
1.4.
2.
3.
4.
4.1.
4.2.
4.3.
4.4. I
5.
5.1.
5.2.
5.2.1.
5.2.2.
5.2.3.
5.2.4.
5.2.5.
5.2.6.
5.3.
5.3.1.
5.3.2.
5.3.3.
5.3.4.
5.3.5.
5.3.6.
5.3.7.
5.3.8.
5.3.9.
5.3.10.
5.3.11.
5.3.12.
5.4.
5.4.1.
5.4.2.
5.4.3.
5.4.4.
5.4.5.
5.4.6.
5.4.7.
5.4.8.
5.4.9.
5.4.10.
6.
6.1.
6.2.
TABLE OF CONTENTS
5
5
5
6
6
7
8
8
8
9
10
11
12
12
12
12
13
13
14
14
14
15
15
15
15
16
16
16
17
17
17
18
18
18
19
19
19
20
20
20
20
21
21
21
21
22
22
22

4
6.3.
6.4.
6.5.
6.6.
6.7.
7.
7.1
7.2.
8.
9.
10. Warranty
22
22
23
23
23
24
24
24
25
29
30

5
•
•
•
•
•
•
1. INTRODUCTION
1.1. SAFETY MEASURES
1.2. WATER SOFTENING

1.4. OPERATION AND MAINTENANCE SERVICE
Table: conversion of water hardness units
3
German
French
5 3,5
3
German
French
1.3. DESCRIPTION OF DEVICE OPERATION
BEWARE: We recommend using the Ecoperla Andotum resin cleaning granules and Ecoperla
Anbacter water disinfecon and maintenance product interchangeably every 6 months.

2. TECHNICAL DATA
Ecoperla Socab 12 Ecoperla Socab 25 Ecoperla Socab 35
Control valve CLACK UF CLACK UF CLACK UF
Connecon
Medium amount [l] 35
Medium
Recommended ow rate
[m3/h]
Maximum ow rate
[m3/h]
Operang pressure [bar]
Salt consumpon per
regeneraon [kg]
Water consumpon per
regeneraon [L]
Width [mm]
Height [mm]
Depth [mm]
Connecon height [mm]
Connecon width [mm]
Power supply
Water amount between
regeneraons in the case
of 10 dH hardness
~510 mm
~320 mm
~320 mm
~510 mm
~1145 mm
~1145 mm
~710 mm
~510 mm
~320 mm

4. INSTALLATION AND COMMISSIONING
4.1. REQUIREMENTS
•
•
•
•
•
•
•
•
•
•
3. SYSTEM COMPONENTS

4.2. INSTALLATION DIAGRAM
Treated water
Treated water
Water reject
Raw water
Raw water
7
6
123
4
5
6
71
4
5 2
3
1.
Main water shut-off valve
2.
Inlet valve to Ecoperla Softcab
3.
Mechanical water filter
4.
Ecoperla Softcab
5.
Outlet valve from Ecoperla Softcab
6.
Bypass valve
7.
Drain to the sewage system
ECOPERLA SOFTCAB CONNECTION DIAGRAM

4.3. CONTROL VALVE
Inlet and outlet from the control valve:
Drain to the sewage system:
1.
2.
3.
4. DLFC
5. BLFC
6.
7.
8.
9.
10.

4.4. INSTALLATION
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The device is ready for operaon. All you need to do is enter the hardness and the current
me. If you want to set an operang program for the device, proceed as described in point
5.2.

5. PROGRAMMING
5.1. OPERATING MODE DISPLAYS
TIME
REMAINING CAPACITY
3
DAYS UNTIL REGENERATION
FLOW
5.2. INITIAL SETTINGS
5.2.1. Language selecon
ENGLISH
LANGUAGE
•
•
• French
•
• German

5.2.2. Inial hardness
5.2.3. Hardness of soened water
* Inial hardness is hardness of untreated water (before
soening). In Ecoperla Socab, water hardness units are
entered in ppm. A conversion table for water hardness
units can be found in point 2.1 on page 6.
* Final hardness is hardness of water owing out of the
device. Entering nal hardness does not mean its actual
change. It refers to the change of the ion exchange
capacity when mixing water.
In order to set nal water hardness, change the sengs
of the mixer in the control valve.
If the mixer is fully screwed in, enter 0 ppm hardness.
In order to accurately verify hardness aer changing the
mixer sengs, check nal water hardness with a hard-
ness drop tester and enter it into the sengs in ppm.
In Ecoperla Socab, water hardness units are entered in
ppm. If water hardness is measured in other units, they
must be converted to ppm. A conversion table for water
hardness units can be found in point 2.1 on page 6.
WATER HARDNESS
HARDNESS OF SOFTENED WATER

5.2.4. Days between regeneraons
5.2.5. Regeneraon me sengs
starts.
5.2.6. Current me seng
REGENERATION TIME
NUMBER OF DAYS BETWEEN REGENERATIONS
TIME

5.3. INDIVIDUAL OPERATION MODE SETTING
5.3.1. Selecon of operaon mode
5.3.2. Counterow brine-up me
5.3.3. Backwash me
SOFTENING
TYPE
BACKWASH TIME
COUNTERFLOW BRINE-UP

5.3.4. Rinsing me
5.3.5. Salt ll in kilograms
5.3.6. Ion exchange capacity
RINSE
VALUE
CAPACITY

5.3.7. Regeneraon frequency
5.3.8. Regeneraon type
CAPACITY m3
AUTO
DELAYED REGENERATION
TYPE
5.3.9. Relay 1 sengs
OFF

5.3.10. Relay 2 sengs
5.3.11. Service alert
• OFF
• TIME
• M3
• TIME AND VOLUME
OFF
5.3.12. Maintenance service
SERVICE ALERT
TIME
MAINTENANCE SERVICE

5.4. OPERATING HISTORY
5.4.1. Number of days since regeneraon (basic history)
5.4.2. Number of m3 since regeneraon (basic history)
DAYS UNTIL REGENERATION
4
m3SINCE REGENERATION
3

RESERVE VOLUME HISTORY
TREATED VOLUME HISTORY
3
3
5.4.3. Reserve volume (basic history)
5.4.4. Treated water volume (basic history)
5.4.5. Maximum instantaneous ow (basic history)
MAXIMUM FLOW RATE HISTORY
5.4.6. Soware version (extended history)
This manual suits for next models
3
Table of contents
Other ECOPERLA Water Dispenser manuals