Avalon A3F User manual

A few simple steps to ensure
perfect water, every time.
English

English

English
www.avalonh2o.com
We’re Here to Help
Let’s Connect
Email Us:
[e-mail]
[e-mail]
Availability:
Monday-Friday: 9 a.m.-5 p.m.
@avalon_h2o Avalon Water Coolers Avalonh2o
Follow our social media accounts and stay up to
date on the latest Avalon news.
We are also available
for live video chat!

Use and Care Guide
MODEL: A3F
English
Registration
Please visit the website below to register your new water cooler within the first
30 days of purchase. Registration within the first 30 days will activate your one
year warranty.
www.avalonh2o.com/register-my-avalon-cooler
Please keep your model number, order number and purchase date
for future support. You can reach us at [e-mail].
Model Number
Order Number
Purchase Date

Contents
About Your Water Cooler
Meet Your Avalon Product
Part Names
Indicator Lights
Tech Specs
Getting Started
Unpacking
Install Filters
Install Water Bottle
Emptying the Drip Tray
Powering the Dispenser
Activate Heating and Cooling
User Guide and Maintenance
Flushing the Filters
Dispensing Water
Refilling the Bottle
Replacing the Filters
Cleaning
Rinsing, Cleaning, and Draining
Cleaning
Troubleshooting
Safety
Warranty
1-2
3-4
5
6
8
9
10-11
12
13
14
16
17
18-19
20-21
23-25
26-29
31-32
34-35
37
English

1
Sediment Filter
Meet Your Avalon Product
Inside the box, you’ll find:
Carbon Block Filter
Water Bottle Filter Funnel
5 Gallon Water Bottle
About Your Water Cooler
English

2
Meet Your Avalon Product
Custom Temperature
Piping hot,
cool or crisp
cold water
Bottom Loading
No more lifting,
flipping or spills
Empty Bottle Indicator
Notifies you when
your bottle is empty
NSF Certified Filters
We meet strict
standards for public
health protection
Child Safety Feature
Ensures safe hot
water flows for the
entire family
Built-in Nightlight
Makes late night
water trips a breeze
UL Listed
We design &
manufacture with
your safety in mind
Attractive Design
Attractive stainless
steel design
Dual Stage Filtration
Double the filtration
for twice the peace
of mind
About Your Water Cooler
English

3
Part Names
8. Cold Water
Push Button
12. Drip Tray
9. Filter Indicator Lights
7. Cool Water
Push Button
5. Hot Water
Push Button
6. Child
Safety Lock
10. Water Spout 11. Nightlight
1. Power Indicator Light 3. Cooling Indicator Light
4. Empty Bottle Indicator
2. Heating Indicator Light
13. Filter Reset Button
Replace Filters
ReplaceFilters
About Your Water Cooler
English

4
Part Names
17. Power Cord
14. Nightlight Switch
15. Cooling Switch
16. Heating Switch
18. Drain Outlet
19. Condenser
20. Pump Cleaning Drain
Push Connect Ring
About Your Water Cooler
English

5
Indicator Lights
Power Indicator Light
This light will remain on as long as the water cooler is plugged in to indicate that
the cooler is on.
Heating Indicator Light
This light will indicate when the water is heating. The light will remain on while the
water is heating and will turn o when it has reached the correct temperature of
185°F. As the water is dispensed the hot tank will refill and the water will heat. As
the water reheats this indicator light will turn on.
Cooling Indicator Light
This light will indicate when the water is cooling. The light will remain on while the
water is cooling and will turn o when it has reach the correct temperature of 47°F.
As the water is dispensed the cold tank will refill and the water will cool. As the
water cools this indicator light will turn on.
Empty Bottle Indicator Light
This light will indicate that the bottle below is empty and will need to be refilled.
This red light will blink to alert you of the empty bottle.
Filter Indicator Lights
The Heating Indicator Light and the Cooling Indicator Light will blink together to
alert you that the filter needs to be replaced.
About Your Water Cooler
English

6
Tech Specs
Avalon Model
Model
A3F
A23F
Hot/Cold/Cool Output
Hot Water Capacity
Hot Tank Volume
Cold Water Capacity
Cold Tank Volume
Stage 1 Filtration
Stage 2 Filtration
Product Size
Packing Size
Net Weight/Gross Weight
Voltage/Frequency
Cooling Method
Heating Method
Heating Watts / Cooling Watts
Power Consumption
1.8L/min / 2.2L/min / 2.0L/min
4 L/H ( ≥ 185°F)
1.16 Liters
2.5 L/H ( ≤ 47°F)
3.6 Liters
Sediment
Carbon Block
13”(L)x12”(W)x41”(H)
16”(L)x15”(W)x45”(H)
36.15 lb /46.5 lb
115 V 60Hz
Compressor
Internal Element
420W / 100 W
520 W
About Your Water Cooler
English

7
Getting Started
English

8
Unpacking Your Avalon Water Cooler
The unit has been cleaned prior to departing from the factory. To remove any
dust and debris that may collect during shipping we recommend cleaning the
unit prior to installation. For cleaning instructions, see pages 24-30.
Do NOT plug in the power cord yet.
Place dispenser upright on a hard and level surface in a cool and shaded
location near a grounded wall outlet. Position the dispenser so there is about four
inches of clearance from the wall on the back and both sides.
Unpack the machine, open the cabinet to remove the drip tray, and install it by
inserting it into place at the top of the cabinet door, see page 13.
Locating Dispenser
Getting Started
English

9
Installing the Filters
1. Open the cabinet door.
2. Remove the included 5 gallon water bottle from the cabinet.
3. Remove the probe assembly from
inside the 5 gallon water bottle and
hang it on the probe hanger.
4. Twist the filters into the filter heads in the
cabinet by rotating them clockwise. The
Sediment Filter should be on the left and the
Carbon Block Filter should be on the right.
FILTERRESET
Multi-Layer
Sediment
Carbon
Block
Getting Started
English

10
Installing the Water Bottle
2. Fill the included 5 gallon water
bottle with tap water.
1. It is recommended to insert the provided water
bottle filter funnel into the neck of the 5 gallon
water bottle while filling to ensure that no large
particles enter the 5 gallon water bottle that can
clog the machine’s water pump.
4. Slide the collar down until it
clicks into place.
3. Remove the water bottle filter
funnel and insert the probe assembly
back into the bottle.
collar
head
Getting Started
English

11
5. Push the head down until the
tube hits the bottom of bottle.
6. Slide the bottle into cabinet
and close the door.
Installing the Water Bottle
Getting Started
English

12
Getting Started
English
Emptying the Drip Tray
1. To remove the drip tray, grip the
front lip of the drip tray with both
hands.
2. Lift the drip tray upwards out of the
top of the door where is sits.
3. After emptying the drip tray, lower
it back into the top of the door.
No external drain is needed, the overflow will collect here. The red float will rise to
indicate when the drip tray needs to be emptied.

13
Powering the Dispenser
Plug cord into a properly grounded wall outlet. At this time the pump will begin to
move water from the bottle to the hot and cold tanks. It will take up to 12 minutes to
fill the tanks for the first time.
Please note: During this period the pump will run continuously. You will hear
a slight humming sound while the pump initially fills the tank and after each
time water is dispensed. This is normal.
Getting Started
English

14
Activate Heating and Cooling
To activate the cold water, push the cooling switch (#15) into the on (I) position by
pushing the top of the switch in. If you do not wish to have cold water you can leave
the switch in the o (O) position.
To activate the hot water, push the heating switch (#16) into the on (I) position by pushing
the top of the switch in. If you do not wish to have hot water you can leave the switch
in the o (O) position.
Please allow 15 minutes for the hot water to be heated. During this time the heating indicator
light (#2) will be steady. The light will turn o when the heating process is complete. Please allow
1 hour for the cold water to be cooled. During this time the cooling indicator light (#3) will be
steady. The light will be turned o when the cooling process is complete. If any error occurs
in the heating or cooling process, the indicator light will blink.
Before turning on the heating (#16) or cooling (#15) switches, ensure water is already filling inside
the inner tanks by dispensing a drop of water from the water spout (#10).
Getting Started
English

15
User Guide and Maintenance
English