ECOVACS ROBOTICS DEEBOT OZMO 610 User manual

Product review guide
DEEBOT OZMO 610
What DEEBOT OZMO 610 brings you?
A vacuum & mop combo cleaning device with advanced OZMO mopping system:
Vacuum & mop in one go so that you don’t need to do the cleaning twice. With advanced OZMO
mopping system, the robot equips with an electronically-controlled water pump consistently draws
water from a large reservoir to initiate mopping process. What’s more, the robot has sensors to
automatically switch to mopping mode or regulate water flow to dampen the cloth, so as to
guarantee a safe and deep clean. You can save time in the cleaning process by no need to refill
the water tank. In this case, the robot is convenient for you as water is enough for normal home
environment.
Clean in the most efficient way with Smart Cleaning Path:
The Smart Cleaning Path ensures that the robot can follow an advanced, back-and-forth cleaning
pattern for a more thorough and systematic clean, so your floor will be handled with optimized
clean.
Tackle different needs:
Suction method can be changed depending on your needs with DEEBOT OZMO610. The direct
suction inlet is perfectly suited to collecting hairs without tangling or you can also make use with
main brush to achieve greater lift, especially on carpets. The robot is designed for your different
needs.
Before you activate the DEEBOT, please pay attention to:
Allow at least an 8 cm (3.1") height
to clean under furniture without
complications.
Make sure that the tasseled
edges of carpets are folded under
themselves before activate the
robot.
Assist DEEBOT at its first time of
cleaning.

Product review guide
DEEBOT OZMO 610
Now you are ready to set up DEEBOT!
Ensure DEEBOT Anti-Drop Sensors
is on to detect the drop off. It may
need a physical barrier at the edge to
do so.
Don’t block DEEBOT in narrow
spaces, such as hallways.
Remove cords & small objects
from the floor that could entangle
the product.
(1) Place the Charging Dock on a level floor surface
and keep the immediate area 1.5m (5') in front of
the charger and 0.5m (1.6') on both sides of the
charger clear of objects and reflective object
surfaces. Plug the Charging Dock in.
(2) Remove the protective strip from the robot’s
bumper before use.
(3) Install Side Brushes: attach Side Brushes to the
bottom of DEEBOT by pressing a brush into each
slot with the matching color until it clicks.
(4) Power on: Open the robot’s Top Cover. Turn
the robot's Power Switch to the ON position.
DEEBOT is powered ON when DEEBOT emits a
musical sound and the AUTO Mode Button stays
illuminated.
(5) Charging before use: charge the DEEBOT 4
hours with the button in power on mode.

Product review guide
DEEBOT OZMO 610
Time to try our intelligent OZMO™mopping system!
(1) Draw out the water tank and release the cap to fill in water with the cap covered after the
filling process.
(2) Paste the mopping cloth onto the plate and attach it to the water tank, then put the water
tank into the DEEBOT.
(3) It is important to fold the tasseled edges of the carpet before activating the DEEBOT to
avoid wrong functioning.
(6) Start the DEEBOT: activate the DEEBOT by
directly pushing the button on its surface.

Product review guide
DEEBOT OZMO 610
(4) Now you are ready to acitviate the DEEBOT by the remote control or pushing the “Auto”
button.
You can also control your DEEBOT via your mobile remotely:

Product review guide
DEEBOT OZMO 610
For IOS system: For Android system:
(1) Open your ECOVACS App on your phone
and press “add the robot” button to select
your robot model on your ECOVACS
application.
(2) Make sure that your phone is connected to
the WIFI network on your home router.
(3) Open the robots’ main panel and turn on the
power switch, and press the reset button.
(4) After the robot beeps once, press “start
setup”.
(5) Press “go to connection settings” button on
the app interface and connect to “ECOVACS”
WIFI network in your phone settings.
(6) After hearing the indicator sound from the
robot, return to the App.
(7) When the connection is completed, the
screen will show “Setup completed”, then
press “complete” button.
(8) Now you can enter the next page of App
interface to control your robot.
Video tutorial on the App connecting:
http://bit.ly/2nlvNhg
(1) Open your ECOVACS App on your phone and
press “add the robot” button to select your
robot model on ECOVACS application.
(2) Make sure that your phone is connected to the
WIFI network on your home router.
(3) Open the robots’ main panel and turn on the
power switch, and press the reset button.
(4) After the robot beeps once, press “start setup”.
(5) If you allow the EOCVACS App to receive your
location, you can connect to your ECOVACS
robots immediately via your home WIFI.
(6) If you don’t want to share your location
information with the ECOVACS App, go to
your phone’s network WIFI settings and
directly connect with your robot’s WIFI.
(7) After hearing the indicator sound from the
robot, return to the App.
(8) When the connection is completed, the screen
will show “Setup completed”, then press
“complete” button.
(9) Now you can enter the next page of App
interface to control your robot.
Video tutorial on the App connecting:
http://bit.ly/2DNKT9P

Product review guide
DEEBOT OZMO 610
Don’t panic and we are prepared for you, if:
1. DEEBOT meets an obstacle, like furniture?
DEEBOT has an active obstacle detection system to help it avoid striking into your furniture, walls
and household items. When Anti-Collision Sensors detect an obstacle, a signal will be sent to
DEEBOT’s “brain” to slow down, change direction and select a new cleaning path. If the object is
very low to the ground, 1.5” or smaller in height, DEEBOT may gently touch the obstacle with its
mechanical cushion bumper before turning around.
2. DEEBOT is not cleaning along edges and in corners thoroughly?
Please choose Edge Cleaning Mode to clean along edges and in corners effectively.
3. DEEBOT can be used to vacuum water?
No. Do not allow DEEBOT to vacuum liquid as it will damage the unit. If it accidentally vacuums
the liquid, switch OFF the robot immediately, remove the Dust Bin, Filters, Main Brush and suction
component and allow them to dry completely before reinstalling them.
4. My home has two decks. Is there chance that DEEBOT could fall while cleaning the
second floor?
All of our robots come with Anti-Drop Sensors, so they will not fall from the edge but it may need a
physical barrier at the edge to keep itself from falling over.
5. The barrier of my bathroom is 1cm. Will the robot be able to cross over?
Under normal circumstances, our robots should be able to cross barriers within 1cm height.
If you have more questions during reviewing the product, please don’t hesitate to contact
ECOVACS local PR team:
LOCAL PR AGENCY NAME
Contact name:
Email:
Phone:
#DoMoreOfWhatYouLove with ECOVACS DEEBOT！