Ecozy IM-SS440A User manual

7
ecozy
ICE
MAKER
IM-SS440A | 44lbs
User Manual
hal read these instructions i
апа we strongly recommend that you keep them in a safe place for future reference.

Thank you for purchasing from ecozy.
If you have any questions or need further assistance,
please contact us at
[email protected]
or call и via hotline
[phone] (UTC 14:00-22:00, Monday to Friday).

CONTENTS
IMPORTANT SAFETY INSTRUCTIONS -+
PACKAGE CONTENTS
PRODUCT OVERVIEW -+
Ice Maker -
Control Panel апа LED Display -+
BEFORE FIRST USE
USE YOUR СЕ MAKER -+
АЙа Water -
Start/Stop Making Ice
Adjust Ice Cube Size -
Countdown
Ice Full Reminder -
Self-cleaning Mode
Water Drain -
SPECIFICATIONS
TROUBLESHOOTING

IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock, ог injury during ice-making operation,
always read carefully and obey all safety information.
ALL SAFETY INFORMATION WILL FOLLOW THE SAFETY ALERT
SYMBOLS BELOW
B o
B
b
®
SAFETY PRECAUTIONS
You need to follow these
instructions and execute.
Read and follow these
instructions.
Use this ice maker only for its
intended purpose as described
in this user manual
Do not use other liquid to make
ice cubes other than water.
If the supply cord 5 damaged,
it must be replaced by the
manufacturer ог its service
agent ога similarly qualified
person in order to avoid a hazard.
Do not turn the ice maker upside
down ог tilt it more than 45° during
transportation or use. If it happens,
let it stand upright for at least one
hour before plugging in апа using
it again.
| ©
A
@
A
>
PROHIBITED MATTERS
Prohibit these operations;
otherwise, it will cause danger.
Plug the ice maker into а grounded
3 prong outlet with 110~120/60Hz
power supply.
Itis suggested to put the ice maker
in a cool апа ventilated place, which
will greatly improve the ice
producing capacity.
Unplug the ice maker before
cleaning, repairing ог servicing.
Do not use flammable liquid to
clean the ice maker.
Place this ice maker away from direct
sunlight апа make sure that there 15
at least 6 inches(15 ст) о! free space
between all sides of your ice maker
апа surrounding objects.
01

B>
A
A
Keep flammable materials апа
vapors, such as gasoline, away
from the ice maker.
Do not use an extension cord.
Packaging materials can be
dangerous for children. There 15 а
potential risk of suffocation! Keep
all the packaging materials away
from children.
То avoid а hazard due to instability
of this ice maker, it must be placed
оп ап even ог flat surface.
PACKAGE CONTENTS
Ice Maker х 1
User Manual x 1
%)
@
Ice Shovel x 1
Do not remove е ground prong. This
ice maker must be properly grounded.
Never plug the power cord into а
receptacle that is not grounded well
and not in accordance with local and
national codes.
Children should be supervised to make
sure that they do not play with the
appliance.
Do not place the power cord over
carpets, rugs, etc.
Do not cover the cord and do not
submerge it in water.
Ice Basket(pre-assembled) x 1
Quick Guide x 1
* If there 15 any part missing, please contact our customer service: [email protected]

PRODUCT OVERVIEW
Ice Maker
Water Inlet Opening
Transparent Cover
Water Supply Pipe
Evaporator
Water Tank
Ice Basket
Control Panel
Аг Outlet
(Do ot block)
LED Display
Water Drain Plug — — — — —) ®
Ice Shovel
Control Panel and LED Display
03

ON/OFF Button
® Start or stop making ice
® During the process of ice-making, press апа hold this button Юг 5 seconds to do a
forced ice harvest
TIMER Button
® 5ега timer to automatically stop making ice ог start making ice
® Press апа hold this button for more than 5 seconds to enter self-cleaning mode
TIME +Button
Increase the time duration for making ice
TIME - Button
Reduce the time duration Юг making ice
©
©
Ф
@
Ice-making Status Self-cleaning Mode
Ambient Temperature &
Ice-making
Countdown
ON/OFF
Status
Timer
Setting
апа
Ice-
making
Time
Duration
Error
Code
No
Enough
Water
Ice Full Reminder
Warning

BEFORE FIRST USE
@ Unpack the ice maker, then remove all the packaging materials.
@ Clean the interior of the ice maker, the ice basket апа the ice shovel with warm water ап а soft
cloth for 3-5 times to remove possible odor ог residue caused by the manufacturing ог
transportation.
@ Place the ice maker on а level surface in а location where your ice maker 15 protected from direct
sunlight апа other sources о heat (such as а stove, furnace, or radiator).
No sunlight
and
heat sources
Р
ои
Оп а level surface
Reduce vibration апа noise
@ Make sure 10 leave at least 6 inches(15 ст) clearance оп all sides of the ice maker Юг proper
а! circulation.
15 ст
- Ginches
ст
Ginches Ра
—
© вейоге plugging in, please let the ice maker stand upright Юг 1 hour to allow the refrigerant to
settle.
05

@ Plugthe ice maker into а well-grounded outlet.
Must be grounded well.
DANGER!
Improper use of the plug may result in the risk оЁ
electrical shock.
USE YOUR ICE MAKER
Add Water
After plugging in, the ice maker i геаду to make ice cubes апа the LED display lights up. The indicator
% оп the LED display keeps flashing because there is no water in the water tank. Please add at least
Lliter of water т апа then the indicator (%] will be offin about 3 minutes.
|
Keep Flashing
Note:
Please Р the water tank with clean drinking water.
Start/Stop Making Ice
1. Press @) tostart making ice with the default time. The indicator ай, оп the LED display starts
rotating, Press (@) again to stop making ice.
06

2. During е process of ice-making, you can press апа hold @) for 5 seconds to do а forced ice
harvest.
Note:
If the ice maker 15 shut down within 5 minutes, please wait at least 5 minutes to restart the ice
maker.
Adjust Ice Cube Size
When the ice maker is running, the size of ice cubes can be adjusted by increasing ог reducing the time
duration for making ice. Firstly, press @) ог (@) to start; the letter М starts flashing оп the LED display.
Secondly, press @ ог @ again to set a desired time duration Юг making 1се.
You can increase ог reduce аё most 6 minutes based оп the default time. The longer time duration оЁ
ice-making, the larger size of ice cubes, апа vice versa. The ice maker will work according to the new
setting оп the next cycle.
Letter M keeps flashing, indicating
you can adjust the time duration.
Tip:
Depending оп the ambient апа water temperature, the ice-making cycle may last for 13 10 25
minutes. For the first-time use, ice-making period may take longer than usual but less than 35
minutes.
07 Ина

Countdown
During the process of ice-making, the LED display will display а countdown, telling you the remaining
time of the ice-making cycle. When the countdown ends, the ice harvest starts.
10 minutes countdown
Timer
You can set a timer 10 automatically 5юр making ice when the ice maker is running, or to automatically
start making ice when the ice maker s 0. Firsty,press [ to start; the letter Н starts flasing оп the
1Ер display. Secondly, press @ ог @ to select the time duration from 1 hour to 24 hours.
®
®
H Keeps Flashing
Tip:
Press the button [& againto cancel the timer seting.
Ice Full Reminder
The indicator @ will light ир when the ice sensor detects the full basket. Please remove the ice cubes
from the basket in time, then the ice maker will resume working.
Т Ice Sensor
Lights ир
08

Self-cleaning Mode
When the ice maker is not making ice, you can press апа hold @ for 5 seconds to enter the self-
cleaning mode. The indicator € keeps flashing. This process takes about 20 minutes.
20 minutes countdown
Tip:
This mode can be manually terminated by pressing (@) atany time.
Water Drain
After the ice maker finishes the ice-making, you can take out the сар оп the water drain plug to drain
the water in the tank.
&
Note:
Please make sure the ice maker is powered on; otherwise, the water in the tank cannot be drained
completely.
09

Tips:
* Itis better 10 change the water every 24 hours.
® If the ice maker is not in use, please clean it and dry all the parts of it.
® Please use clean drinking water. Please do not use beverages including sparkling water апа
coke, which may cause the pipes to be clogged.
SPECIFICATIONS
Model IM-SS440A
Power Supply 115V/60 Hz
Ice Making Rated Current 22A
Ice Harvest Rated Current 25A
Refrigerant R290 1.130z/32g
System Pressure High Side: 260psig/Low Side: 88psig
Net Weight
20.9 165 (9.5kg)
Dimensions(H х W х D) 9.9714.2"14.6in. (252 х 360 х 371mm)
Enclosure Stainless Steel
10

TROUBLESHOOTING
Issue Possible Cause(s) Solution
P Please add а! least 1 liter о water in апа
ЁЁ lights up No enough water then е indicator & will be оЁ in about
3minutes.
ё lights ир basket
Too many ice cubesin е
Remove the ice cubes from е basket.
Ambient temperature
sticking together too long
Е1 lights ир й Contact our customer service.
sensor malfunctions.
й Water temperature sensor
Е2 lights ир егсетре зепзо Contact our customer service.
malfunctions.
1се cubes аге The time of ice-making 15
Reduce the ice-making time.
too high
Ambient temperature is
Move the ice maker to another cool place.
Ice cubes are thin high
Water temperature is too The water temperature should be no
more than 25°C(77°F).
too short
The time of ice-making is
Increase the ice-making time.
Ice-making cycle is
й ice cubes
normal, but no ice
Itis not the time 0 form the
For the first-time use, the ice-making
cycle may take longer; please wait
patiently.
ice-making process
cubes are formed
Refrigerant leaks Contact our customer service.
The water flows
slowly in the supply | Wateris frozen in the Just wait for a while; the water will be
pipe during supply pipe automatically melted.
If there is any issue unresolved, please contact из at: [email protected].
11

€.
5o
Intertek
3149457
Conforms to UL STD.563
Certified ю CSA STD.C22.2
No120