ED Ellen DeGeneres 1656VA-60-241-900-SR User manual

BATH.EDBYELLEN.COM

ED is Ellen DeGeneres’ iconic style, values and personality shared through
collections of beautifully designed, high-quality products for home, pets and
people. All ED merchandise design and materials are approved by Ellen, ensuring
it maintains her standards and upholds her promise to make each item feel
like a personal connection between herself and consumers around the world.
INTRODUCTION
WELCOME

3
ATTACH YOUR RECEIPT HERE
Serial Number__________________ Purchase Date__________________
ITEM #3650521; 3650522; 3650523; 3650524;
3650525; 3650526; 3650527; 3650528
MODEL # 1656VA-60-241-900-SR; 1656VA-60-241-900-UM;
1656VA-60-241-907-SR; 1656VA-60-241-907-UM;
1656VA-60-247-900-SR; 1656VA-60-247-900-UM;
1656VA-60-247-907-SR; 1656VA-60-247-907-UM
60-IN VANITY
WITH TOP
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-855-571-1044, 9 a.m. - 5 p.m., EST, Monday - Friday.
OR
OPTION 1
(Semi-Recessed Sink)
OPTION 2
(Undermount Sink)
1656VA-60-241-900-SR ED 60-IN GREENWELL WHITE OAK VANITY W/ SEMI-RECESSED CARRARA MARBLE TOP
1656VA-60-241-900-UM ED 60-IN GREENWELL WHITE OAK VANITY W/ CARRARA MARBLE TOP
1656VA-60-241-907-SR ED 60-IN GREENWELL WHITE OAK VANITY W/ SEMI-RECESSED ENGINEERED WHITE TOP
1656VA-60-241-907-UM ED 60-IN GREENWELL WHITE OAK VANITY W/ ENGINEERED WHITE TOP
1656VA-60-247-900-SR ED 60-IN GREENWELL CASHMERE VANITY W/ SEMI-RECESSED CARRARA MARBLE TOP
1656VA-60-247-900-UM ED 60-IN GREENWELL CASHMERE VANITY W/ CARRARA MARBLE TOP
1656VA-60-247-907-SR ED 60-IN GREENWELL CASHMERE VANITY W/ SEMI-RECESSED ENGINEERED WHITE TOP
1656VA-60-247-907-UM ED 60-IN GREENWELL CASHMERE VANITY W/ ENGINEERED WHITE TOP
MODEL NUMBER DESCRIPTION

4
Package Contents...........................................................................................................................5
Hardware Contents..........................................................................................................................5
Safety Instructions...........................................................................................................................5
Preparation ....................................................................................................................................6
Assembly or Installation Instructions .............................................................................................6
Care and Maintenance .................................................................................................................14
Warranty ......................................................................................................................................14
Replacement Parts List ...............................................................................................................15
Package Contents.........................................................................................................................17
Hardware Contents........................................................................................................................17
Safety Instructions.........................................................................................................................17
Preparation ..................................................................................................................................18
Assembly or Installation Instructions ...........................................................................................18
Care and Maintenance .................................................................................................................26
Warranty ......................................................................................................................................26
Replacement Parts List ...............................................................................................................27
TABLE OF CONTENTS FOR OPTION 1 (Semi-Recessed Sink)
TABLE OF CONTENTS FOR OPTION 2 (Undermount Sink)

5
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
PACKAGE CONTENTS (Semi-Recessed Sink)
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• There are several assembly steps, including unpacking, that require two adults.
CAUTION
• Follow these instructions closely, take your time, and use care while assembling this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PART DESCRIPTION QUANTITY
A Vanity 1
B Top 1
C Backsplash 1
D Sink 2
E
Left Door
(preassembled
to Vanity(A)) 2
F
Right Door
(preassembled
to Vanity(A)) 2
GFloor Plumbing
Cutout Lid 2
H Shelf 2
I
Upper Drawer
(preassembled
to Vanity(A))
2
J Drawer Divider 4
L Center Support Leg 1
O Sink Template 2
K
Lower Drawer
(preassembled
to Vanity(A))
1
CARTON
Box 2 of 3
Box 2 of 3
Box 1 of 3
Box 1 of 3
Box 3 of 3
A
E
G
G
H
H
I
I
J
L
JJJ
K
F
C
B
D
D
Sink Template
O
Sink Template
O
AA
Touch Up Pen
Qty. 1
Handle (2 Options)
Brushed Nickel (Qty. 8)
Matte Black (Qty. 8)
BB CC
Shelf Pin
Qty. 8

6
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit, measuring tape, level
BB
Hardware Used
Handle x 8
2. With 2 people, place the vanity on its back on
a flat, scratch free surface. Locate the center
support leg (L) and screw into the base of the
vanity. Once complete, lift the vanity back up
into the upright position.
A
E
FE
I
K
F
1
1
2
3
BB
2
L
AL
1. One of the handles (BB) is attached to the inside
of doors (E & F) and the other set is packaged
separately in the box. Use the attached string to
open the doors initially. Unscrew the handle (BB)
and attach your preferred handle to the outside
of doors (E & F), as illustrated in the diagram.
Repeat the same step for the drawers (I & K).
Note: This vanity base comes with two
different door/drawer handle options.

7
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
3. With two people, carefully place vanity (A)
against the wall in its final location.
While holding the vanity base firmly against the
wall, use the pre-assembled levelers on the
bottom of each leg of the vanity (A) to level the
item. Twisting the levelers counterclockwise
will raise the height of the vanity (A), and
twisting them clockwise will lower the vanity.
Once the vanity is in place, against the wall,
and level from front to back and side to side,
drill a hole through the vanity mounting area
and into the wall studs (as illustrated in
diagram 3). Using appropriate mounting
hardware (not included), secure the vanity (A) to
a wall stud. If possible, secure the vanity (A) to two wall studs for increased stability.
3
12
A
4. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
up onto a scratch free surface such as a
foam sheet that came in the packaging.
4
Remove the top foam sheet
Foam sheet
C
C
Remove the backsplash and place
it on a scratch free surface
Remove the foam sheet
B

8
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
Note: A
t this stage it may be easier to install
the faucet and drain kit (not included) to top (B)
per the manufacturer’s instructions, before
moving on to Step 5.
5.
Apply stain free silicone caulk (not included) to
the top edge of vanity (A). With the help of
another adult, gently lower top (B) onto the
vanity (A). Wipe away any excess caulk with a
soft cloth, and wait approximately 24 hours for
it to dry.
6. Put the sink template (O) on the top (B).
The holes in the cardboard needs to be
aligned with the hole in the stone top.
Make sure the sink template and stone top are
flush along the back edge.
Repeat for the remaining sink template.
5
1
2
2
A
B
6
Sink Template
O
Sink Template
O
B

9
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
7. Apply a thin bead of silicone caulk (not included)
onto the stone top close to the edge of the sink
cut out as pictured.
Repeat for the remaining stone top.
8. With the help of another adult, Gently lower
the sink onto the stone top using even
pressure to set the sink properly.
Make sure the sink over-flow hole is at the
front of wood cabinet.
If some silicone caulk has over-flowed please
clean it up at that time with water.
Repeat for the remaining sink.
7
Sink Template
B
O
Sink Template
O
8
B
D
Sink Template
D
Sink Template

10
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
9. Apply silicone caulk (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess caulk before allowing
to dry.
10. The back of the vanity is open for accessibility
for drain(s) and water line(s) hookup. If your
plumbing comes out of the back wall, insert
the floor plumbing cutout lid (G), as shown in
Illustration 10. This will close the hole and
increase your storage space.
If your plumbing comes out of the floor, this
hole provides accessibility for drain and water
line hookup.
9
1
22
C
B
10
G
A
G
G

11
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
12.
If you need to adjust the doors, do so in the following manner.
To adjust door up or down, loosen screws (a) on both hinges, adjust door, and retighten screws.
To adjust door left or right, turn screws (b) on both hinges, in and out.
To adjust door in or out, loosen screws (c) on both hinges, adjust door, and retighten screws.
11. Screw shelf pins (CC) hand tight into the
threaded holes of vanity (A). Place shelf (H)
on top of shelf pins (CC).
Repeat for the remaining shelf (H).
CC
Hardware Used
Shelf Pin x 8
11
A
2
H
2
H
1
3
H
CC
12
2
33
2
2
2
a
1
1
1
2
2
b
1
1
c3

12
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
13. Insert two drawer dividers (J) into the notch of
drawers (I) inside.
14. As shown in the diagram, fully extend the
drawer and locate the plastic levers on the
metal glide tracks. Push the left-side and
right-side levers at the same time to
disengage the drawer from the drawer glides.
Gently lift the drawer up to remove it from
vanity (A).
13
J
J
I
14
A
2
1

13
INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
15. To reinstall drawer(s) into vanity (A), fully
extend metal glide tracks. Gently lower and
slide drawer box into rear glide catch. Next,
lower drawer box down to completely rest
on extended glides. Then, push plastic levers
to lock the drawer box in place.
Note: Drawer box alignment can be adjusted,
if necessary. As shown in the diagram, spin
the adjustment wheel to the left to raise the
drawer box, or to the right to lower the drawer
box. The left and right-side glide heights can
also be adjusted independently in order to find
the drawers best alignment position.
CAUTION
DO NOT force drawer or damage to glide(s) may
occur. If drawer does not slide in with ease,
remove and try again from the start.
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
per the manufacturers’ instructions to complete
the installation.
15
A
1
2
3

14
CARE AND MAINTENANCE
WARRANTY
IMPORTANT
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• The stone top can be cleaned using standard marble cleaning agents available at your local
supplier.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch; for worn areas,
stroke in direction of wood grain. Rub off excess colorant promptly with a soft cloth.
• Shade variations and patterns are an inherent characteristic of stone (e.g. granite, marble,
engineered stone). Stone tops will vary from product to product. Use caution placing items
such as soap or any fragranced material on the stone surface. Use a soap dish, coaster or
similar item to protect the surface if placing any soap or fragranced products on the stone.
• If soap or fragranced products come in contact with the stone top, rinse the surface with water
and dry using a soft non-abrasive cloth.
• WARNING: Must use cleaning agents safe for stone. Check your cleaning agents use
restrictions before using on any stone. Damage to the stone may result. Vanity Manufacturer not
responsible for damage caused by improper cleaning agents or soaps used. Warranty will not
cover damage caused by the use of improper soaps or cleaning agents.
• DO NOT use products to clean the stone top that contain acetone, lemon, vinegar or other
acids as these may cause damage to the stone surface.
• Periodically reseal the stone top using an appropriate stone sealer available from your local
home store. Follow the manufacturer’s directions on how to apply.
The manufacturer warrants this item against defects in materials and workmanship for a period of
one (1) year from the date of original retail purchase. This warranty applies only to the original
purchaser. This warranty does not apply to any damage on the product by accident, misuse, or
modified, improper installation or by affixing accessories not produced by the manufacturer. The
manufacturer will not be held liable for damages caused from cleaners or soaps that etch or stain
the stone top. The manufacturer is not accountable whatsoever for product installation during the
warranty period. There is no further expressed warranty. The manufacturer shall not be legally
responsible for incidental, consequential or special damages arising at or in connection with
product use or performance except as may otherwise be accorded by law. The manufacturer
disclaims any and all implied warranties.

15
REPLACEMENT PARTS LIST FOR 1656VA-60-241-SR (Semi-Recessed Sink)
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
E Left Door
D Sink
1656VB-60-241 DOOR SET
SN047B
C60" Pure White Backsplash PUBS-25-907-60
60" Carrara Marble Backsplash PUBS-25-900-60
BComplete Set 60" Pure White Top 3500VT-60-907
Complete Set 60" Carrara Marble Top 3500VT-60-900
F Right Door
1656VB-60-241-SHELF
241 FP LID
G Floor Plumbing Cutout Lid
H Shelf
1656VB-60-241-DIVIDERJ Drawer Divider
1656VB-60-241-C LEGL Center Support Leg
1656VB-60-241-
TOP DRAWER FRONT
M Upper Drawer Front
1656VB-60-241-
BOTTOM DRAWER FRONT
N Lower Drawer Front
AA Touch-up Pen OF-0010
O Sink Template SN047B-TEMPLATE
BB Handle-brushed nickel 1656-BN HARDWARE
Handle-matte black 1656-MB HARDWARE
CC Shelf Pin PU17-SP-002
DD Hinge SH-ABC-HINGES
EE Leveler T-1007
FF Glide Track Set SH-ABC-14IN-3A
AA BB CC DD EE FF
E
B
C
O
H
F
L
N
D
M
G
J
Sink Template Sink Template

16
REPLACEMENT PARTS LIST FOR 1656VA-60-247-SR (Semi-Recessed Sink)
For replacement parts, call our customer service department at 1-855-571-1044, 9 a.m. - 5 p.m.,
EST, Monday - Friday.
PART DESCRIPTION PART #
E Left Door
D Sink
1656VB-60-247 DOOR SET
SN047B
C60" Pure White Backsplash PUBS-25-907-60
60" Carrara Marble Backsplash PUBS-25-900-60
BComplete Set 60" Pure White Top 3500VT-60-907
Complete Set 60" Carrara Marble Top 3500VT-60-900
F Right Door
1656VB-60-247-SHELF
247 FP LID
G Floor Plumbing Cutout Lid
H Shelf
1656VB-60-247-DIVIDERJ Drawer Divider
1656VB-60-247-C LEGL Center Support Leg
1656VB-60-247-
TOP DRAWER FRONT
M Upper Drawer Front
1656VB-60-247-
BOTTOM DRAWER FRONT
N Lower Drawer Front
AA Touch-up Pen OX-0950
O Sink Template SN047B-TEMPLATE
BB Handle-brushed nickel 1656-BN HARDWARE
Handle-matte black 1656-MB HARDWARE
CC Shelf Pin PU17-SP-002
DD Hinge SH-ABC-HINGES
EE Leveler T-1007
FF Glide Track Set SH-ABC-14IN-3A
AA BB CC DD EE FF
E
B
C
O
H
F
L
N
D
M
G
J
Sink Template Sink Template

17
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
PACKAGE CONTENTS (Undermount Sink)
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• There are several assembly steps, including unpacking, that require two adults.
CAUTION
• Follow these instructions closely, take your time, and use care while assembling this vanity.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PART DESCRIPTION QUANTITY
A Vanity 1
B Top 1
C Backsplash 1
D Sink 2
E
Left Door
(preassembled
to Vanity(A)) 2
F
Right Door
(preassembled
to Vanity(A)) 2
GFloor Plumbing
Cutout Lid 2
H Shelf 2
I
Upper Drawer
(preassembled
to Vanity(A))
2
J Drawer Divider 4
L Center Support Leg 1
K
Lower Drawer
(preassembled
to Vanity(A))
1
CARTON
Box 2 of 3
Box 2 of 3
Box 1 of 3
Box 3 of 3
C
B
D
D
A
E
G
G
H
H
I
I
J
L
JJJ
K
F
AA
Touch Up Pen
Qty. 1
Handle (2 Options)
Brushed Nickel (Qty. 8)
Matte Black (Qty. 8)
BB CC
Shelf Pin
Qty. 8
GG HH II JJ KK
Lock Washer
Qty. 8
Nut
Qty. 8
Wrench
Qty. 1
Bolt
Qty. 8
Sink Bracket
Qty. 8

18
INSTALLATION INSTRUCTIONS (Undermount Sink)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Installation Time: 45 minutes (24 hours for silicone caulk to dry).
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone
caulk, power drill with drill bit, measuring tape, level
BB
Hardware Used
Handle x 8
2. With 2 people, place the vanity on its back on
a flat, scratch free surface. Locate the center
support leg (L) and screw into the base of the
vanity. Once complete, lift the vanity back up
into the upright position.
A
E
FE
I
K
F
1
1
2
3
BB
2
L
AL
1. One of the handles (BB) is attached to the inside
of doors (E & F) and the other set is packaged
separately in the box. Use the attached string to
open the doors initially. Unscrew the handle (BB)
and attach your preferred handle to the outside
of doors (E & F), as illustrated in the diagram.
Repeat the same step for the drawers (I & K).
Note: This vanity base comes with two
different door/drawer handle options.

19
INSTALLATION INSTRUCTIONS (Undermount Sink)
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
3. With two people, carefully place vanity (A)
against the wall in its final location.
While holding the vanity base firmly against the
wall, use the pre-assembled levelers on the
bottom of each leg of the vanity (A) to level the
item. Twisting the levelers counterclockwise
will raise the height of the vanity (A), and
twisting them clockwise will lower the vanity.
Once the vanity is in place, against the wall,
and level from front to back and side to side,
drill a hole through the vanity mounting area
and into the wall studs (as illustrated in
diagram 3). Using appropriate mounting
hardware (not included), secure the vanity (A) to
a wall stud. If possible, secure the vanity (A) to two wall studs for increased stability.
3
12
A
4. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
down onto a scratch free surface such as a
foam sheet that came in the packaging.
4
Remove the top foam sheet
Remove the foam sheet
Remove the cutout foam
sheet & hardware
Remove the top and place it
on a scratch free surface
Remove the backsplash and place
it on a scratch free surface
C
Foam sheet
C
B
BACK
FRONT
BACK
FRONT
B
BACK
FRONT
BACK
FRONT
Foam sheet
1
2
1
2
B
BACK
FRONT
BACK
FRONT
Hardware
Pack
Hardware
Pack

20
INSTALLATION INSTRUCTIONS (Undermount Sink)
5. Apply silicone caulk (not included) to
the top edge of sink (D). With the help of
another adult, lower the sink onto the back
side of the stone top.
Make sure the sink over-flow hole is facing
the front of stone top.
Be sure to align the sink well with the stone top
cut out allowing for equal stone overhang on the
front, back and sides of the ceramic sink (D).
Repeat for the remaining sink.
Note: To install the sink onto the top correctly,
ensure that the two "BACK" stamps on the sink
and the top are aligned on the same sides.
Use the guide lines marked on the sink and
bottom side of stone top to assist with sink
location.
Hardware Used
GG Bolt x 8
6. Screw bolts (GG) into the threaded holes of
stone top (B).
5
BACK
1
2
2
2
2
BACK
BACK
BACK
BACK
DB
Sink Lip
Top
BACK
BACK
6
GG
D
D
B
BACK
BACK
BACK
BACK