Eden Terra Nova Module User manual

4013.057 / CATS-70007-v01
IMPORTANT SAFETY INFORMATION
ENGLISH
Thank you for choosing EDEN. We hope
that this product provides you with years of
faithful service, the inspiration and capability
to take your music and express yourself in
your own way.
Your new Module preamp pedal is designed
to provide you with great tone and
performance and the ability to truly take
your tone anywhere.
EDEN equipment is designed to provide you
with years of faithful service. However, should
you ever need help with one of our products
we have dedicated support teams all over
the world. Visit your local EDEN dealer or
contact your regional distributor for more
details. Alternately visit our website to see if
you can find a solution www.edenamps.com.
Simple rules to remember:
DO: Keep your unit clean and free from dust
and obstructions to ensure adequate cooling
and maximum performance.
DO: Ensure you use the best quality cables
and connections when using your unit for
peak performance.
REMEMBER: Follow all the warnings and
instructions which are provided in this guide,
always keep this guide for future reference.
DON’T: Use this unit with any power cable or
cord that was not supplied by EDEN.
DON’T: Store liquids on or near the unit
during use or otherwise or store in an overly
humid environment.
DON’T: Modify of attempt to modify
your unit, there are no user serviceable
components inside. Any modification or
repair by an un authorised technician will
void any warrantee offered in your region
and can pose a serious risk of electrocution
or death.
DON’T: Use your unit for any purpose other
than for which it was intended.
EDEN has tested or had the unit tested
and approved for sale in your region. Any
markings of approval and or warning labels
on an EDEN product are provided to ensure
you as a user are aware of the efforts EDEN
go to ensure your product is suitable for use
in your country. If you have any concerns
about anything relating to your product then
please contact EDEN immediately. Please
check your individual unit for the relevant
markings and symbols which may apply.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding- type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with a cart, stand, tripod,
bracket, or other unit specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury from tip-
over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
anyway, such as power-supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
WARNING - To reduce the risk of fire or
electric shock, do not expose this apparatus
to rain or moisture. The apparatus shall not
be exposed to dripping or splashing objects.
Objects filled with liquids, such as beer
glasses, shall not be placed on the apparatus.
WARNING - The mains plug / appliance
coupler is used as a disconnect device,
the disconnect device shall remain readily
operable.
Class 1 apparatus must be earthed.
Class I apparatus shall be connected
to a mains socket outlet with a
protective earthing connection.
EDEN is part of Marshall Amplification. For more information or to find your regional EDEN distributor visit our website www.edenamps.com
Eden Amplification, Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ , ENGLAND - [phone] - [email protected]om
WHAT IS THE MEANING OF THIS?
The exclamation point, within an
equilateral triangle, is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature.
WHAT IS THE MEANING OF THIS?
The lightning ash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufcient magnitude to constitute a risk
to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS RISQUE CHOC ELECTRIQUE
NE PAS OUVRIR
This information is available in other languages.
Cette information est disponible dans d’autres langues.
Diese Information ist auch in weiteren Sprachen verfügbar.
Esta información también está disponible en otros idiomas.
Queste informazioni sono disponibili in diverse lingue.
この情報は、他の言語で提供されています。
此信息也可在其他语言版本。
www.edenamps.com/module.html

EDEN is part of Marshall Amplification. For more information or to find your regional EDEN distributor visit our website www.edenamps.com
Eden Amplification, Denbigh Road, Bletchley, Milton Keynes, MK1 1DQ , ENGLAND - [phone] - [email protected]om
1. Mute footswitch: Use this footswitch to
mute/un-mute the pedal.
2. Enhance footswitch: Use this footswitch to
turn the Enhance feature on/off.
3. Loop footswitch: Use this footswitch to
include/bypass the effects loop.
4. Active Input: Plug in your active or high
output bass here.
5. Passive Input: Plug in your passive or low
output bass here.
6. Compressor Switch: Use this switch to
turn the built in compressor circuit off
and on.
7. Input Gain: Use this control to adjust the
amount of signal sent into the preamp
stage. Use in conjunction with the Input
Gain clip light to avoid clipping the input
stage of the pedal.
8. Input Gain Clip Light: When illuminated
this LED shows clipping is occurring in
the preamp. To prevent this either turn
down the output of your instrument, or
dial the Input Gain to a lower setting.
9. Enhance: The Enhance circuit provides
an easy-to-use EQ sweep, allowing you
to simultaneously boost very low bass,
upper middle and high frequencies,
while cutting the lower mid frequencies.
Quickly find your sound before adjusting
the finer EQ details. For best results use
the Enhance control with all other EQ
settings at 12 O’clock before detailing
your tone.
10. Bass: Adjust the low frequencies of the
pedal using this control.
11. Bass Boost Switch: Use this switch to
turn on the Bass Boost feature on the
pedal. When engaged the Bass control
will provide more pronounced Bass
adjustment.
12. Bass Boost Light: When illuminated this
LED indicated the Bass Boost feature is
turned on.
13. Low Mid Control: Change the amount
of frequency adjustment by the Low Mid
Freq Sweep using this dial.
14. Low Mid Freq Sweep: Adjust the
frequency affected by the Low Mid
control from 30 Hz up to 300 Hz using
this control.
15. Hi Mid Level Control: Adjust the
frequency affected by the Hi Mid Freq
Sweep using this control.
16. Hi Mid Freq Sweep: Adjust the frequency
affected by the Hi Mid Level control from
200 Hz up to 2000 Hz using this control.
17. Treble: Adjust the highest frequencies on
the pedal using this control.
18. Master: Use this control to adjust the
overall output volume of the pedal.
19. Master Clip Light: This LED will illuminate
if anything causes the output to clip.
20.Logo: This logo will illuminate when the
pedal is switched on.
UNIT DIAGRAM - FRONT PANEL
1. Power Inlet: Plug your supplied power
cord into your pedal using this mains
inlet socket.
2. DC Polarity Switch: Use this switch to
change the polarity of the pedal. To
use the supplied Eden 15V power unit
ensure the switch is set to centre positive.
Your pedal is suitable for use with power
supplies up to 18V.
3. Output (Left): Take your left signal output
to external equipment here.
4. Output (Right): Take your right signal
output to external equipment here.
5. Aux In: Connect an external device using
a 3.5mm jack cable here.
6. Headphone Out: Connect your
headphones here using standard 3.5mm
headphone cable.
7. DI Ground Lift: Lift ground from your
signal (when required) using this switch.
8. DI Pad: Pad the signal (reduce the
output level) between line level and mic
level using this switch.
9. DI Pre / Post Select: Choose to take the
DI signal from either before or after the
preamp shaping circuit inside the pedal.
10. DI Output: Connect to either a mixing
desk, front of house system or recording
device using a standard XLR cable.
11. Loop Send: Take your signal to your
external effect loop or outboard
equipment from here.
12. Loop Return: Return your signal from
any outboard equipment or effect loop
here.
13. Tuner Out: Take your tuner signal out
from this socket.
UNIT DIAGRAM - BACK PANEL
TREBLE
-15 +15
165
30 300
1.1K
200 2K
BOOST
COMP
CLIP
INPUT
GAIN
CLIP
ENHANCE
PASSIVE ACTIVE
LOW MID
-15 +15
HI MID
-15 +15
BASS
-15 +15
MASTER
BASS PREAMP PEDAL
MUTE ENHANCE LOOPMUTE ENHANCE LOOP
1 2 3
4
5
6
7 9
8
10
11
13
12
14
15
16 17
18 19 20
PRE/
POST
DI OUT
LEVEL
TUNER
SEND
RETURN
AUX IN
PHONES
OUTPUT (L)
OUTPUT (R)
DC
POLARITY
DI OUT
15-18V DC IN
GND
LIFT
1
2
3
45
6
7 8 9
10
12
11 13