4
Recorder’s Functional Testing
Trial recording. Keep 1 button pressed for about 2
seconds. When the recorder starts recording, the
LED ashes ve times. To stop the recording, keep
1 button pressed for about 2 seconds. When the
recorder stops recording, the LED ashes once.
The duration of the last ash can be a dozen
seconds depending on the recorder’s memory size.
While recording, the sequences of LED ashes
show the charge of the battery and free memory
size (see Operational Manual on the shipped CD
for more details).
To play back the recording upload the recording
onto a hard drive with the help of “Rec Manager”
program (on the shipped CD).
Battery Charging
The recorder will start charging automatically
when connected to USB-connector by the shipped
USB-cable. While charging, the recorder’s LED is
ashing gradually with a ve-second interval. After
the rechargeable battery is fully charged, the LED
will ash without intervals.