Edimax HP-5102 User manual

500Mbps Nano PowerLine Adapter
Transmit Network Data via Existing Electrical Wires
The Edimax HP-5102 transforms the existing electrical wires in your home or office into a high-speed network.
Complicated, disruptive and unsightly cabling is no longer necessary - if your home or office doesn’t have an
existing Ethernet cable infrastructure, the HP-5102 enables you to create a network environment easily and
cost-effectively.
500Mbps HomePlug AV Standard & IGMP Support
The Edimax HP-5102 not only complies with the HomePlug AV standard but also supports IGMP managed
multicast streams. The HP-5102 can transmit network data over existing electrical wires at speeds of up to
500Mbps. It is also backward compatible with the 200Mbps HomePlug AV standard and has a transmission
range of up to 300 meters. IGMP can be used for online gaming and video streaming applications, and allows
for more efficient use of network resources. With the HP-5102, you can transfer high-definition video and
digital audio quickly and easily.
Compatible with HomePlug 1.0 & 1.0 Turbo Devices
The HP-5102 is designed to ensure efficient coexistence with HomePlug 1.0 and 1.0 Turbo devices, providing
guaranteed QoS to all devices present in a heterogeneous powerline network. In such an architecture, the HP-
5102 and other HomePlug 1.0 stations share the CSMA/CA allocations, thus providing fair access to HomePlug
1.0 stations based on traffic priority.
Hardware Combo Group/Reset Button
The Edimax HP-5102 has a combo group/reset button for simplified group and reset configurations. Press the
group/reset button and the HP-5102 will help you set up a password for your network automatically, or reset
the device to factory defaults.
Key Features:
•Easy plug-n-play setup and 128 bit AES security
•Maximum powerline speed up to 500Mbps
•Backward compatible with 200Mbps powerline adapters
•Features energy saving mode to reduce power consumption
•Utilizes existing electrical wires to transmit network data
•Powerline transmission range up to 300 meters
HP-5102
www.edimax.com
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.

www.edimax.com
TECHNICAL SPECIFICATIONS
Hardware Standards Effect Data Rate
1 x Power jack
1 x 10/100Mbps Ethernet LAN port
1 x Group/Reset button
LED indicators: power, Ethernet, powerline
IEEE 1901
IEEE 802.3
IEEE 802.3u
TCP: Up to 95 Mbps effective throughput
UDP: Up to 95 Mbps effective throughput
Frequency Band Modulation Schemes Operating Range
2-68MHz (with Mask) OFDM symbol modulation on line
synchronization 1024/256/64/16/8-QAM,
QPSK, BPSK, ROBO modulation
Up to 300 meters
QoS Nodes IGMP
4 levels priority based contention access,
and multi segment bursting
8 levels VLAN priority field, TOS field
QoS classification by destination MAC
address and IP port
Up to 15 slaves with 1 master, 16 total
devices
Max 8 bridged devices per station
Support for IPv4/IGMPv1,v2,v3 snooping
Support for IPv6 and MLDv1, v2 snooping
Max 16 source addresses and group
members
IC / Memory Security Temperature & Humidity
AR7420+1540
1MB Flash
8MB SDRAM
128-bit AES link encryption with key
management
0-45 degrees Celsius
10-90% (non-condensing)
Power Source / Power Consumption Dimensions & Weight Certification
100-240V AC, 50-60Hz
4W
67 x 50 x 32mm
109g
CE, FCC, LVD
NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
•Plug a HP-5102 into a power outlet and connect it to a broadband router.
•Plug another HP-5102 into a power outlet and connect it to a computer's
Ethernet port to establish a powerline connection.
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum performance, actual data rates, and coverage will vary depending on network
conditions and environmental factors. Product specifications and design are subject to change without notice.
500Mbps Nano PowerLine Adapter
HP-5102