EEPD PROFIVE NUCE V2718 Quick user guide

PROFIVE® NUCE_C 25 W – Hardware Reference Manual – P – Rev. 1
Copyright ©2020|2021 E.E.P.D. GmbH. All rights reserved.

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
1
10/2021 Revision 1.7
Manufacturer
E.E.P.D. Electronic Equipment Produktion & Distribution GmbH
Gewerbering 3
85258 Weichs
Phone: [phone] – 0
Fax: [phone] – 109
Web: https://www.eepd.de
E-Mail: [e-mail]
10/2021 Revision 1.7
General Notes
This user manual is for your information.
The information contained herein has been checked carefully and is believed
to be reliable. However, E.E.P.D. GmbH gives no guarantee or warranty
concerning the accuracy of spoken information and shall not be responsible
for any loss or damage of any nature resulting from the usage of or from
reliance upon it.
We are thankful for all suggestions or improvements at any time.
E.E.P.D. GmbH reserves the right to make changes in the products or
specifications, or both, at any time without notice.
General Notes

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
2
10/2021 Revision 1.7
Copyright Notice
Copyright©2020|2021 E.E.P.D. GmbH. ALL RIGHTS RESERVED!
E.E.P.D. GmbH copyrights this document. You may not reproduce, transmit,
transcribe, store in a retrieval system, or translate into any language, in any
form or by any means, or otherwise, any part of this publication without the
express written permission of E.E.P.D. GmbH.
Trademark Acknowledgement
AT, DOS, OS/2, VGA are registered trademarks of International Business
Machines Corporation.
Intel, Pentium and Atom are registered trademarks of Intel Corporation.
Panel Link and TMDS are registered trademarks of Silicon Image, Inc.
VESA is a registered trademark of Video Electronics Standard Association.
Windows 10/ 11 is a registered trademark of Microsoft Corporation.
PROFIVE® and E.E.P.D.® are registered trademarks of E.E.P.D. Electronic
Equipment Produktion and Distribution GmbH.
All rights reserved. All other mentioned trademarks are registered
trademarks of their owners.
Disclaimer
This document is provided for the general information of the customer. It
describes the general functionality of the board and is not considered as
assured characteristics. The written declarations in this document are not
constituent part of any contract.
E.E.P.D. GmbH reserves the right to modify the information contained in this
document as necessary and the customer should ensure that he has the most
recent revision of this document.
E.E.P.D. GmbH makes no warranty for the use of its products and bears no
responsibility for any errors, which may appear in this document. The
customer should be on notice that the field of personal computers is the
subject of many patents held by different parties. Customer must ensure that
they take appropriate action so that their use of the products does not infringe
upon any patents. It is the policy of E.E.P.D. GmbH to respect the valid patent
rights of third parties and not to infringe upon or assist others to infringe upon
such rights.
E.E.P.D. GmbH assumes no responsibility for circuits, descriptions and tables
within this document as far as patents or other rights of third parties are
concerned.
Life Support Applications
E.E.P.D. GmbH products are not intended for using as critical components in
life support appliances, devices or systems in which the failing of an E.E.P.D.
GmbH product could be expected to result in personal injury.
General Notes

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
3
10/2021 Revision 1.7
FCC and CE Disclaimer
This product cannot be used as a stand-alone product!
Therefore, it has to be integrated together with other products like power
supplies, mass storage devices (i.
e. hard disks), etc. to be functional.
To meet FCC and/or CE requirements every component as well as the
combination of all components has to be validated against all standards
required for the end product.
In order to meet FCC and/or CE requirements this product has to be
integrated into a proper housing, which provides appropriate shielding and
insulation.
It is on the customer’s sole responsibility to assure that this end-product meets
all required standards.
E.E.P.D. GmbH gives no warranty at all that their products will meet the FCC
and CE standards when used in combination with other third-party products
or when used in any other way than specified.
Limited Warranty
This product will be free from defects in workmanship and material under
normal and proper use for the period of time defined in our General Terms of
Business, effective the date of the original shipment from E.E.P.D. GmbH.
In the event of a warranty claim for defects, which appear within the warranty
period, customer shall deliver the product along with proof of purchase to the
original place of purchase, shipping prepaid. Repair, replacement or refund of
the purchase price of the defective product will be at the sole option of the
manufacturer. All transportation risks and costs in connection with warranty
service are the responsibility of the customer.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT LIMITATION, IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
TO ANY CUSTOMER, CONSUMER, END USER, PURCHASER, OR
OTHERWISE. IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR
LOSS OF PROFITS, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF ANY BREACH OF
CONTRACT OR WARRANTY, NEGLIGENCE, STRICT LIABILITY OR
OTHERWISE.
The remedies for defects in this product are limited to those set forth above.
If this limitation of remedies is held by any court to be void or unenforceable,
or if no warranty is made, manufacturers liability shall in no event exceed the
purchase price of the product giving rise to the claim, regardless of whether
such claim is brought in breach of contract or warranty, negligence, strict
liability or otherwise.
Reshipment
If you return the product to E.E.P.D. GmbH please remove all connections
and peripheral equipment.
Protect the unit through a suitable packaging, preferably use the original
packaging.
General Notes

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
4
10/2021 Revision 1.7
Packaging
The product is in a protective package to avoid damage during transport.
This protective package should be environmentally friendly recycled after use.
Disposal of Device
At the end of the lifetime please dispose and/or recycle the
components of the device accordingly.
Technical Support
For technical information about hardware and software please contact:
[e-mail]
General Notes

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
5
10/2021 Revision 1.7
Table of Contents
General Notes ...............................................................................................1
Used Symbols...............................................................................................6
1Product Description.................................................................7
Feature Overview.......................................................................7
Environmental Specification.......................................................9
2System Overview ...................................................................10
3Assembly ................................................................................11
4Feature Details........................................................................18
Mini-DP Connectors.................................................................19
Dual-USB 3.1 Gen2 Port..........................................................20
Gigabit Ethernet Dual-Port.......................................................20
Power Connector .....................................................................21
DDR4 RAM SODIMM Sockets.................................................22
Battery Connector ....................................................................23
Audio Connector ......................................................................24
M.2 Sockets..............................................................................25
Rear USB-C Port......................................................................26
Audio Jack................................................................................26
Jumpersetting for eDP Backlight – OEM/ODM only ................27
SATA Data Connector..............................................................28
SATA Power Connector...........................................................28
eDP Connector – OEM/ODM only ...........................................29
Power Button, Power and SATA LEDs ....................................30
Reset Connector ......................................................................30
Power Button Connector..........................................................31
FAN Connectors.......................................................................32
RS232/485 Connectors............................................................33
Feature Connector ...................................................................34
USB Internal Connector ...........................................................35
5BIOS.........................................................................................36
Entering Setup..........................................................................36
Main Menu................................................................................37
Advanced Menu .......................................................................40
Security Menu ..........................................................................70
Power Menu .............................................................................72
Boot Menu................................................................................74
AMD PBS Menu .......................................................................80
AMD CBS Menu.......................................................................84
Exit Menu................................................................................102
Revision History........................................................................................104
Index of Figures........................................................................................105
Index of Tables..........................................................................................107
Terminology ..............................................................................................108
Classified Index.........................................................................................109

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
6
10/2021 Revision 1.7
Used Symbols
The red danger sign warns you when a wrong or missing action
dramatically endangers your life or health. The used
components as well as the peripheral components could be
destroyed.
The orange warning sign warns you when a wrong or missing
action could seriously harm your health or destroy the used
components.
The yellow caution sign warns you when a wrong or missing
action could damage the component.
The yellow ESD sign draws your attention that static sensitive
parts of the component could be destroyed. Unpack shielded
components only with ESD protections like an ESD wrist strap.
The information sign gives you more information and advice for
optimal use of this product. For example, it helps you to
purchase necessary or optional accessories.
Symbols

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
7
10/2021 Revision 1.7
Product Description
In the first chapter you will get a glance of all the integrated features. For
further information and a brief description of all possible changes and
extensions please refer to the corresponding chapter.
Feature Overview
Power Supply
Designed for min. 10.8 V to max. 26.4 V (DC) single power supply, 10 A fused
EMI filtering
2-pin barrel connector for external DC Power and Ground
Processor Support
AMD V2000 processor series
V2516 / 6C / 12T / 2.1 GHz – 3.95 GHz / 10 – 25 W
V2718 / 8C / 16T / 1.7 GHz – 4.15 GHz / 10 – 25 W
Ethernet Controller
2 Intel® i225 2.5Gbit Ethernet PCI Express® controllers with IEEE1588.
RAM Support
Max. 32 GB dual channel DDR4 SODIMM, up to 3200 MT/s
Display
2 Mini-DP++ connectors, up to 4096 x 2160@ 60 Hz
Product
Description

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
8
10/2021 Revision 1.7
USB Support
7 USB ports from the SoC:
1 Dual-USB 3.1 Gen2 (10 Gb/s), Type A at the front side,
support for USB 2.0 and 3.1, max. 900 mA per port
1 Single-USB 3.1 Gen2 (10 Gb/s), Type C at the rear side,
support for USB 2.0 and 3.1, max. 1.5 A
1 USB 2.0 at the M.2 Key B Mini card socket
1 USB 2.0 at the M.2 Key E Mini card socket
2 internal USB connectors, support for USB 2.0
Storage Support
1 M.2 Mini card socket Key M, 22 mm x 42 mm (for SSD only),
SATA or PCIe-x4
2 standard SATA III (6Gb/s) upright connector + 2 SATA Power on Molex
connector
Expansion
2 M.2 Mini card sockets:
1 Key E, 22 mm x 30 mm, PCIe-x1 and USB2
1 Key B, 30/22 mm x 42 mm / onboard SIM card socket, PCIe-x1 and
USB2
Serial Ports
2 RS-232/485 (FDX|HDX Windows 10 only) port (8 wires) on internal Molex
connector
Audio
MIC IN, stereo HP OUT on 3.5 mm headphone Jack.
Stereo Line IN, stereo Line OUT on internal Molex connector.
OS Support
Microsoft® Windows® 11
Microsoft® Windows® 10
Microsoft® Windows® 10 IoT Enterprise
Linux Ubuntu 20.04 LTS
Extended Features
Onboard µ-Controller-IC for:
Input voltage level detection
Power-up sequencing and timing
System reset management
Temperature monitoring and FAN control
Watchdog
Power button input
Reset button input
Feature connector (GPIOs / Status LED)
Power LED onboard
Status LED onboard
RTC battery connector
Product
Description

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
9
10/2021 Revision 1.7
Environmental Specification
Max. Operating Temperature
0 °C to +60 °C ambient, when adequate heatsink/cooling is provided.
Other operating temperature ranges upon request.
Max. Storage Temperature
-40 °C to +85 °C
Max. rel. Humidity for all versions
95 % @ 40 °C non-condensing
Product
Description

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
10
10/2021 Revision 1.7
System Overview
This chapter describes the main hardware components of the NUCEX
board.
Fig. 1: System Overview
System Overview

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
11
10/2021 Revision 1.7
Assembly
The board must be mounted in a stable case. The mechanical mounting points
according to chapter 3.1 must be used.
The available sockets and connector for system build-up are specified in
chapter 4.
E.E.P.D. recommends M3 Torx screws with a screw locking coating and a
maximum tightening torque of 0.5 Nm.
Assembly

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
12
10/2021 Revision 1.7
Top View
Fig. 2: Top View
Bottom View
Fig. 3: Bottom View
Assembly

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
13
10/2021 Revision 1.7
Front View
Fig. 4: Front View
Fig. 5: Recommended cutouts front panel
Rear View
Fig. 6: Rear View
Fig. 7: Recommended cutouts rear panel
Assembly

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
14
10/2021 Revision 1.7
Side View
Fig. 8: Side View

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
15
10/2021 Revision 1.7
Mechanical Mounting
Fig. 9: Mechanical Mounting
Please use the 4 prepared mounting points (red outline) to
fasten the base board in order to prevent short circuits.
Use 15.24 mm (0.6 inches) distance bolts for a stable mounting
of the board.
Do not disassemble the cooling solution, this will void the
warranty.
The illustration shows an example of a variant with active
cooling.
Assembly

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
16
10/2021 Revision 1.7
Dimensions of the board
Fig. 10: Dimensions bottom side
Fig. 11: Dimensions top side
Assembly

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
17
10/2021 Revision 1.7
Fig. 12: Dimensions front side
Fig. 13: Dimensions side
Fig. 14: Dimensions threaded bolts
Assembly

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
18
10/2021 Revision 1.7
Feature Details
The following schedule contains all the necessary information to connect the
board to your peripheral equipment.
On the left side of the page, you will see the position on the board (red mark)
and on the right side a magnified image of the explained item.
The explanation provides general information, electrical specifications and a
pin assignment table.
All voltages are DC:
VCC 5 V +/-5%
P3V3
3.3 V +/-5%
P12V_DISPLAY
12 V +/-5%
Feature
Details

PROFIVE® NUCE_C 25 W
Hardware Reference Manual – P – Revision 1
E.E.P.D. GmbH | Gewerbering 3 | 85258 Weichs
Copyright ©2020|2021 E.E.P.D. GmbH.
All rights reserved.
19
10/2021 Revision 1.7
Mini-DP Connectors
Fig. 15: Mini-DP Connector Detail
Fig. 16: Mini-DP Connector Schematic
Important note:
There are two kinds of DisplayPort cables:
Cables for direct connection to a MiniDP monitor with Pin 20 on
both ends of the cable NOT connected.
Cables for use with dongles (e.
g. MiniDP to DP, MiniDP to
HDMI) with Pin 20 on both ends of the cable connected.
Possible effects if wrong cable is used:
System might not start up properly.
Dongle does not work properly (black display).
Feature
Details