Egholm City Ranger 2200 User manual

City Ranger 2200
DOZER BLADE
OperatOr’smanual

2
Dear Customer
Congratulations with your Egholm product.
The City Ranger 2200 is a Danish designed and manufactured product which oers a very exible
way of maintaining outdoor areas.
Optimal use of your City Ranger 2200 Dozer Blade
To ensure the optimal performance of your City Ranger 2200 Dozer Blade, please read this
operator’s manual carefully before starting to use the machine. Failure to do so can result in
personal injury and damage to the machine.
Safety:
The Dozer Blade is equipped with various devices to ensure optimal operational safety both for
the user and the surroundings. We therefore ask you to pay particular attention to Safety section
1.1. The machine must only be serviced by professionals.
The Dozer Blade is designed only for use by professionals. On delivery, the user will receive
thorough training to become a competent operator.
Do not lend the machine to anyone who has not been thoroughly trained and has not read this
manual carefully.
The operator's manual should be considered a permanent part of the machine and so must
remain with it if the machine is sold.
Warnings:
Some items in this operator's manual are marked with this warning symbol.
The warning indicates areas where extra care has to be taken to avoid personal
injury or damage to the machine and its accessories. The warning also shows
what you should pay special attention to.
Reservations:
As it is the Egholm policy to make continuous improvements, we reserve the right to alter the
specications and equipment at any time without notice. Nlsk-Egholm A/S accepts no liability
for errors or omissions in the operator's manual.
Contact us:
Do not hesitate to contact Egholm A/S should you have any questions regarding your new Egholm
product.
Best regards
Egholm A/S · Transportvej 27 · DK-7620 Lemvig
T. [phone] · F. [phone]
E-mail: [e-mail] · www.egholm.eu
Operator's Manual City Ranger 2200 Dozer Blade
Introduction
!

3
The Dozer Blade truly shows the strength and power of the
City Ranger 2200. The machine, with its four-wheel drive
and carefully designed weight distribution pushes snow
eortlessly away.
Hydraulically adjustable, the Dozer Blade pushes the snow
to whichever side you choose, and can be ingeniously
combined with the Salt and Sand Spreader to make icy
patches safe at the same time.
To protect both the surface and the machine, the Dozer
Blade is tted as standard with a safety tilt system and a
rubber scraping edge.
The rubber scraping edge is ideal for use with melting
snow and also scrapes the surface thoroughly without
damaging it.
Useful tips
Adjust the skids according to surface conditions.
In case of many raised edges, set the skids high so they do
not cut into the edges.
Use the Dozer Blade for big drifts. The Dozer Blade
removes most of the snow. The Snow Sweeper nishes o
the job.
Ensure the snap couplings are clean before tting, as this
protects the hydraulic system.
Daily cleaning and maintenance will extend the lifetime of
both the machine and the attachment.
Operator's Manual City Ranger 2200 Dozer Blade
Contents
General information..............................................................................4
1.1 Safety ....................................................................................4
1.2 EC Declaration of Conformity for Machinery ....................................................5
1.3 Technical data .............................................................................6
2.1 Assembly / Disassembly .....................................................................7
Operator's manual...............................................................................7
2.2 Important before start-up ...................................................................8
2.3 Start-up...................................................................................8
2.4 Adjustment................................................................................9
Service and maintenance ........................................................................10
3.1 Cleaning .................................................................................10
3.2 Maintenance .............................................................................10
Conditions .....................................................................................12
4.1 Warranty.................................................................................12
4.2 Complaint................................................................................13
4.3 Disposal..................................................................................13
Spare parts ....................................................................................14
5.1 Spare parts - City Ranger 2200 Dozer Blade....................................................14

1
2
3
4
1.1 Safety
Make sure no one is standing close to
the machine while it is in use.
Make sure that no one is near the machine
while it is in use as there is a danger of
crushing.
Attention:
As it is articulated, the rear end of the
machine swings out when turning.
Make sure that no one is standing near the
machine while it is in use. (Picture 1)
The Dozer Blade swings to the side when the
joystick is moved left or right. Make sure that
no one is standing near the machine while it
is in use. (Picture 2)
Avoid crushing ngers:
Keep your hands and ngers away from
areas where there is a danger of crushing.
Avoid roll-overs:
Do not drive the machine in a place where it
can slide, tip or roll. Do not drive on slopes
with an incline of more than 10°. (Picture 3)
General information
!
!
!
!
!
Do not drive on slopes with an incline of more than 10°
Operator's Manual City Ranger 2200 Dozer Blade
Prevent people from standing in the working area.
Joystick

5
General information
Operator's Manual City Ranger 2200 Dozer Blade
1.2 EC Declaration of Conformity for Machinery
Manufacturer: Egholm A/S
Address: Transportvej 27 · DK-7620 Lemvig
Telephone: [phone]
herby declares that
Machine: Dozer Blade
Type: 22DZ13
· has been manufactured in conformity with the provisions of the Machinery,
Directive 2006/42/EU
Place: Lemvig
Date:
Signature:
Knud Olsen, Senior Engineer

6
1.3 Technical data
Dimensions:
Length (L):
Width (W):
Height with cab (H):
Assembled
2,850 mm
1,300 mm
1,960 mm
Storage dimensions:
500 mm
1,300 mm
545 mm
Technical data:
Type description:
Weight of Dozer Blade:
Clearing width:
Ground clearance below scraping edge, lifted:
Ground clearance below skids, lifted:
Adjuster discs per skid:
22DZ13
66 kg
1,300 mm
420 mm
370 mm
8
Attention:
Specications may be changed without prior notice
General information
Operator's Manual City Ranger 2200 Dozer Blade

7
1
2
3
2.1 Assembly / Disassembly
1. The locking handle on the A-frame of the basic machine
must be in the unlocked position. (Picture 1)
2. Drive the basic machine right up to the A-frame of the
Dozer Blade, so the A-frames t into each other. (Picture 2)
3. Raise the A-frame by pulling the joystick back until the
Dozer Blade is suspended and free of the ground.
4. Stop the machine.
5. Lock the Dozer Blade in place with the locking handle
on the A-frame. (Picture 3) The locking handle can only be
engaged when the machine has been stopped.
Disassembly:
Follow the procedure for tting in reverse order.
Locking handle
Attaching
Locking
Operator's Manual City Ranger 2200 Dozer Blade
U
n
l
o
c
k
e
d
Operator's manual

1
2
3
4
8
2.2 Important before start-up
During transport:
Lock the Dozer Blade in the raised position using the
transport lock. This prevents the equipment from lowering
during transport.
How to use the transport lock:
Move the handle into the uppermost position. Lift the A-
frame by moving the joystick up. As the A-frame lifts the
transport lock is automatically activated. (Picture 1)
How to use the transport lock:
Unhitch the handle and lift the A-frame to uppermost position.
The equipment can now be lowered again. (Picture 2)
2.3 Start-up
1. Start the machine.
2. Lower the Dozer Blade by moving the joystick down.
(Picture 3)
3. Activate the weight distribution with the red button on
the joystick. (Picture 4) The Dozer Blade will now adjust
to ground conditions. To adjust the weight distribution
read the operator's manual for the basic City Ranger 2200
machine.
4. Turn the Dozer Blade by moving the joystick to the
left or to the right. The Dozer Blade swings in the same
direction as the joystick.
Attention!
Make sure no one is standing close to the
machine while it is in use.
N.B!
When turning, the rear of the machine
swings out, so there is a risk of crushing
or collision.
Operator's manual
Transport lock in locked position
Transport lock
Joystick
Locked
Weight distribution
Operator's Manual City Ranger 2200 Dozer Blade
Unlocked
ON/OFF
!
!

1
2
3
9
Transport lock
Locked
Warning!
Collision with solid obstacles – such as
kerbstones – may damage the dozer
blade. This damage may cause bolts to
snap or parts of the dozer blade to bend.
Damage of this type is not covered by the
warranty.
2.4 Adjustment
Adjust the skids according to surface conditions.
If there are a lot of raised edges set the skids high so they
do not cut into the edges.
The scraping height is adjusted by changing the number of
adjuster discs between the skid and the scraper guard.
Adjusting the scraping height:
1. Raise the Dozer Blade by pulling the joystick up.
(Picture 1)
2. Lock the Dozer Blade in the raised position with the
transport lock. (Picture 2)
3. Stop the machine.
4. Remove the locking ring on the skid, take o the skid
and place the required number of adjusting discs between
the skid and the scraper guard (the same number on both
skids). (Picture 3)
5. Fit the skid and put the remaining adjuster discs on the
skid above the scraper guard.
6. Put the locking ring back on the skid.
Adjuster discs Remaining adjuster discs
Operator's manual
Operator's Manual City Ranger 2200 Dozer Blade
The Dozer Blade is raised using the joystick
!

2
1
3
10
2
Location of lubrication nipples
3.1 Cleaning
Daily cleaning and maintenance will extend the lifetime of
both the machine and the attachment.
After use clean the Dozer Blade with clean water.
Avoid high pressure cleaning of the snap couplings.
Open the ap over the snap couplings. Use pressurised air
to clean around the snap couplings. The couplings can be
dried with a cloth. (Picture 1) It is important the couplings
are intact before the attachment is taken o.
3.2 Maintenance
Lubricating the bearings:
The bearings in the pivot joint of the Dozer Blade should
be greased regularly with good quality grease.
1. Stop the machine.
2. Clean the lubricating nipples and lubricate the bearings
until the grease starts to come out of the bearing. (Picture 2)
Replacing the scraping edge:
The scraper at most can be worn down to the scraper
guard.
1. Lift the Dozer Blade to the uppermost position and lock
with the transport lock. (See 2.2)
2. Stop the machine.
3. Remove the nuts and bolts holding the scraper edge and
remove the scraper edge. (Picture 3)
4. Fit the new scraper edge by reversing the procedure.
New scraper edges and skids can be ordered from an
authorised Egholm distributor.
Snap couplings
Nuts holding the scraper edge
Operator's Manual City Ranger 2200 Dozer Blade
Service and maintenance

11
Storage outside the season:
When the Dozer Blade is to be stored outside the season, it
is recommended to remove any loose paint and to repaint
any damaged areas.
It is recommended the equipment is greased / sprayed
with protective lubricant.
Service and maintenance
Operator's Manual City Ranger 2200 Dozer Blade

12
4.1 Warranty
The warranty period for the materials and manufacture of this Dozer Blade is 12 months from the
date of purchase. In case of errors or defects on the machine within the warranty period, Egholm
A/S will carry out the necessary repairs at no charge to the customer, including materials and
working hours, in accordance with the terms and conditions listed below.
The scope of warranty:
1. The Egholm warranty is only valid on presentation of the original receipt supplied with model
description, serial number and date of purchase.
2. Regular checks, adjustments, services and technical alterations are not covered by the warranty.
3. All inquiries concerning the warranty are to be addressed to the place where the machine was
purchased.
4. This warranty does not cover faults and defects which cannot be traced back to defects in
material or production errors.
5. This warranty is valid for persons who have legally acquired the machine within the warranty
period.
6. In the event of failure to perform and substantiate service in accordance with the applicable
instructions, Egholm reserves the right to reject any claim made within the warranty period.
7. Egholm A/S reserves the right to make improvements and design-related alterations to the
machine without being obliged to modify previously delivered models in relation hereto.
The warranty does not cover:
· Wear and tear, accidents, damage to the equipment caused by operating errors, changes to the
construction of the machine or use of non-Egholm spare parts or implements.
· Machines with illegible serial numbers.
· Damage cause by force majeure such as lightning, ood, re, war, civil disturbance etc., or other
causes over which Egholm A/S has no control.
Operator's Manual City Ranger 2200 Dozer Blade
Conditions

13
4.2 Complaint
All inquiries regarding the machine should be made at the distributor from whom the machine
was purchased. This applies to inquires concerning normal use, service, maintenance and spare
parts as well as any complaints.
We wish you many years of safe and satised use of your machine.
Best regards
Egholm A/S
4.3 Disposal
When — in many years from now — your Dozer Blade has reached the end of its working life
it should be disposed of in a responsible manner and in compliance with the relevant disposal
regulations.
1. Used hydraulic oil is to be disposed of at an approved waste disposal facility or site.
2. Remove all plastic and rubber parts and dispose of.
3. After the parts mentioned have been removed, the machine is ready to be handed over to an
approved scrap merchant.
Operator's Manual City Ranger 2200 Dozer Blade
Conditions

14 Operator's Manual City Ranger 2200 Dozer Blade
Spare parts
02200060 Spring
5.1 Spare parts - City Ranger 2200 Dozer Blade
09724490 Rubber scraping edge
61200898 Skids
90501921 Break joint
01702020 Removable bearing/Break joint

15
Operator's Manual City Ranger 2200 Dozer Blade
Notes

Egholm A/S
Transportvej 27
DK-7620 Lemvig
T. [phone]
F. [phone]
www.egholm.eu
[e-mail]
70101281-01 EN