Eiki EBS10 User manual

Stereo Sound, Double Fun
Pair up to two speaker for a more stereo surround sound
to bring your party to life.
All-Day Playtime
Keep your favorite playlist going on with up to 14 hours /
500 songs on a single charge.
*On a 50% volume level.
Disconnect Bluetooth
Method 1: Press and hold M Key (Switch Mode)
Method 2: lPress and hold "BT" button above the remote
control.
The first time connection, change to Bluetooth mode press
M key (Switch Mode) button. Turn on Bluetooth mode
on mobile device, search for "EBS10" and pairing. There
will be a prompt sound after pairing is successful.
③Play/Pause:Press to play or pause.
Press and hold for connecting or
disconnecting the slave unit
EBS10
User Guide
Brilliant of Sound Clarity
Buttons and operational instructions
Front
Buttons and ports
①Switch Mode:Switching between Bluetooth, FM Radio,
Flash Drive and AUX Input mode
⑧Type C Port:5V 2A Charging Port
⑨USB Port:Support MP3,WMA and other mainstream
audio formats
Connect the Bluetooth
Connect 2 units at the same time
Press and hold on play/pause button for about 3 seconds
Complete the same step settings; If you need to
disconnect the synchronization, you can press and hold
on Play/Pause button about 3 seconds.
Tips: It is recommended to put the two speakers nearer
before synchronization for a smoother operation.
Remote button instructions
Please insert 2 x AA battery on the remote before using.
This is an infrared remote control, the coverage will be in front of
speaker and up to 45 degree ratio sensitive (left & right)
Speaker Remote Area Remote Controller
Indicator Light
On/Off
Vol Up
Previous
Sequential Loop
Single Loop
Play/Pause
Bluetooth Mode
Radio Mode
Next
Vol Down
USB Mode
Aux Input
Mute
Product Specifications
Product packaging list
Warranty Card
Product model
Purchase from
Purchase date
Buyer Detail
Name:
Address:
Phone:
Maintenance Record
Description
Tips:Please keep this card for warranty purposes
Processing
Sign:
* Please read instructions before using
Product Description
⑦Light:Indicator Light
⑥AUX Port:AUX Audio Input
Press and hold to connect or
disconnect current speaker
An Ultra-Portable / Wall-Mount Speaker with the
Latest Design
Equipped with the latest technology including Bluetooth
5.1 & USB-C, T2 Plus is engineered to deliver deep
bass and punchy sound in a compact size.
Deep Bass, Powerful Audio
20W of deep bass and punchy sound delivered from 2
full-range speaker drivers and a passive radiator.
⑤Switch Device:On/Off Button
④Next Song/Vol Up:Press for Next Song, press and
hold for Volume Up
②Previous Song/Vol Down:Press for Previous Song,
Hold and press Volume Down
FM Selection Mode
Long press Play/Pause button up to 3 seconds. Speaker
will auto search for FM channel. Once done, press on
Next or Previous bottom for FM channel selection.
Specification:-
Power Out: 2x10W=20W
Speaker Size: Φ66mmX2 +modals 42mmX78mmX2
Speaker Material: Neodymium Magnet
Frequency Range: 60-20kHz
SNR: ≥86dB
Distortion Factor: ≤1%
Receive Distance: More Than 10m
Bluetooth Version: 5.1
Charging: USB Type-C 5V/2A
Input: AUX (3.5mm) Input, USB Input & FM Radio
USB Support Format: WAV, MP3, WMA, APE, FLAC
Built-in Lithium Battery: 5000mah
Charging Time: ≤4 hours
Working Time : Min 14hours
Product Size: 198x198x45mm
Product Weight: 590g
Color of Speaker: White
Package Come With:2m USB Charging Cable and
Remote Control
1.Main Product
2.User Guide
3.Wall accessories(including screws)
4.Charging cable
5. Remote controller

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.