Eizo LMM0802 User manual

1
Large Monitor Manager Setup
LMM0802 & LMM56800

2
Quick Start Guide
LMM system - Configurations
▪LMM0802 Set up and configuration
▪Configuration
▪General Setup
▪Connection example
▪Configuring the input signals
▪Creating Layouts
▪Network Settings
▪System control (user interface)

3
Configuration
▪For Configuration, following two methods are available:
1. Web Browser via a network
▪Equipment required:
▪Monitor (mandatory)
▪LMM0802 (mandatory)
▪Standard PC with a web browser installed
▪Monitor with minimum 1280 x 1024 screen resolution
▪Network switch if more than one device is connected to the LMM (optional)
2. Standalone LMM via keyboard and mouse
▪Equipment required:
▪Monitor (mandatory)
▪LMM0802 (mandatory)
▪USB Keyboard and Mouse (mandatory)

4
General Setup –Web Browser
LMM0802 LS580W, LX550W
PC for configuration
Video Connecion
Ethernet LAN Connection
IP address:
169.254.213.144
IP address:
169.254.213.125
Web browser:
169.254.213.144/config

5
General Setup –2
Source 1
Source 2
Source 3
Source n
User Interface
e.g: CID1000P
LMM56800 LS580W
PC for configuration
Video Connection
Ethernet LAN Connection
1G-b: LMM system - Configurations

6
Connection Example1
LS580W
LMM
IP address:
169.254.213.44
Ethernet (cross)
IP address:
169.254.213.1
External interface: PC or laptop
Ethernet (cross)
for maintenance
CID1000P
IP address:
169.254.213.11
1G-b: LMM system - Configurations

7
Connection Example2
1G-b: LMM system - Configurations

8
Computer IP Settings

9
Web Browser Control of LMM
▪Entering the configuration menu
▪Enter the IPAddress of the LMM in the address bar of a web browser
Note
Recommended browsers (IE can cause unusual difficult to understand problems), instead use:
Chrome
or
Mozilla Firefox Version 10 or higher

10
Error when using IE

11
General Setup –Standalone
1. Connect a keyboard and mouse to connection panels X1 ... X6.
2. Confirm you have blue mouse cursor on monitor(s) connected to the LMM output.

12
Log on as "Administrator"
1. Open Base settings“ sidebar.
2. Click “ “
3. Select “Service”
4. Input “super” as Admin password.
Base Settings menu activated.

13
User Interface Overview



①Sidebar "Base settings“
②Sidebar "Input configuration”
Log in
Basic Operation for sidebar
1. Sidebar pops up when mouse cursor approach to each sides.
2. Click “pin” icon to keep the sidebar opened.
③Sidebar "Layout"
④Sidebar "Instances"

14
Configuring the input signal
1. Connect the video signals from the sources to the LMM
2. Open the "Input configuration” Sidebar of the LMM.
3. Confirm if the port shows green sign.
Signal info can be checked by moving cursor over the port.
Channel is not active
Channel is active, but the signal information can not be read.
Channel is active and the signal from the source is recognized
Symbol legend:

15
Configuring the digital input signal
4. Double-click left on the port where input signal is connected. Video
configuration window appears on the center of the screen.
5. Define EDID (Resolution) of this input port
by selecting from the pull-down menu.
6. Click OK to close the Video configuration window.
Image Preview here

16
Creating instances
Understanding the concept of “instance” on LMM0802.
✓Defined presentation of a video signal of a video source within a window of a layout. For each video
input of the LMM0802, multiple instances can be displayed with different presentations, e.g. 1:1, with a
border, or as a cropping area.
✓One instance has already been created by default for each video input.
✓Each instance can be assigned to one or more windows and layouts.
Instance 1
1:1 Full Screen Instance 2
Cropped Instance 3
Cropped w/border/title
Original Image source
3D

17
Creating instance
Name of the
source signal
Check these boxes to
show the signal name
on the screen and to
display a border around
the signal window.
Select the color for the
border.
Select the thickness of
the border.
Select the font color for the
name.
Select the background color
of the title.
1H-b: LMM system - Configurations
Check this to make advanced
settings like zooming or
cropping.
Create/delete miniature
thumbnail for each instance.
Activate this option when
displaying vital functions or
ECG images in a layout smaller
than 1:1.
Activate KVM function,
see the slide
(KVM settings).

18
Creating layouts
New Layout
1. Open “Sidebar layout”, click “ “ to create new layout.
2. Specify the name of the new layout
3. One single window will be open as a new layout.
4. Tool icons will be shown on the top right. (see next page for details)

19
Creating layouts
Delete Split Expand
Blank

20
Creating layouts
1:1
Fix
Banner position
If Original signal resolution
Is 1920 x 1200…
Expand the region to
1920 x 1200.
Fixed
Go to Instance config.
Change the window
size by moving green
makers.
Makers