Eizo CuratOR EX3140 User manual

Important
Please read this “Installation Manual”, and “Instructions for Use”
(separate volume) carefully to familiarize yourself with safe and
effective usage.
Refer to the “Instructions for Use” for information on the installation /
connection of the monitor.
Color LCD Monitor
Installation Manual

2
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.

3
CONTENTS
CONTENTS
CONTENTS............................................................. 3
Chapter 1 Basic Adjustment / Setting.............. 4
1-1. Loading the Monitor Settings...................... 4
1-2. Switching Input Signals ............................... 5
1-3. Using Function Buttons ............................... 5
Chapter 2 Advanced Adjustment / Setting ...... 6
2-1. Operation via the Main Menu....................... 6
2-2. Individual Functions of Main Menu............. 7
●Video Cong.................................................... 7
●System Cong................................................. 8
●Window Cong...............................................10
●PRESET.........................................................11
●Control............................................................11
Chapter 3 Troubleshooting.............................. 13
3-1. No Picture Displayed ...................................13
3-2. Imaging Problems........................................14
3-3. Other Problems............................................14
Chapter 4 Reference ........................................ 15
4-1. Main Default Settings ..................................15
4-2. PinSpecications........................................16
Appendix.............................................................. 17
LIMITED WARRANTY..............................................17
Trademark ................................................................18
License .....................................................................18
Recycling Information ............................................19

4Chapter 1 Basic Adjustment / Setting
Chapter 1 Basic Adjustment / Setting
This chapter describes the basic functions that can be adjusted and set by pressing the buttons on the front
of the monitor.
1-1. Loading the Monitor Settings
It is possible to switch to PRESET, FACTORY, or the USER settings that have been set in advance.
PRESET Basic settings are made in advance at the factory. The settings of PRESET cannot be
changed.
FACTORY Returns to settings when shipped from the factory.
USER Various settings including menus can be made for personal use. For details, see “PRESET”
(page 11).
1. Press (PRESET).
The preset menu is displayed.
2.
Press to select the PRESET number, FACTORY, or USER number to
load, and then press (ENTER).
The pre-made settings are loaded and the settings are changed. The selectable settings are as
follows.
• PRESET1 to PRESET5
• FACTORY
• USER1 to USER10
Note
• The “PRESET” menu will disappear after ve seconds have elapsed if no operation is performed.
• is displayed for the USER number that has already been registered.
• When selecting a USER number that has not yet been registered, “No Data” is displayed.
• For information about the main default settings, see “4-1. Main Default Settings” (page 15).

5
Chapter 1 Basic Adjustment / Setting
1-2. Switching Input Signals
Select the signal input to the monitor and display it on the screen.
1. Press (INPUT).
The “Input Select” menu appears.
2.
Press to select an input signal.
This switches to the selected input signal.
3.
Press (INPUT).
The menu screen exits.
Note
• When selecting SDI, SDI 1 to SDI 4 can be selected using the buttons.
• If you press (INPUT) while the “Input Select” menu is displayed in dual screen mode, the “Input Select” menu
of the subscreen is displayed.
• The Input Select menu will display for 7 seconds without input before it disappears.
1-3. Using Function Buttons
Execute the functions assigned to the function buttons (F1 ( ), F2 ( ), F3 ( ), F4 ( ) and F5
( )). For information on how to set a function to each button, see “Function” (page 8) .
1. Press F1 ( ), F2 ( ), F3 ( ), F4 ( ) or F5 ( ).
When the function menu is displayed, the function associated with the button that is pressed will run.
Note
• In dual screen mode, press (INPUT) to select a screen for performing the target function.
• When the function button for a function that cannot be run is pressed, the message “Invalid Function” will appear.
• When the function button that has not yet been dened is pressed, the message “Undened” will appear.

6Chapter 2 Advanced Adjustment / Setting
Chapter 2 Advanced Adjustment / Setting
This chapter describes advanced monitor adjustment and setting procedures using the main menu.
2-1. Operation via the Main Menu
1. Menu display
1. Press (MENU).
The main menu is displayed.
2. Press to select the desired item, and then press .
2.
Adjusting / setting
1. Press to select the desired item.
2. Press to set.
If “Next Menu” is displayed for items, press , and a next menu is displayed.
3.
Exiting
1. If you repeatedly press (MENU), the menu screen exits.

7
Chapter 2 Advanced Adjustment / Setting
2-2. Individual Functions of Main Menu
●VideoCong
Adjustments / settings for image display.
Function Setting
range Description
Color 0 to 100 Adjusts color depth of the image.
Tint 0 to 100 Adjusts skin tones.
Brightness 0 to 100 Adjusts image darkness (black).
Picture 0 to 100 Adjusts image intensity.
S.R.S.C 0 to 20 This adjusts picture crispness.
Gamma 1.8 to 2.6
DICOM
HLG
PQ
Adjusts brightness.
Backlight 0 to 100 Adjusts brightness of backlight. In case of multiple windows,
select the main screen. The setting cannot be changed
when a screen other than the main screen is selected.
Color Temp 6500 K
9300 K
Off
Switches tone of the image.
R Gain 0 to 100 Adjusts the brightness of red in bright portions.
G Gain 0 to 100 Adjusts the brightness of green in bright portions.
B Gain 0 to 100 Adjusts the brightness of blue in bright portions.
R Bias 0 to 100 Adjusts the brightness of red in dark portions.
G Bias 0 to 100 Adjusts the brightness of green in dark portions.
B Bias 0 to 100 Adjusts the brightness of blue in dark portions.
Color Gamut sRGB
Native
BT2020
Sets the Color Gamut.
Input Color Format RGB
YUV422
YUV444
When there is a DisplayPort input, this sets the color format.
Input Range 0 to 255
16 to 235
16 to 255
Changes the dynamic range depending on the input signal.
• “0 to 255”
Use this setting when connecting PC format source.
• “16 to 235”
Set when connected to a video format device or PC
format device.
• “16 to 255”
Set when connected to a video format device or PC
format device.
Noise Reduction Off
Light
Middle
Heavy
Select Noise Reduction level for picture.

8Chapter 2 Advanced Adjustment / Setting
●SystemCong
Settings for devices.
Function Setting range Description
SDI 4K Auto
SQUARE
INTERLEAVE
Sets the signal format.
• “Auto”
SQUARE or INTERLEAVE are automatically detected.
• “SQUARE”
Treats as Square Division (SQD) signal.
• “INTERLEAVE”
Treats as Two-Sample Interleave Division (2SI) signal.
Function F1
F2
F3
F4
F5
POP
Display Direction
Scan Size
Gamma Select
Color Gamut
Noise Reduction
Zoom
Undef
Sets functions assigned to function buttons.
• “POP”
Switches the screen display between the dual screen (P
out P: a screen is split vertically) and the single screen.
• “Display Direction”
Rotates / ips the screen.
• “Scan Size”
Switches the setting values of “Window Cong” - “Scan
Size” in sequence.
• “Gamma Select”
Switches the setting values of “Video Cong” - “Gamma”
in sequence.
• “Color Gamut”
Changes the color gamut.
• “Noise Reduction”
Changes between the values “Video Cong” and “Noise
Reduction”.
• “Zoom”
Expands the current view on the display.
• “Undef”
No function assigned.
Status Display Continue
3Sec
Off
Sets whether information about the current input signal and
terminal name is displayed.
Information about the resolution at the PC signal input is
also displayed.
Power On Setup Last
PRESET1 to
PRESET5
FACTORY
USER1 to USER10
Settings for switching on can be set in advance.
• “Last”
Starts with last saved state.
• “PRESET1 to PRESET5”
State saved in PRESET is called. Five types of
PRESET are stored in advance in the monitor as xed
data.
• “FACTORY”
Returns to factory settings.
• “USER1 to USER10”
State saved in USER is called. It is possible to store 10
types of data in USER.

9
Chapter 2 Advanced Adjustment / Setting
Function Setting range Description
Power Save Mode On
Off
Sets whether function that the backlight turns off due to no
video signal after 30 sec is valid.
Language English
Deutsch
Français
日本語
Italiano
Español
Svenska
簡体中文
繁體中文
Sets the language to be used for display in settings and all
menus.
Logo Display On
Off
The logo display on power-on can be set to On or Off.

10 Chapter 2 Advanced Adjustment / Setting
●WindowCong
Settings for screen display.
Function Setting range Description
Multi Window Off
2POP
Sets dual screen display.
• “Off ”
Sets single screen display mode
• “2POP ”
Displays split window (P out P).
Display Direction Normal
180°
Mirror
Sets the rotation angle or horizontally ips the main screen and
subscreen.
Note
• When “180°” is selected , it will be displayed on the screen.
• When “Mirror” is selected , it will be displayed on the screen.
Scan Size (When Multi
Window mode is
set to “Off”)
Normal
Through
Sets zoom in and out ratios when displaying input video on the
monitor.
• “Normal”
When using the single screen, enlarges or reduces so that the
vertical resolution is 2160 dots. Dark bands form left and right
when the aspect ratio is other than 16:9.
• “Through”
Dot-by-dot display.
• “H Fit”
The input signal will ll the POP horizontally.
• “V Fit”
Displays the input signal matching the vertical display frame of
the POP.
(When Multi
Window mode is
set to “2POP”)
H Fit
V Fit
Zoom 1.5
2.0
Setting for the zoom percentage when an image is zoomed.
• “1.5”
Expand by 1.5.
• “2.0”
Expand by 2.0.