Eizo DURAVISION FDX1501 User guide

中文
English Deutsch Français
Setup Manual
Important: PleasereadthisSetupManualandtheUser’sManualstored(ontheCD-
ROM)carefullytofamiliarizeyourselfwithsafeandeffectiveusage.Please
retainthismanualforfuturereference.
Installationshandbuch
Wichtig: LesenSiediesesHandbuchzurEinrichtungunddasBenutzerhandbuch
(aufderCD-ROM)aufmerksamdurch,umsichmitdersicherenund
efzientenBedienungvertrautzumachen.BewahrenSiediesesHandbuch
zumspäterenNachschlagenauf.
Manuel d’installation
Important : VeuillezlireattentivementceManueld’installationetleManueld’utilisation
(inclussurleCD-ROM)andevousfamiliariseravecceproduitetde
l’utiliserefcacementetentoutesécurité.Veuillezconservercemanuel
pourréférenceultérieure.
设定手册
重要事项： 请仔细阅读本设定手册和用户手册（储存在光盘上），以便掌握如何安全、
有效地使用本产品。请保留本手册，以备日后参考。

1
English
SAFETY SYMBOLS
This manual and this product use the safety symbols below. They denote critical information. Please read them
carefully.
WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life
threatening.
CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or
property or product damage.
Indicates an attention to be required. For example, the symbol illustrates the hazard type
such as “the risk of electric shock”.
Indicates a prohibited action. For example, the symbol illustrates a particular prohibited
action such as “Do not disassemble”.
Indicates a mandatory action that must be followed. For example, the symbol illustrates
the notication of general prohibition such as “Grounding the unit”.
Compatible Resolutions
The monitor supports the following resolutions.
Analog Input (D-Sub)
Resolution Applicable Signals Vertical Scan
Frequency Dot Clock
640×400 NECPC-9801,PC-9821AP2 upto70Hz
80MHz
(Max.)
640×480 VGA,VESA upto75Hz
720×400 VGATEXT 70Hz
800×600 VESA upto75Hz
1024×768*VESA upto75Hz
Digital Input (DVI-D)
Resolution Applicable Signals Vertical Scan
Frequency Dot Clock
640×480 VGA 60Hz
65MHz
(Max.)
720×400 VGATEXT 70Hz
800×600 VESA 60Hz
1024×768*VESA 60Hz
A graphics board in conformance with VESA standard is required.
* Recommended resolution
About Setup Manual and User’s Manual
Setup Manual
(this manual)
Describes basic information ranging from connection of the
monitor to a PC to using the monitor.
User’s Manual of
this monitor*Describes the application information of the monitor such as
screen adjustments, settings, and specications.
User’s Manual of
Touch Panel Driver*Describes the installation and use of the touch panel driver.
* PDF le on the CD-ROM (Installation of Adobe Reader is required.)
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been
made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are
subject to change without notice.

2
PRECAUTIONS
IMPORTANT
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements
on the monitor.
Location of the Caution Statements
Example: FDX1501T
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes strange
noises, disconnect all power connections immediately and contact your dealer for advice.
Attempting to use a malfunctioning unit may result in re, electric shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in re, electric shock, or burn.
Refer all servicing to qualied service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in re, electric
shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet
may result in re, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet,
unplug the unit immediately. Have the unit checked by a qualied service engineer before using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls,
disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit.
Using a damaged unit may result in re or electric shock.
Use the unit in an appropriate location.
Not doing so may result in re, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be affected
by strong vibration or shock.
• Do not place in a dusty or humid environment.
• Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.).
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidier
• Do not place in a location where the product is subject to direct sunlight.
• Do not place in an inammable gas environment.

3
English
WARNING
To avoid danger of suffocation, keep the plastic packing bags away from babies and
children.
Make sure the power cord meets the following requirements.
This product does not include a power cord. Please provide separately a power cord which meets the
requirements. (For more information, please contact your dealer.)
• The power cord is compatible with the standards of the country and region in which this product is to be
used.
• The power cord has a rated value of at least 7A.
Power supply: 100-240Vac 50/60Hz
To disconnect the power cord, grasp the plug rmly and pull.
Tugging on the cord may damage and result in re or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in re or electric shock.
Use the correct voltage.
• The unit is designed for use with a specic voltage only. Connection to another voltage than specied
in this User’s Manual may cause re, electric shock, or equipment damage.
• Do not overload your power circuit, as this may result in re or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in re or electric
shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm stand and
install the unit securely.
Not doing so may cause the unit to become unattached, which may result in injury or equipment damage.
When the unit is dropped, please ask your dealer for advice. Do not continue using a damaged unit. Using
a damaged unit may result in re or electric shock. When reattaching the tilt stand, please use the same
screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part
of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical
symptoms result, please consult your doctor.

4
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is
dangerous. It may result in injury.
When carrying the unit, grasp and hold it rmly by the bottom as shown
in the illustration on the right.
Dropping the unit may result in injury or equipment damage.
Do not install the unit in a closed space.
If the inerior becomes hot, it may result in re, electric shock or damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in re.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the power cord
from the wall socket after turning off the power for safety and power conservation.

5
English
Package Contents
Checkthatallthefollowingitemsareincludedinthepackagingbox.Ifanyitemsaremissingordamaged,contact
yourlocaldealer.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Analogsignalcable:MD-C87
• Stereominijackcable
• USBcable:MD-C93(forFDX1501Tonly)
• EIZOLCDUtilityDisk(CD-ROM)
• SetupManual(thismanual)
• “ForUsersofTouchPanelLCDMonitor”
(forFDX1501Tonly)
• Clamper2pcs.
• ScrewsforxingtheclamperM4×14:2pcs.
(Prepareascrewdriver.)
Attention
• This product does not include a power cord. Please provide separately a power cord which meets the usage requirements.
For more information, please contact your dealer.
Controls and Functions
16
9 10 11 12 1314
15
71 2 3 4 5 6 8 9
Example:FDX1501T
Adjustmentmenu
(ScreenManager*)
• FDX1501
• FDX1501T
Attachingtheclamper
1. Auto EcoView sensor Detectsambientbrightness.AutoEcoViewfunction.
2. button Displaysthesettingmenuofthepowersavingfunction(AutoEcoViewandEcoView
Index).
3. button Displaysthevolumeadjustmentmenu.(Press or toadjustvolume.)
4. button Switchesinputsignalsfordisplay.
5. button DisplaystheAdjustmentmenu,determinesanitemonthemenuscreen,andsaves
valuesadjusted.
6. button • Choosesandincreases/decreasesadjustmentsettingsforadvancedadjustment
usingtheAdjustmentmenu.
• Displaysthebrightnessadjustmentmenu.(Press or toadjustbrightness.)
7. button Turnsthepoweronoroff.
8. Power indicator Indicatesthemonitor’soperationstatus.
Blue:OperatingOrange:PowersavingmodeOFF:Mainpower/Poweroff
9. Speaker Outputsaudiosource.
10. Main power switch Turnsthemainpoweronoroff.
11. Power connector Connectsthepowercord.
12. Input signal connector Left:DVI-Dconnector/Right:D-Submini15-pinconnector
13. USB port (UP)
(for FDX1501T only)
ConnectsaUSBcablewhenthisproductisusedasatouchpanelmonitor.
14. Stereo mini jack Connectsthestereominijackcable.
15. Stand Usedtoadjusttheangleofthemonitorscreen.
16. Screw holes for
securing the clamper
(2)
Attachtheclampertopreventthecablefromfallingoff.
Fitthecableintheclamperandtitwiththesetscrew(M4×14),asshowninthe
diagramabove.
*ScreenManagerisanEIZO’snicknameoftheAdjustmentmenu.ForhowtouseScreenManager,refertotheMonitor
User’sManual(ontheCD-ROM).

6
Connecting Cables
Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, be sure to change the PC settings for resolution and vertical scan
frequency to those that are available for this monitor. Refer to the compatible resolution table (page 1) before connecting
the PC.
Note
• When connecting multiple PCs to this product, refer to the Monitor User’s Manual (on the CD-ROM).
1. Connect the signal cables to the input signal connectors and PC.
Check the shape of the connectors, and connect the cables.
After connecting the signal cable, tighten the screws of the connectors to secure the coupling.
DVI
D-SUB
AUDIO OUTPUT
DVI
D-SUB
Digitalconnection
(DVI)
Analogconnection
(D-Sub)
SignalcableMD-C87
(supplied)
SignalcableFD-C39
(Option)
Stereominijackcable(supplied)
or
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
Adjusting the Screen Angle
Hold left and right edge of the monitor with both hands, tilt the screen to the best condition for working.
Attention
• Be sure that the cables are correctly connected.
CDplayer,etc

7
English
Displaying the Screen
1. Press to turn on the monitor.
The monitor’s power indicator lights up blue.
2.
Turn on the PC.
The screen image appears.
If an image does not appear, refer to “No picture” (page 8) for additional advice.
If using the FDX1501T proceed with installation and calibration of the touch panel driver.
Attention
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Turning off the main power
switch or unplugging the power plug completely shuts off power supply to the monitor.
Installing the Touch Panel Driver (FDX1501T)
Attention
• The user account to be used for installing the touch panel driver must have the “Administrators” privilege.
• When reinstalling the touch panel driver to update the driver, etc., restart the PC after uninstalling the driver and then
install it.
1. Uninstall the other touch panel driver, if it is installed.
2.
Install the touch panel driver according to the instructions included in the CD-
ROM.
For how to install the touch panel driver, see the Touch Panel Driver User’s Manual (on the CD-ROM).
3.
Use the USB cable (MD-C93) to connect the monitor and the PC.
USB
4.
Restart the PC.
Calibrating the Monitor (FDX1501T)
Calibrate the monitor according to the Touch Panel Driver User’s Manual (on the CD-ROM).
Connectors
on the PC
Connectors
on the monitor
USBCableMD-C93(supplied)

8
Troubleshooting
● No picture
If a problem still remains after applying the suggested remedies, contact your local dealer.
Problem Possible cause and remedy
1. No picture
• Powerindicatordoesnotlight.
• Checkwhetherthepowercordisconnected
properly.
• Turnoffthemainpower,andthenturnitonagaina
fewminuteslater.
• Turnthemainpowerswitchon.
• Press .
• Powerindicatorislightingblue. • Increase<Brightness>,<Contrast>,and/or<Gain>
intheAdjustmentmenu.
• Powerindicatorislightingorange. • Switchtheinputsignal.
• Operatethemouseorkeyboard.
• CheckwhetherthePCisturnedon.
2. The message below appears. Thismessageappearswhenthesignalisnotinput
correctlyevenwhenthemonitorfunctionsproperly.
• Thismessageappearswhennosignalis
input.
Example:
• Themessageshownleftmayappear,because
some PCsdonotoutputthesignalsoonafter
power-on.
• CheckwhetherthePCisturnedon.
• Checkwhetherthesignalcableisconnected
properly.
• Switchtheinputsignal.
• Themessageshowsthattheinputsignalisout
ofthespeciedfrequencyrange.(Suchsignal
frequencyisdisplayedinred.)
Example:
fD: Dotclock
(Displayedonlyduringdigitalsignalinput)
fH: Horizontalscanfrequency
fV: Verticalscanfrequency
• CheckwhetherthePCisconguredtomeetthe
resolutionandverticalscanfrequencyrequirements
ofthemonitor(“CompatibleResolutions”inthe
SetupManual.).
• RebootthePC.
• Selectanappropriatedisplaymodeusingthe
graphicsboard’sutility.Refertothemanualofthe
graphicsboardfordetails.
Note
• If there is a problem with the image displayed or with the touch panel, refer to the Monitor User’s Manual (on the CD-
ROM).

1
Deutsch
SICHERHEITSSYMBOLE
In diesem Handbuch und für dieses Produkt werden die unten aufgeführten Sicherheitssymbole verwendet. Sie
geben Hinweise auf äußerst wichtige Informationen. Bitte lesen Sie diese Informationen sorgfältig durch.
VORSICHT Die Nichtbefolgung von unter VORSICHT angegebenen Anweisungen kann schwere
Verletzungen oder sogar lebensbedrohende Situationen zur Folge haben.
ACHTUNG Die Nichbeachtung unter ACHTUNG angegebener Informationen kann mittelschwere
Verletzungen und/oder Schäden oder Veränderungen des Produkts zur Folge haben.
Weist auf eine zu beachtende Warnung hin. Beispiel: Das Symbol steht für Gefahr,
z. B. „Risiko eines Stromschlags“.
Weist auf eine unerlaubte Vorgehensweise hin. Beispiel: Das Symbol weist auf eine
verbotene Vorgehensweise hin, z. B. „Nicht auseinander nehmen“.
Weist auf eine zwingend zu befolgende Vorgehensweise hin. Beispiel: Das Symbol
steht für einen allgemeinen Hinweis z. B. „Erden des Geräts“.
Kompatible Auösungen
Der Monitor unterstützt die nachfolgend aufgeführten Auösungen.
Analoger Eingang (D-Sub)
Auösung Geeignete Signale Vertikale Abtastfrequenz Punktfrequenz
640×400 NECPC-9801,PC-9821AP2 biszu 70Hz
80MHz
(Max.)
640×480 VGA,VESA biszu75Hz
720×400 VGATEXT 70Hz
800×600 VESA biszu75Hz
1024×768*VESA biszu75Hz
Digitaler Eingang (DVI-D)
Auösung Geeignete Signale Vertikale Abtastfrequenz Punktfrequenz
640×480 VGA 60Hz
65MHz
(Max.)
720×400 VGATEXT 70Hz
800×600 VESA 60Hz
1024×768*VESA 60Hz
Eine Grakkarte ist erforderlich, die Anforderungen der Standards VESA erfüllt.
* Empfohlene Auösung
Über das Installationshandbuch und das Benutzerhandbuch
Installationshandbuch
(das vorliegende Handbuch)
Informationen zum Installieren des Monitors und zur
Inbetriebnahme.
Benutzerhandbuch zu
diesem Monitor*
Beschreibt die Anwendungsinformationen für den Monitor,
wie zum Beispiel Bildschirmjustierungen, Einstellungen
und technischen Daten.
Benutzerhandbuch für
den Touch-Panel-Treiber*
Beschreibt die Installation und Verwendung des Touch-
Panel-Treibers.
* PDF-Datei auf CD-ROM (Erfordert die Installation von Adobe Reader.)
Kein Teil dieses Handbuchs darf ohne die vorherige schriftliche Zustimmung von EIZO Corporation in irgendeiner
Form oder mit irgendwelchen Mitteln – elektronisch, mechanisch oder auf andere Weise – reproduziert, in einem
Suchsystem gespeichert oder übertragen werden.
EIZO Corporation ist in keiner Weise verpichtet, zur Verfügung gestelltes Material oder Informationen vertraulich
zu behandeln, es sei denn, es wurden mit EIZO Corporation beim Empfang der Informationen entsprechende
Abmachungen getroffen. Obwohl größte Sorgfalt aufgewendet wurde, um zu gewährleisten, dass die Informationen
in diesem Handbuch dem neuesten Stand entsprechen, ist zu beachten, dass die Spezikationen der Monitore von
EIZO ohne vorherige Ankündigung geändert werden können.