Ekorower Sw102 User manual

浙江图谱智能科技有限公司

WWW.TOPOLOGY-TECH.COM

文件编号

TOP-SW102-U-01-1.0

版本号 1.0

SW102 Display technical specifications

Product Name：Intelligent OLED display

Part Number：SW102

Zhejiang Topology Intelligent Technology Co., Ltd WWW.TOPOLOGY-TECH.COM

Room 702,Building A, DIC, No.1190 Bin’an Rd. Hangzhou, Zhejiang

TEL： 0571-87633029

Signature Date

Write

Checked by

Approved by

A. Product introduce

................................

1 Product name and model

2 Product Introduction

................................

3 Range of application

................................

4 Appearance and size

................................

5 Display coding rules

................................

B. Product manual

................................

1 Specifications

................................

2 Functional overview

................................

3 Installation

................................

4 Interface

................................

4.1 Boot interface

（

4.2 Basic interface

................................

4.2 Function interface

4.3 Function interface

4.4

setting interface

4.5 *mapping the mobile phone (connect to the mobile phone APP)

5 Definition of buttons

................................

6 Operation

................................

6.1Turn on/off

................................

6.2Assist mode select

6.3 Display information switch

第2页/共20 页

Content

................................

1 Product name and model

................................

（

Can be customized as required）

................................

4.2 Function interface

（I） ................................

................................

4.3 Function interface

（II） ................................

................................

setting interface

................................................................

................................

4.5 *mapping the mobile phone (connect to the mobile phone APP)

................................

6.2Assist mode select

................................................................

...............................

6.3 Display information switch

................................

.......... 4

................................

.............................. 4

................................

....... 4

................................

....... 4

................................

....... 4

................................

......... 5

................................

..................... 6

................................

..................... 6

................................

......... 6

................................

.......................... 7

................................

.............................. 7

................................

...... 7

................................

........ 8

................................

........................ 8

................................

....................... 9

................................

..... 9

4.5 *mapping the mobile phone (connect to the mobile phone APP)

........ 10

................................

..... 10

................................

........................ 11

................................

............ 11

...............................

11

................................

............... 11

6.4 Walk assist mode

6.5 Headlight on/off

6.6Power indicator

................................

7 User settings

................................

7.1 enter setting status

7.2unit setting

................................

7.3On/off passwo

rd setting

7.4 Wheel diameter information

7.5 Speed limitation information

7.6 Battery information

7.7 Automatic shutdown time

7.8 System information

7.9 Reset

................................

8 Data clearance

................................

9 Error information

................................

10 Wire definition

................................

C. Note

................................

第3页/共20 页

6.4 Walk assist mode

................................................................

................................

6.5 Headlight on/off

................................................................

................................

7.1 enter setting status

................................

rd setting

................................

7.4 Wheel diameter information

................................

7.5 Speed limitation information

................................

7.6 Battery information

................................

7.7 Automatic shutdown time

................................

7.8 System information

................................

................................................................

...............................

................................

12

................................

. 12

................................

.... 13

................................

................... 13

................................

............................. 13

................................

............ 14

................................

.................... 14

................................

........... 15

................................

........... 16

................................

............................ 16

................................

................ 17

................................

............................ 17

................................

...................... 18

................................

............... 18

................................

........... 19

................................

............. 20

...............................

20

A. Product introduce

1

Product name and model

Intelligent OLED display, model

：

2Product Introduction

 Minimalist design, process

without

 Super contrast 1.3 -

inch monochromatic OLED screen

 Excellent outdoor design

with

 Micro USB

serial communication



Bluetooth function is optional,

3Range of application

Suitable for electric power assist

bicycle

4 Appearance and size

The material of product shell is

ABS + PC

第4页/共20 页

Product name and model

：

SW102

without

screw assembly

inch monochromatic OLED screen

with

IP65 waterproof

serial communication

port, convenient for

maintenance services

Bluetooth function is optional,

which adapt for mobile phone APP

bicycle

in accordance with the standard of

EN15194

ABS + PC

. And the material of the window is

2.5D tempered glass

maintenance services

EN15194

2.5D tempered glass

.

5Display coding rules

As shown as above pi

cture, C1 is the manufacture factory code

1701

is the manufacture year and week number

A

means the hardware version

001

is t

0001

第5页/共20 页

cture, C1 is the manufacture factory code

is the manufacture year and week number

;

means the hardware version

;

is t

he firmware version number

0001

is the product serial number

B. Product manual

1 Specifications

①Power supply：DC 24V/36V

/48V

②Rated current：12mA

③Shutdown leakage current：

<1uA

④Screen specification：1.3”

OLED

⑤communication method：

UART

⑥Operating temperature：-20°

C ~ 60

⑦Storage temperature：-30°

C ~ 80

⑧Waterproof level：IP65

2Functional overview

①Four buttons, easy to operate

② Use password to turn on

③Km / miles

④Speed display: Real-

time speed

⑤Five stalls of power assist

control

⑥

Six levels of electricity instructions

battery BMS information.

⑦Headlight indicator: H

eadlight on/off status indication (need information from controller)

⑧Mileage display

: Subtotal mileage

⑨Riding time （TRIP TIME）

display

⑩UART communication port（

M

setting

⑪6km/h walk assist function

⑫ *

Bluetooth communication function, setting parameter and update firmware and

information mapping by mobile phone connected to the display.

⑬Error code indication

第6页/共20 页

/48V

<1uA

OLED

（64*128 dots）

UART

（default）

C ~ 60

°C

C ~ 80

°C

time speed

（SPEED）、maximum speed（MAX）、

average speed

control

：0-4level (OFF-ECO-TOUR-SPORT-

TURBO

Six levels of electricity instructions

：1-5level power，

and under voltage prompts, and provide

eadlight on/off status indication (need information from controller)

: Subtotal mileage

(TRIP), total mileage (ODO)

display

M

icro USB），convenient

for system maintenance and parameter

Bluetooth communication function, setting parameter and update firmware and

information mapping by mobile phone connected to the display.

average speed

（AVG）

TURBO

）

and under voltage prompts, and provide

eadlight on/off status indication (need information from controller)

for system maintenance and parameter

Bluetooth communication function, setting parameter and update firmware and

3Installation

①

Open the display lock clip, set the display in the left handlebar (standard handlebar

size:Φ22.2

).Adjust to a position easy to operate tighten and fix

torque: 0.8N.m.*Note:

Damage caused by excessive torque is not covered by the warranty

②

display connected with controller by 5 pin connector as required drawings.

4 Interface

4.1 Boot interface（Can be

custom

①Boot interface,

2seconds show when turn on the display

第7页/共20 页

Open the display lock clip, set the display in the left handlebar (standard handlebar

).Adjust to a position easy to operate tighten and fix

the screw

by M3 hexagon

Damage caused by excessive torque is not covered by the warranty

display connected with controller by 5 pin connector as required drawings.

custom

ized as required）

2seconds show when turn on the display

Open the display lock clip, set the display in the left handlebar (standard handlebar

by M3 hexagon

. Tightening

Damage caused by excessive torque is not covered by the warranty

.

display connected with controller by 5 pin connector as required drawings.

4.2 Basic interface

①

power assist level and walk mode: 0

TOUR、SPORT、TURBO，

and WALK mode.

②

current speed and unit show the current riding speed.

③ Subtotal mileage and unit: a

ccurate to one after the decimal point

④ power indicator show 1-

5 level power and under voltage. Then icon blinks when under v

⑤

Headlight show when the headlight is on.

⑥

Bluetooth indicate show when the mobile phone is connected.

4.2 Function interface（I）

第8页/共20 页

power assist level and walk mode: 0

-

4 files assist level, power from low to high are: OFF

and WALK mode.

；

current speed and unit show the current riding speed.

ccurate to one after the decimal point

, maximum is

5 level power and under voltage. Then icon blinks when under v

Headlight show when the headlight is on.

Bluetooth indicate show when the mobile phone is connected.

4 files assist level, power from low to high are: OFF

、ECO、

, maximum is

999.9；

5 level power and under voltage. Then icon blinks when under v

oltage.

Lev

df

PAS levers

PAS LEVERS

Rear speed

speed levers

① riding time show

ride duration. The rest information is the same as basic interface.

4.3 Function interface（II）

① average speed（AVG）

show the average speed of the riding

②maximum speed（MAX）

show the

③ total mileage ODO

show the mileage of the whole riding,

The rest information is the same as basic

4.4 setting interface

①

setting interface prompt current interface is for setting

②

exit item and select bar: select short press the function to exit the setting interface to return to the

第9页/共20 页

ride duration. The rest information is the same as basic interface.

show the average speed of the riding

；

show the

maximum speed of the riding；

show the mileage of the whole riding,

maximum

is 9999km.

The rest information is the same as basic

interface.

setting interface prompt current interface is for setting

exit item and select bar: select short press the function to exit the setting interface to return to the

ride duration. The rest information is the same as basic interface.

is 9999km.

exit item and select bar: select short press the function to exit the setting interface to return to the

basic interface; [ ] select menu

；

③Unit Settings: unit settings of

speed

④

wheel diameter information: wheel diameter

⑤This password Settings:

users

password function)

⑥Automatic shutdown, after

5 minutes(the d

automatically.

⑦ speed limitation information:

T

⑧ battery information: T

he information about the battery

⑨ hardware information: T

he information about the hardware

⑩ reset: R

eset to factory settings

4.5 *

mapping the mobile phone(connect to the mobile phone APP)

The Bluetooth

icon of the display is shown

①

setting the parameter of the display through mobile phone APP.

②Call or SMS mapping to

display

③

Navigation icon mapping display function

5 Definition of buttons

Turn on/off：，

Function

第10 页/共20 页

；

speed

and mileage

wheel diameter information: wheel diameter

information

adapt for the display

users

can change the password or shut down (

5 minutes(the d

efault)

no operation on the display, it will

T

he allowed maximum

speed information of the bike

he information about the battery

he information about the hardware

eset to factory settings

mapping the mobile phone(connect to the mobile phone APP)

icon of the display is shown

. The mobile phone is connected with the APP.

setting the parameter of the display through mobile phone APP.

display

（only show the caller number）

Navigation icon mapping display function

Function

button：，Adjust button+：，

Adjust button

adapt for the display

can change the password or shut down (

turn offthe defaulted

no operation on the display, it will

shutdown

speed information of the bike

. The mobile phone is connected with the APP.

Adjust button

-：

6 Operation

6.1Turn on/off

Maintain the normal connection

button when is display is off. Display

work. Long press (2 seconds)

the display and the speed is 0

for 5 minutes

6.2Assist mode select

Press or

to select the assist mode and change

modes:

OFF/ECO/TOUR/SPORT/TURBO

no assist power.（

assist mode select as below picture

TURBO Mode SPORT

Mode

6.3 Display information switch

Information switches from trip miles, riding time, average speed, max speed, total mileage by

short press

when the display is on

TIME)-> average speed

(AVG), maximum speed (MAX), total mileage (ODO).

Mode switch as below pictures:

第11 页/共20 页

Maintain the normal connection

of the display and the controller

. Long press (2 seconds)

button when is display is off. Display

shows the boot interface and enter

s the basic interface

button when the

display is on. Display closed. If no operation to

for 5 minutes

,display will turn off automatically

.

to select the assist mode and change

the assist power mode. There are 5

OFF/ECO/TOUR/SPORT/TURBO

. Default ECO mode when display turned on. OFF means

assist mode select as below picture

）

Mode

TOUR Mode ECO ModeOFF

Mode

Information switches from trip miles, riding time, average speed, max speed, total mileage by

when the display is on

. It shows loop from

trip miles (TRIP)

(AVG), maximum speed (MAX), total mileage (ODO).

. Long press (2 seconds)

s the basic interface

to start

display is on. Display closed. If no operation to

.

the assist power mode. There are 5

. Default ECO mode when display turned on. OFF means

Mode

Information switches from trip miles, riding time, average speed, max speed, total mileage by

trip miles (TRIP)

->riding time (TRIP

(AVG), maximum speed (MAX), total mileage (ODO).

6.4 Walk assist mode

Long press

button for 2 seconds, bike entered walk assist mode. When

button to exit walk assist mode

assist status)：

6.5 Headlight on/off

Long press

button for 1 second

icon shows on the interface. Long press

The icon of headlight is off.

第12 页/共20 页

button for 2 seconds, bike entered walk assist mode. When

button to exit walk assist mode

.Walk assist mode switch as below

pictures (only in the walk

button for 1 second

，the headlight is turned on（need support

of controller

icon shows on the interface. Long press

button for 1 second again, the headlight is turned off.

button for 2 seconds, bike entered walk assist mode. When

is shown, loose

pictures (only in the walk

of controller

）.Headlight

button for 1 second again, the headlight is turned off.

6.6Power indicator

When the battery works

normal,

capacity.

When the battery power reaches the under voltage warning value, only frame

icon is displayed and flash

to remind the user to charge immediately. The battery power is shown

below:

Percentage of battery power

（

7User settings

S

etting items: unit, turn on password,

information, time period of

automatically

( * means

fixed items, do not provide user settings options

7.1enter setting status



10 seconds within display turned on, long press

interface

. On this status users can set and view the

No.

Percentage on

the

display(SOC)

Level on the

display

1 C≤5%

outer border

flashes

2 5%<C<15%

1 level power

3 15%≤C<35% 2

level power

4 35%≤C<55% 3

level power

5 55%≤C<75% 4

level power

6 C≥75% 5

level power

第13 页/共20 页

normal,

the battery power

shows 5 levels according to the

When the battery power reaches the under voltage warning value, only frame

to remind the user to charge immediately. The battery power is shown

（

C）and power level table

etting items: unit, turn on password,

*wheel diameter, *

speed limitation information

automatically

shut down, *system information, reset to factory setting.

fixed items, do not provide user settings options

)

10 seconds within display turned on, long press

（3seconds）

, system enter the data setting

. On this status users can set and view the

parameters

of the display.

Level on the

display

Voltage（24V)

Voltage（

36V)

outer border

flashes

U≤23.1 U≤33

1 level power

23.1<U<24.5 33<U<34.

7

level power

24.5≤U<25.1 34.7

≤U<35.

level power

25.1≤U<25.6 35.8

≤U<36.

level power

25.6≤U<27 36.7

≤U<38.5

level power

U≥27 U≥38.5

shows 5 levels according to the

battery

When the battery power reaches the under voltage warning value, only frame

of the battery

to remind the user to charge immediately. The battery power is shown

as

speed limitation information

, *battery

shut down, *system information, reset to factory setting.

, system enter the data setting

of the display.

36V)

Voltage（48V)

U≤42.9

7

42.9<U<45.1

≤U<35.

8 45.1≤U<46.5

≤U<36.

7 46.5≤U<47.5

≤U<38.5

47.5≤U<50.1

U≥50.1

 Long press (3 seconds）

interface, short press

to exit and save the setting status.



User settings interface state, if 10 seconds without the operation,

state, do not save the parameter settings

 On data setting state,

short press

 Short press

to switch setting items

7.2unit setting

Press /

to select setting item in unit setting interface.

setting interface. S

hort press M in KM/Mile file to switch KM,Mile unit.

Km：T

he unit of trip mileage and total mileage is Km. The unit of current speed, average

maximum speed is KM/H.

Mile：T

he unit of trip mileage and total mileage is Mile. The unit of current speed, average speed,

and maximum speed is MPH

.

7.3On/off password setting

Enter on/off password setting, press

press to select OFF/ON,

to turn on or turn off the password on/off function; Choose ON to turn

on the on/off password function and set the password; short press

第14 页/共20 页

to exit and save the setting status. Select

to exit and save the setting status.

User settings interface state, if 10 seconds without the operation,

display

returns to normal riding

state, do not save the parameter settings

.

short press

/to switch setting items

to switch setting items

circularly.

to select setting item in unit setting interface.

Press（short）

hort press M in KM/Mile file to switch KM,Mile unit.

he unit of trip mileage and total mileage is Km. The unit of current speed, average

he unit of trip mileage and total mileage is Mile. The unit of current speed, average speed,

.

Enter on/off password setting, press

/

to select setting item. Switch to

to turn on or turn off the password on/off function; Choose ON to turn

on the on/off password function and set the password; short press

to switch password bit from

to exit and save the setting status. Select

[Exit] on the setting

returns to normal riding

in exit file to return

he unit of trip mileage and total mileage is Km. The unit of current speed, average

speed;

he unit of trip mileage and total mileage is Mile. The unit of current speed, average speed,

to select setting item. Switch to

OFF/ON item, short

to turn on or turn off the password on/off function; Choose ON to turn

to switch password bit from

left to right, short press /

previous level after setting.

Interface show as below：

Boot again, you need to use a new password to boot, or

after 25s.

7.4 Wheel diameter information

In wheel information interface,

wheel diameter. Return to the

setting interface

Wheel diameter v

alue can be set:

28inch、29inch

The interface is shown as below

第15 页/共20 页

to adjust the code value. C

hoose Exit (after save) to retu

Boot again, you need to use a new password to boot, or

display will

automatically shut down

In wheel information interface,

26 inch

es means current display is setting for the bike of 26inch

setting interface

by short press .

alue can be set:

16inch、18inch、20inch、22inch、

24

The interface is shown as below

：

hoose Exit (after save) to retu

rn to

automatically shut down

es means current display is setting for the bike of 26inch

24

inch、26inch、700C、

7.5Speed limitation information

Speed limitation information indicate

show the

changes through the serial port

D

efault allowed maximum speed:

Interface shown as below：

7.6 Battery information

R

eturn setting interface in battery information interface

BAT %：battery power；

BAT V：battery voltage；

Charge：

numbers of charge cycles.

Interface shown as below:

第16 页/共20 页

Speed limitation information indicate

s

the maximum speed allowed in the current system

changes through the serial port

)

efault allowed maximum speed:

25KM/H

eturn setting interface in battery information interface

by short press .

numbers of charge cycles.

the maximum speed allowed in the current system

(only

7.7Automatic shutdown time

Press /

to choose automatic shutdown time

to save and return the

setting interface.

Interface shown as below:

7.8 System information

Press

to return to setting interface in system information interface.

S/N：device ID；

FW Ver：

Firmware version number

HW Ver：Hard

ware version number

Interface shown as below：

第17 页/共20 页

to choose automatic shutdown time

（default 5 minutes），

in auto off interface. Press

setting interface.

to return to setting interface in system information interface.

Firmware version number

；

ware version number

；

in auto off interface. Press

7.9 Reset

Reset, press /

to choose setting, switch to

The parameter reset to the factory state. Press Exit to exit the page and return to previous level.

Interface shown as below:

8 Data clearance

10 seconds after

display turned on, long press

short press p

op up the confirmation window

to clearance trip mileage(TRIP), riding time(TRIP TIME), average speed(AVG) and maximum

speed(MAX), and return to operation interface.

clearance if no operation in 5 seconds.

第18 页/共20 页

to choose setting, switch to

YES item，short press

The parameter reset to the factory state. Press Exit to exit the page and return to previous level.

display turned on, long press

（3 seconds），

enter the data clearance interface,

op up the confirmation window

, press / to choose

item

to clearance trip mileage(TRIP), riding time(TRIP TIME), average speed(AVG) and maximum

speed(MAX), and return to operation interface.

Display will return to riding interface without data

clearance if no operation in 5 seconds.

to restart the display.

The parameter reset to the factory state. Press Exit to exit the page and return to previous level.

enter the data clearance interface,

item

, short press again

to clearance trip mileage(TRIP), riding time(TRIP TIME), average speed(AVG) and maximum

Display will return to riding interface without data

Normal shutdown and p

ower

9Error information

The display can alert the bike

failure,

code. Interface shown as below:

Error code definition

Error code table:

Error code

"04" shown at speed

throttle doesn't turn back to zero position

"05" shown at speed

"07" shown at speed

"08" shown at speed

failure of motor's hall signal wire

"09" shown at speed

failure of motor's phase wire

"11" shown at speed

failure of the controller's temperature

"12" shown at speed

failure of the current sensor

第19 页/共20 页

ower

-down will not make the above data

clear

failure,

if failure detected, the display

interface

Fault description

throttle doesn't turn back to zero position

Check if the throttle return to zero position

throttle failure

overvoltage protection

check the

failure of motor's hall signal wire

failure of motor's phase wire

failure of the controller's temperature

sensor

failure of the current sensor

clear

.

interface

will show the error

Checking methord

Check if the throttle return to zero position

check throttle

check the

voltage of the battery

check the motor

check the controller

"13" shown at speed

failure of the temperature of the battery

"14" shown at speed

failure of the temperature of the motor

"21" shown at speed

failure of the speed sensor

"22" shown at speed

failure of the BMS communication

"30" shown at speed

10 Wire definition

Wires out of the display

No.

1

2

3

4

5

C. Note

 In the use of the display

, pay attention to the security, do not plug the

the power is on.

 Try to avoid use exposure

sunlight.

 When the display can’

t be used normally

第20 页/共20 页

failure of the temperature of the battery

failure of the temperature of the motor

failure of the speed sensor

check the position of the speed sensor

failure of the BMS communication

communication failure

check the connector of the controller

wires connect to the display connector to controller

Table 1 wires definition

Color

Function

Red(VCC)

Blue(Kp)

Power control wire of the controller

Black (GND)

GND of display

Green(RX) D

ata receive of the

Yellow(TX) Data

transmit

, pay attention to the security, do not plug the

display

in harsh environments like

heavy rain, heavy snow,

t be used normally

, it should be send to repair

as soon as possible

check the battery

check the motor

check the position of the speed sensor

check the battery

check the connector of the controller

wires connect to the display connector to controller

Function

VCC

Power control wire of the controller

GND of display

ata receive of the

display

transmit

of the display

display

in and out the when

heavy rain, heavy snow,

and strong

as soon as possible

.

EKOROWER SW102 User manual

Popular Bicycle Accessories manuals by other brands