Elecom LBT-PCVM01 Series User manual

Supports Bluetooth 2.1 + EDR
Bluetooth Headset for Voice Chat
LBT-PCVM01Series User's Manual V01
Part Names
Overall headset
How to wear
Blue
(power on)
Flashing red and blue
(pairing mode)
Voice Chat
Power ON/OFF
Power ON
Power OFF
Talking on a mobile phone
Pairing with a mobile phone
Receiving a call
Hanging up the call
Calling
Redialling (Most recent number)
Thank you for purchasing this quality ELECOM product. This user's manual
describes how to use this Bluetooth headset and precautions for using the headset
safely. Ensure that you have read this manual before using the product. After
reading this manual, store it somewhere safe for future reference.
Product features
This product is a Bluetooth headset optimised for voice chat over Skype, Windows
Live Messenger, and other applications. This headset makes it possible to voice
chat without bothersome cables over a wireless connection with Bluetooth.
This product supports Bluetooth 2.1, so it can be safely and easily paired with
devices that meet the same standard.reading this manual, store it somewhere safe
for future reference.
Makes comfortable voice chatting with clear audio possible from the 28-mm diameter
large headphone unit and the microphone that extends to your mouth.
Equipped with a large capacity lithium polymer battery, achieves approximately 11 hours
of continuous talk time with a single charge (2 hours) and over 150 hours of standby time.
Can be used together with a Bluetooth-compatible mobile phone.
Necessary information when connecting:
Product device name when detected
in a search from a mobile device or a PC:
Link Key:
LBT-VM01
0000 (Four zeros)
* Link Key entry is required when connecting to devices using Bluetooth 2.0 or earlier.
Package Contents
The package for this product contains the following items.
Please confirm the package contents before using this product.
Headset 1 unit
USB charging cable 1
User's Manual This document
Important Notice
The included USB charging cable is meant for use with this product ONLY. Do not use this cable
for any purpose other than charging this product. Even if the connector shape is the same, the
pin assignment (wiring) may be different, which is a cause of malfunction. Similarly, do not use
the charging cable included with another product to charge this product.
Wear the headset by placing it over your head so that the
headphone unit touches your ear.
Then adjust the position of the microphone.
Unit section
Charge the headset by connecting it to the USB port on a PC with the included
USB charging cable.
When the amount of remaining battery power drops, the LED flashes red and a
warning sound is emitted every 20 seconds.
It takes about 2 hours to fully charge this product.
If the LED lamp has not turned off after 2 hours, disconnect the charging
cable and stop charging. Charging for more than 2 hours can shorten the
battery life and may lead to device failure.
This product cannot be used while charging.
[Charging connection]
PC Series A
connector
USB charging cable
Charging connector
Main unit
On while charging.
The LED lamp turns off
when charging is complete.
Charge by connecting to
the USB port on a PC.
Connect the charging connector for the included USB charging cable to the
charging connector on the product.
The LED lamp turns red and charging begins.The LED lamp turns off when
charging is complete.
When using the product with a PC, the product must be paired (task to first register
the device) with the PC that is used.The procedure for pairing using the ELECOM
LBT-UAN03 USB adapter is explained here.
For operations on the device that will be used, read the user's manual for that device.
* Screen appearance may change, but the procedure is the same.
Connect the series A connector of the USB charging cable to the USB ports
of your PC, etc.
Press and hold the multi-function button while the product is in the power off
state.When the LED lamp alternately flashes red and blue (8 seconds or
more), release the button.
For the 8 seconds while the button is pressed, the LED indicator changes as shown next.
Click the Bluetooth icon on the
taskbar of the PC.
Select [Add a Device].
Select the [LBT-VM01] icon and
click [Next].
Click [Close].
If the connection is
successfully completed,
the window on the right is
displayed.
This completes the pairing.
You can cancel the
connection by clicking
[Disconnect].
The operating methods will differ according to the software used.
For details, read the manual for the software used or for the operating system.
You may be required to switch (select) the speaker/microphone
depending on the voice chat software used.
Perform talk/end operations on the PC.
Press and hold the multi-function button until the LED lamp flashes (approx. 5
seconds). The product attempts to connect with the previously connected
device.To change the device to connect to, turn off the device that was
previously used or disable its Bluetooth function until the connection is
complete with the device you want to use.
You may need to approve or authenticate the headset connection (device
name LBT-VM01) or perform a connection procedure from the mobile device.
Press and hold the multi-function button of this product for 4 seconds or more.
The LED lamp blinks blue and turns off, indicating the power is now OFF.
If you release the multi-function button before the power is turned off,
the redial function may operate and make a call, depending on the
mobile phone.
About the auto power-off function
If there is no signal from a connected device such as when turning a mobile
phone off, or no paired devices are detected within approx. 10 minutes after
turning this product on, this product will automatically turn off.
* While the power is on, the LED lamp slowly flashes blue.
This product can be combined with a mobile phone and used as a headset.
The features described below can only be used when paired with
the headset profile (HSP) and the hands-free profile (HFP).
The behaviour of the mobile phone for the headset operations
explained below may differ depending on the specifications of the
mobile phone.
After switching the product to pairing mode, search for the product on the
mobile phone. The device name "LBT-VM01" will appear on the search
screen, so select it and register it.
To use this product with a mobile phone, we recommend you pair the product
with the hands-free profile (HFP) so the mobile phone's functions can be used on
the product. When there is no hands-free profile, pair the product with the
headset profile (HSP).
Press the multi-function button when you hear the incoming call sound from
the headphone.
Depending on the mobile phone, you may not be able to configure a ring tone
for the Bluetooth headset.This is related to its specification.
While a call is connected, press the multi-function button once to hang up the call.
After placing a call on the mobile phone, switch to the product.
[Basic operation]
For iPhone4 After the call, change the sound output setting to LBT-VM01
(the device name for this product).
For Android After the call, press the Menu button and press the Bluetooth
button.
When paired with the HFP (hands-free profile), press the multi-function
button twice and the phone can redial the last called number.
You cannot call back the party that previously called you such as a missed call.
Basic Specifications
*1 Theoretical value. Transmit range is also affected by the Bluetooth capability of the target
device and the conditions of the surrounding environment.
*2 When there is a long distance between this unit and Bluetooth device, the power
consumption for each will increase resulting in shorter available time.
Due to interference, it may sometimes not be possible to use in combination
with a 2.4 GHz band wireless LAN (IEEE802.11g/b/n).
It is not guaranteed that all Bluetooth devices will work with this product.
Headphone unit The part that is worn on the ear. According to the application, wear
it on whichever ear makes it easier to use. When wearing, adjust
the position so the unit touches the centre of your ear.
Headband The length can be adjusted.
Microphone The microphone for talking. It can be rotated approx. 300-degrees
to adjust its position. It can also be worn on the left ear.
Multi-function button This button turns the power ON/OFF, as well as performs the functions
listed below:
Power ON Press and hold (approx. 5 seconds) until the LED lamp turns blue to turn
on the power and attempt to connect to the device that was previously
connected. The LED lamp will flash slowly (once every few seconds for
one second) when the connection is complete. If no device was previ-
ously connected, it waits for a connection from another paired device.
The power turns off after about 10 minutes if there is no connection op-
eration from a device.
Pairing mode In the power off state, press and hold (approx. 8 seconds or more)
until the LED lamp alternately flashes red and blue, then release.
Power OFF When the power is on, press and hold (approx. 4 seconds or more)
until the LED lamp flashes red to turn the power off.
LED lamp The LED lamp that indicates the power and pairing state.
For the LED indications and product states, read the description for
the multi-function button.
Charging connector Insert the included USB charging cable when charging the head-
set.
The connector is protected with a cover.
Volume switch Move the switch left and right to adjust the volume.
Charging
Pairing (Registering with the device)
Basic Operation
Article No. LBT-PCVM01 Series (Device name: LBT-VM01)
Carrier Signal 2.402 - 2.480 GHz
Bluetooth Specifications Bluetooth Ver.2.1+EDR
Frequency diffusion method FHSS (Frequency Hopping Spread Spectrum)
Transmit range Class 2 Max. radius 10 m (if unobstructed) *1
Supported Profiles HSP (Headset Profile), HFP (Heads-free Profile)
Number of simultaneous devices Calling device x 1
Max. no. of pairing devices 8
Continuous standby time Approx. 150 hours *2
Conversation time Approx. 11 hours *2
Environment
conditions
When
operating
Temperature5- 35°C
Relative humidity20 - 80% (no condensation)
When
storing
Temperature -5 - +50°C
Relative humidity20 - 80 % (no condensation)
Input voltage 5 VDC (charged from USB power)
Battery type Lithium polymer battery
External dimensions (W x H x D) 109 x 168 x 51 mm (Excl. protrusions)
Weight Approx. 47 g

1st edition, February 25, 2012 ELECOM Co., Ltd
© 2012 ELECOM Co., Ltd. All Rights Reserved.
Bluetooth Headset for Voice Chat User's Manual
LBT-PCVM01Series
Do not operate while driving an automobile.
Do not use the headset while driving an automobile. Stop using the product
while walking, on train platforms, at intersections, and at construction sites, and
carefully check your surroundings.
If an abnormality is found:
When the product emits a strange smell or smoke, stop using it immediately
and turn it off. If charging, unplug it from the PC or USB power. After doing this,
stop using this product and contact the retailer.
Exercise caution when setting the ringtone volume.
When using this product after pairing it with a mobile phone, the sound of the
ringtone may surprise you and cause an accident, affecting your heart.
Do not disassemble.
Not including operations that are performed in accordance with the directions
of this document, do not repair, modify, or disassemble this product yourself.
Doing so may cause electric shock, fire, or burns.
Do not damage the cord used for connection.
Doing so may cause fire or disconnection.
Do not use the product in hospitals or in aircraft.
Under no circumstances use this product in locations where the highest levels
of safety are demanded.This product may cause malfunctions in specialised
medical facilities and aircraft instruments.
Do not use or leave in areas that contain a large amount of moisture.
If liquid enters the inside of this product, it may cause breakdown, fire, or
electric shock.
Do not leave in areas that are reachable by small children.
This may lead to an unexpected incident where this product is accidentally ingested.
Periodically charge the product.
When not using this product for extended periods of time, charge it about once a
month.
When using the product, follow the instructions in the user's
manual for the connected device.
This product can be used with PCs and mobile phones via wireless communications,
but the configuration procedures and precautions differ according to the connected
device.When using the product, carefully read the user's manuals for these products
and follow their precautions.
Do not use this product if it creates radio wave interference
with in-car devices.
Depending on the model of car that is used, radio wave interference may occur
between this product and in-car devices.When something like this occurs, cease
use of this product.
When finished charging, always unplug the charging cable. If
the product is not finished charging even when the specified
charging time has ended, stop charging the product and
unplug the charging cable.
If the product is charged for a length of time that exceeds the specified
charging time, there is a risk of the internal battery generating heat, catching
fire, or bursting. This may also affect the lifespan of the battery.
Do not use a charging device other than the included charging device.
This product uses a lithium polymer battery for its internal power supply. There
is a risk of fire if this battery is mishandled. Only use the included USB
charging cable to charge the product. If you use a different cable, there is a risk
of fire or malfunction. Under no circumstances use a different cable.
Never leave this product inside a car.
If this product is left for a long period of time inside a car under high temperatures, there
is considerable risk that this will result in rupture of the internal battery, fire, or breakdown.
Do not leave under high temperatures.
This product is a precision electronic device. Avoid using or storing this product in
high temperature or humid areas, or in areas that are exposed to direct sunlight
for long periods of time.Also, when there are sudden changes in the ambient
temperature, malfunction may occur as a result of internal condensation.
If the items listed here are ignored, there is risk of death or
injury for the operator, or there is risk of property damage.
If the items listed here are ignored, it may cause injury or
property damage.
When using this product outdoors, pay full attention of
the safety of your surroundings.
As the main unit is a precision electronic device, avoid using
or storing it in areas where impact or vibration will occur, in
areas where strong magnetism is produced, or in areas
where static electricity is produced.
When the product is charging, do not place objects around it or
the USB charging cable.
Doing so may generate heat and cause fire or burns.
The Bluetooth word mark and Bluetooth logo are all trademarks that are owned by the Bluetooth SIG and
licensed out for use to ELECOM Co., Ltd. that are incorporating Bluetooth wireless technology into their
products.
Company names, product names, and other names in this manual are generally trademarks or registered
trademarks.
ELECOM CO., LTD.
URL: http://www.elecom.co.jp/global/
ov[email protected]
宜麗客（上海）貿易有限公司
上海市徐匯区肇嘉浜路１０６ ５甲号飛雕国際大厦７０４ 号
電話 ： ８６－２１－３３６８００１１
ＦＡＸ ： [phone]
ＵＲＬ ： ｈｔｔｐ：／／ｗｗｗ．ｅｌｅｃｏｍ－ｃｈｉｎａ．ｃｏｍ／
ELECOM Korea Co., Ltd.
5F Suam Bldg. 1358-17, Seocho2-dong, Seocho-gu, Seoul 137-862, Korea
TEL : [phone]
FAX : [phone]
URL : www.elecom.co.kr
ELECOM Singapore Pte. Ltd
33 UBI AVENUE 3 # 03-56.VERTEX SINGAPORE (408868)
TEL: [phone]
FAX: [phone]
ELECOM India Pvt. Ltd.
408-Deepali Building, 92- Nehru Place, New Delhi-110 019, India
TEL: [phone]
e-mail: [email protected]
URL: http://www.elecom-india.com/
ednet gmbh
Oberliederbacher Weg 36 D-65843 Sulzbach/Taunus, Germany
Telefon:[phone]
Telefax:[phone]
URL : http://www.ednet-gmbh.de/
Handling precautions
For proper and safe use
In order to use this product properly and safely, the following important
precautions must be observed.
Warning
Caution
Discarding the product
This product uses a lithium polymer battery for its internal battery. The lithium
polymer battery is a recyclable resource.
When you no longer need to use this product and the battery, be sure to
dispose of it in accordance with the local ordinances and laws of your area.
Other: Please also pay attention to the following items.
• Avoid using or storing this product in locations exposed to vibrations or impacts, in high temperature
or humid areas, or in areas that are exposed to direct sunlight for long periods of time.
• This product is a precision device. Do not drop it or expose it to strong impacts.
• Do not place this product in locations with high temperatures and high humidity (vehicle dashboards,
near heaters, etc.), in locations exposed to direct sunlight for long periods of time, in locations where
static electricity easily occurs, or in locations with large amounts of dust.
• When this product has become dirty, wipe it with a soft cloth that contains a small amount of water or
mild detergent. Using benzene or thinner will cause deformation or discolouration.
Precautions regarding radio waves
The band of frequencies used by this device are used to operate local wireless base stations
(wireless stations that require a licence) and designated low-power wireless stations (wireless
stations that do not require a licence) for the detection of moving objects on factory production
lines in addition to microwave ovens and other industrial/scientific/medical devices.
Before using this device, make sure that local wireless base station and designated low-power
wireless stations for the detection of moving objects are not being operated.
In other situations where some sort of problem has occurred such as when this device causes
an incident where radio wave interference is produced for a designated low-power wireless
station for moving object detection, contact the retailer from whom you purchased the product.
If this device has created radio wave interference for a local wireless base station for moving
object detection, quickly change the frequency that is used or stop using this product.
Used frequency band 2.4 GHz
Modulation method FHSS (Frequency Hopping Spread Spectrum)
Estimated interference distance Approx.10 m (when there are no obstructions)
Ability to change frequencies Uses all bands and it is possible to avoid bands for "local
wireless base stations" or "designated low-power wireless
stations"
About the internal battery
The battery is a consumable that deteriorates even under normal usage. This wear is a
property of the battery. It is not faulty.The internal battery is a fee-based repair, even within
the warranty period.
If the product is stored for a long period of time without being used, the battery's performance
will decrease.The performance will be restored after the battery is charged and discharged a
number of times.
The standby time decreases in environments with a low ambient temperature.
The lithium polymer batteries are recyclable resources.
Troubleshooting
Cannot hear the PC sound/cannot input audio from the microphone
Bluetooth audio may not be configured as the default device on the PC.
Check the settings with the procedure below and change the settings.
Click [Manage audio devices] on the control panel. The correct state is when
the [Bluetooth Audio] setting
on the [Playback] tab is
"Default Device".
Procedure to change
Double click the [Bluetooth
Audio] icon.
If it changes to "Default Device",
the setting is complete.
For the microphone setting, select
the [Recording] tab and perform the
same procedure.
No voice heard during phone conversation
With some mobile phones if there is a silence during conversation that is longer than approx.
20 seconds, the phone will automatically go into power saving mode and the earphone jack
will turn off sound input/output. Because of this, sound may sometimes turn off during
conversation. If this occurs, press the multi-function button on this product to take the phone
out of power saving mode.
Always ensure that the battery for this product is fully charged. If the battery is not fully
charged, charge it.When you no longer need to use this product and the battery, be sure to
dispose of it in accordance with the local ordinances and laws of your area.
This product does not have any power.
Try adjusting the distance between this product and the paired device. Also try adjusting the
volume, etc.
Line noise or echoes can be heard.
With some mobile phones it is necessary to manually set the microphone input settings to
ON. If the microphone input is turned OFF, your conversation partner will not be able to hear
your voice spoken from the headset microphone.
Your conversation partner cannot hear your voice.
You may not be able to set a ring tone for the incoming call sound on the Bluetooth headset
depending on the mobile phone model.
No ring tone
When making a call from the mobile phone, the speaker and microphone must be switched
from the phone to the Bluetooth headset. For the procedure, read the user's manual for the
mobile phone.
The headset cannot be used when placing a call.
For au, after the headset is used with other mobile phones, even if it is paired, you may need
to pair the headset again.
Pairing is required each time after using other mobile phones
Cannot perform pairing with a Bluetooth device.
If the phone is set to go to voicemail after a short time, the voicemail will kick in before the
call is forwarded to this product. If this occurs, set your phone to wait for a longer time before
a call goes to voicemail service.
The phone immediately goes to voice mail when an
incoming call is received.
With some mobiles phones, it may be necessary to press the multi-function button several
times before the conversation will start. If the phone will not answer after pressing the
multi-function button once, try pressing it several times.
When a call is received on the mobile phone, even when
the multi-function button is pressed it does not answer the call.
Please ensure that the device's Bluetooth functions can be used. If pairing mode cuts off due
to time out, it is necessary to perform the settings again.
Confirm that the device supports the profiles used by this product.
[Basic operation]
For iPhone4 After the call, change the sound output setting to LBT-VM01
(the device name for this product).
For Android After the call, press the Menu button and press the Bluetooth
button.