iLive IAEBTW59 User manual

Charging the Case
Using a Micro-USB to USB cable,
connect to the USB port of a powered
on computer or USB power adaptor (not
included) to charge the case.
Truly Wire Free Earbuds
User’s Guide for Model IAEBTW59 v2253-02
Charger Power ON/OFF/Power &
Battery Indicator LED
Flashing blue when charging.
Solid blue when charging is complete.
Function Button
Press and hold to power ON.
Quickly press twice to increase volume (RIGHT).
Quickly press twice to decrease volume (LEFT).
Quickly press three times to skip forward (RIGHT).
Quickly press three times to skip back (LEFT).
Press and hold to power OFF.
Charging Contacts
Charging Contacts
Charging the Earbuds
1. Open the cover and place the earbuds on the charging contacts. Be sure to
match the left and right earbuds with the correct docking station in the case.
2. Press the Power button on the case to power it ON and charge the earbuds.
3. When charging, the indicator LEDs on the earbuds will turn red. When charging
is complete, the indicators will turn blue.
Microphone
NOTE: Each earbud must be
powered on separately.
Once they are linked, powering o
one earbud will power o both.
Earbud Indicator LED
Red when charging.
Blue when fully charged.

Speakerphone
• To accept or end a phone call, press the Function button.
• You can also use the controls on the connected phone to
handle phone functions.
Charging Case & Auto-On Feature
While the case power is ON:
• Placing the earbuds in the charging case will
automatically power them o and begin charging.
• Removing the earbuds from the case will automatically
power them on, link them, and connect to the last used
Bluetooth device (earbuds must have been linked and
connected to a Bluetooth device already).
Linking Earbuds
To link the earbuds:
• Press and hold the Function button on both earbuds
until they start blinking blue and red, and they will
automatically connect to each other.
• When successfully linked, the LED indicator on the
left earbud will begin ashing blue and red, while the
other very slowly ashes blue. A voice prompt will also
announce when the earbuds have linked.
Pairing Bluetooth
Note: When using as a linked pair, the left earbud is the
main unit. Use the left earbud Function button to control
both. You can power on a single earbud to use as a single
unit if you wish.
1. With the earbuds linked, you can now connect to your
Bluetooth device. The LED indicator on the left earbud
will continue ashing blue and red, indicating it is ready
to pair to a Bluetooth device.
2. On your Bluetooth device, access Bluetooth Settings
and search for nearby devices. Select IAEBTW59 when
it is discovered. When successfully connected to your
Bluetooth device, the LED indicator on both of the
earbuds will blink blue once every 10 seconds and a
voice prompt will announce the Bluetooth connection.
3. Audio played through the connected Bluetooth device
will now be heard through both earbuds. Use the
controls on the connected device to play audio and
adjust volume.
Changing Earhooks
PLEASE NOTE: Due to the nature of truly wireless
earbuds, you may experience slight interruptions
with your audio in areas with multiple 2.4Ghz
bands or in high wireless trac areas.
Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@
dpiinc.com | Email Parts: [email protected]
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2019 Digital Products International (DPI, Inc.) All
other trademarks appearing herein are the property of their
respective owners. Specications are subject to change without
notice.
FCC Warnings
WARNING: Changes or modications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent re or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
• To avoid hearing damage, make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
WARNING : This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This product meets and complies with all Federal
regulations.
When changing
ear hooks, be
sure to match
the right and left
sides. Note the
marking on each
earhook and
earbud.
Align the notch on the
earhook to the notch
on the earbud.