Electric Roots SUPERCRACKER User manual

SUPERCRACKER @ Electric Roots
Version 1.0
10/19/2020
SUPERCRACKER
You're taking a bath with your hair dryer, you like bungee jumping without a
rope? You always take it one step further? A regular boost just isn't enough? Try
our Supercracker. It will give you the ridiculous boost you always dreamed of!
42x30mm

SUPERCRACKER @ Electric Roots
Version 1.0
10/19/2020
Knobs
LOUD
Controls the amount of gain
BOM
Resistors
R1
5k1
R2
10M
R3
10M
R4
100k
R5
1M
R6
1M
R7
CLR
Capacitors
C1
100nF
C2
10uF(elec)
C3
N/A
C4
100uF(elec)
C5
100nF
Transistors
Q1
BS170 /
2N7000
Q2
2N5457
Diodes
D1
9V Zener
D2
1N4001
Potentiometers
LOUD
C5k
Other
SPDT
on/on

SUPERCRACKER @ Electric Roots
Version 1.0
10/19/2020
Suggestions
Beware of Counterfeit components, if you want quality products, order a kit, don’t
use ceramic capacitors over 1nF they tend to have microphonic characteristics
in some setups.
The 2N7000 can be replaced with BS170, just flip it 180 degrees!
Wiring

SUPERCRACKER @ Electric Roots
Version 1.0
10/19/2020
Notes
CLR is usually 4k7 – 10k. The value depends on how bright you like your status LED.
Mods
Try a different diode for D1

SUPERCRACKER @ Electric Roots
Version 1.0
10/19/2020
Schematic
License
By buying and using this product you confirm that you have read, understood
and accepted our Terms and Conditions (electric-roots.com/termsandconditions).