The loop number can be changed when the 45000 is either idle (stopped) or playing
back a loop. You cannot change the loop number when recording or overdubbing the
loop. If the 45000 is playing back a loop at the time you press either the LOOP UP or
LOOP DOWN footswitches, the 2-digit display on the Foot Controller will blink the
new loop number, indicating that the 45000 will change to the blinking loop as soon
as the current loop plays out to its endpoint. If the newly selected loop number is
empty, it will continue to blink until you stop playback or enter overdub, at which
time the loop number will return to the last loop that was loaded.
The 45000 remembers the last Play setting for the following parameters of each loop
number: TEMPO slider, REVERSE button and OCTAVE button. When you go back to
any given loop number, these parameter settings will be reinstated for that loop.
The LOOP UP and LOOP DOWN LEDs light up when each associated footswitch is
held down.
RECORD Footswitch and LED –Pressing the RECORD footswitch on the 45000 FC
is equivalent to pressing the RECORD button on the 45000 main unit. Usually
pressing the RECORD footswitch toggles between Play and Overdub modes. If you
load an empty loop number, pressing the RECORD footswitch will immediately begin
recording a new loop (or start the 4-beat count-in when Quantize is enabled). In the
situation where you want to create a completely different loop for a loop number that
already contains audio, you need to first press the NEW LOOP button on the 45000
main unit, then press the RECORD footswitch on the 45000 FC.
The RECORD LED on the 45000 FC mimics the RECORD LED on the 45000 main unit.
In addition, the RECORD LED on the 45000 FC lights when the RECORD footswitch is
held down.
PLAY Footswitch and LED –Pressing the PLAY footswitch on the 45000 FC is
equivalent to pressing the PLAY button on the 45000 main unit. Usually pressing the
PLAY footswitch will start or stop loop play, though it will also end a loop when
recording a new loop.
The PLAY LED on the 45000 FC mimics the PLAY LED on the 45000 main unit. In
addition the PLAY LED on the 45000 FC lights when the PLAY footswitch is held
down.
TRACK SELECT Footswitch and LED –Pressing the TRACK SELECT footswitch on
the 45000 FC is equivalent to pressing the TRACK SELECT button on the 45000 main
unit. You can use the TRACK SELECT footswitch to cycle through the four tracks
when recording loops in a live setting without needing to touch the 45000 main unit.
The TRACK SELECT LED on the 45000 FC lights up when Track 1 is selected but
shuts off when any other track is selected. If Stereo Mode is enabled on the 45000,
the TRACK SELECT LED lights when the Track 1 & 2 pair is selected. Additionally, the
TRACK SELECT LED on the 45000 FC lights when the TRACK SELECT footswitch is
held down.
-INPUT JACK -
Insert a standard 1/4" mono guitar or instrument cable into the INPUT jack of the
45000 FC. Plug the other end of the cable into the FOOT CONTROLLER jack of the
45000 main unit.
- POWER -
Power for the 45000 Foot Controller comes from the 45000 main unit, through the
1/4” instrument cable. The Foot Controller does not require batteries or a separate
AC Adapter. Its only source of power is the 45000.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term. If you should need to return your
unit for service within the warranty period, please include a brief description of the
problem as well as you name, address, telephone number, copy of your receipt, and
a check or money order. The costs for shipping and handling are listed below.
United States - $12
Canada - $15
Europe and other countries - $25
Ship to:
Electro-Harmonix
C/O New Sensor Corporation
55-01 2nd Street
Long Island City, NY 11101
Attn: Service Department
Please make checks/money orders payable to New Sensor Corporation.
To hear demos on all EH pedals visit us on the web at www.ehx.com.
Email us at info@ehx.com
